Frage von Jörg:in this post
The Prices for finished, professional Shoulder mounts lie partly in areas already hard to breathe let amateurs.
I once synonymous DIY solution to think about one that a party with friends discussed at the ladies gave us willingly go-ahead, time in the workshop to disappear for some.
12 mm copper pipe, some fittings, a nice piece of ash was quickly cut, soldered and turned, Color up slightly, about 60 minutes later, the DIY done.
Of the old Cullman Thats has spare parts in the box, a
Padding is considered.
The implementation of follow focus, lighting and monitor is on this platform very quickly.
Mounting plate for counterbalancing or Nano Flash is riveted
Who against biting comments of others can make passage on, has a few knots restrained image, the slight wobbler in the post very quickly restrained.
Antwort von glider_pilot:
Looks interesting.
I am now synonymous for some time to find inspirations for rigs
what I would still be interested because, as you have fixed the base plate and the extension of light and monitor.
Thank you!
Antwort von Jörg:
The base plates are attached with pop rivets 4mm on the pipes, it can be rebuilt as required with relative ease.
The tripod plate holder is screwed on.
The lateral extension is an original Cullmannschiene.
But you can easily implement their own ideas.
Also a remote control camera easily fits the place.
Antwort von glider_pilot:
Okay, all right.
Thank you!