Infoseite // Floating stand for Panasonic HDC SD300



Frage von Jan12:


Hello everybody,

Now I bought next to my real work tool, the P2 is a small Panasonic HDC SD300.
This I would like to provide a balance with tripod. So what in the way of the Glidecam 1000, SCHWEBi or steady Wonder, like this in the price range.

The Cam is a fly weight, about 420-460 grams, depending on the Battery.
Does anyone have experience with such a small and light weight is a suitable "MiniSteadycam"? Perhaps a buy recommendation?

Best regards
January

Space


Antwort von fly-italo:

"Jan12" wrote: Hello everybody,

Now I bought next to my real work tool, the P2 is a small Panasonic HDC SD300.
This I would like to provide a balance with tripod. So what in the way of the Glidecam 1000, SCHWEBi or steady Wonder, like this in the price range.

The Cam is a fly weight, about 420-460 grams, depending on the Battery.
Does anyone have experience with such a small and light weight is a suitable "MiniSteadycam"? Perhaps a buy recommendation?

Best regards
January


Here, read:
http://forum.slashcam.de/welche-schwebestative-gibts-es-so-and-welche-ist-empfehlenswert-vp414042.html?sid=574e60870ea89441964a57d4e9a8f090 # 414,042


The Glidecam HD1000 works so s.580g correct, but the loads can be yes. But one can not expect a flat rate above only with weight, because in the end to build on top of it an "inertia" on and which depends not only on weight, but synonymous of the center of gravity and its distance from the fulcrum.

One can make the thing so unnecessarily difficult, or shift the focus;)

Space


Antwort von Jan12:

Quote: The Glidecam HD 1000 works so s.580g correctly

It is interesting to have that is now called the German distributor of the Glidecam and claimed s.400 gram runs up it stable.

How do we charge for a cam on reasonable? Just dranhängen weights works but not really sure, because of gravity. Unless one is tinkering a "serious" tripod plate.

I understand the report fly-italo, with a "to" light Cam, instead loads better adapt to the gravity well?

Space


Antwort von fly-italo:

"Jan12" wrote: Quote: The Glidecam HD 1000 works so s.580g correctly

It is interesting to have that is now called the German distributor of the Glidecam and claimed s.400 gram runs up it stable.

How do we charge for a cam on reasonable? Just dranhängen weights works but not really sure, because of gravity. Unless one is tinkering a "serious" tripod plate.

I understand the report fly-italo, with a "to" light Cam, instead loads better adapt to the gravity well?


My Panasonic GS250 with about 600 g could be set properly.
My new Pana 707 weighs as much as you and in the case 90grad the pendulum of a second is below. Next slide is not completely down and no weight is not synonymous, it is no longer above the camera.

Regarding the mass inertia. This can be optimized mathematically.
We can work with a lot of weight, or with clever geometry
and intervals of gravity.

A similar example: A house with 100m ² can be built with 10mx10m and has 4x10 = 40 meters in circumference of the walls, or synonymous with 100m x 1m then you have a total installed 2x100m +2 x 1m = 202m masonry. Both are 100m ², but blocks it takes 5 times as much, in the second version.

Theroetisch it can happen now, if you auflastet the cam on my old weight of 600g, it is still not enough, because the emphasis of the old camera was higher than the new cam with the "deep" s.Boden Auflastgewichten built. Tomorrow I play again with the loads around, then comes something else, what I ordered.

I will not stop to pack pounds on it so easy NEN is rest, but only the maximum need, ok? If eh already permanently recorded without arm synonymous;)

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash