Frage von videorot:
Hi,
I have now bought a new SDHC Class 10 with 32 GB.
When you insert the card in de camcorder is the message
"Recording in FXP mode impossible on this card.
The FXP mode means "high quality 17 Mbps"
Conversely, XP + mode "means high quality 12 Mbps"
Does anyone know the problem?
Can this card in FXP mode are not actually used?
I'm looking forward to your answers.
Greeting
Kurt
Antwort von markus-s:
Card exchange and compatibility for Call Manufacturer. Of course, a Class 10 SDHC (10MB/sec so minimal, so 80Mbps) in principle suitable for the higher mode, but either the card or scrap your Cam is not 100% SDHC compliant.
But what that has to do with Edius?
Markus
Antwort von iMac27_edmedia:
Manufacturer of which is because the card or
Your Cam simply can not read SDHC cards, 10x,
even with an update to JVC 10x SDHC card was required.
What does your manual to the problem
probably stands as sufficient the 6x SDHC!
Antwort von videorot:
Additional supplement.
The card is EXTREMEMORY 32GB SDHC Memory Card Class 10 - 22 MB / s
is in the description in the Canon Manual
"We recommend to use the memory speed class 4 or higher."
Greeting
Kurt
Antwort von markus-s:
I use the card itself - in NER Panasonic SD707 and s.PC. No speed problems, the contrary, very satisfied. So either you've swallowed your ne lemon or are Cam s.Class 10 - what is more likely. Test the map s.PC times (with a clever reader).
Markus
Antwort von Modellbahner:
Yes, but only up to Class 6 Later there was not at the time. There are already several posts about this issue. The expensive card does not need the Canon HF10. I run a HF200/24Mbs with a Class 6 without problems.
Bernd
