Infoseite // Matrox rtx2 with Adobe CS4, Halbbildprobleme??



Frage von Camreport:


Hello everybody,
After some searching here on the forum (I found nothing on the subject) I am writing this post now with the hope that I can help someone:

* * *
I run the Matrox rtx2 together with Adobe CS4 on a win-Calculator with Win7 / 64 bit Pro. Detailed system information check the following link: www.landeinet.de / VIP / FehlerMaPrem / System_Info.zip

The system works perfectly as far as synonymous.

Parallel I run CS4 on the same operating system but without the Matrox card on a laptop.

Following problem in which Adobe itself for almost four weeks to present a solution:

If I want to create and open a new Premiere Project (Matrox SD Project), is a field order / Standard the "upper field" when first selected.

Link to: www.landeinet.de / VIP / FehlerMaPrem / matrox_SD_projekt.jpg

As far as I know, would be as TV standard for SD projects generally the "bottom field first" selected for HD projects, the upper, right?

If I now with this SD-standard settings a video sequence into the system and disc reading / Timeline import, would premiere first-bit without the any was the question sequence-Edits
. Render
When reading out the clip properties also the upper field is first defined, synonymous when I'm in the preferences before the capture of this setting manually change it to the lower field.

If I want to read now against the clip on the media than, say, MPEG2 Encoder, and the lower half frame defines a new standard of the film will be read out blurred! To cross-check I select the top field first and then the clip appears to reflect "sharp".

Link to: www.landeinet.de/VIP/FehlerMaPrem/MPEG2_Auslesen.jpg

When I use the material created in this way but then will file with TV stations The same as the field order is incorrect & blurred rejected or challenged!

To the thing to get to the bottom, I've now tried the same as standard DV-PAL Project on the same calculator with the rtx2. Here at the preferences of the lower field is set as the first. After the capture of the clip is like everything else including render, read, reflect the same characteristics or come against the same phenomena as described above.

To test, I then uninstalled the Matrox and all the repeats.
Here I could not find these errors. Also, the clip was with lower field first after reading as MPEG2 absolutely fine and razor sharp. to observe the same Gegentest on the laptop without the rtx2!

Conclusion: This is true but something in conjunction with the premiere rtx2 and not is a bug in the Matroxtreibern / preferences or what you say to that?

Maybe someone knows the problem of you, I do something wrong, or has anyone of you an idea or solution?

* * *
I hope I have expressed myself somewhat understandable.
Since I am on a working system relies professionally it would be great if you could help me quickly or I for any tip of me further forward grateful ...
Best regards
Mike

Space


Antwort von Alf_300:

Mgeg eigengentlich should be but is the upper field or at different Mstrox

Space


Antwort von Camreport:

That's right, but the main problem here is already s.Anfang (as described) of the chain.
- Why do I have been rendering the material in connection with the Matrox although nothing worked, but only read?
- Why is ground up of SD, Matrox Project defines the upper field as standard and can not be changed synonymous?
- Why the material after the read is blurred?
- If I create the same project include reading on the laptop, the chain is continuously on the lower half frame. ALSO, as read as MPEG2. The picture here is sharp and there is no objection

Greetings Mike

Space


Antwort von Alf_300:

The chain's fine but if you manually turn änderst what is the wier have found you wrong.
NLE editing cards have just their own lives

Space


Antwort von Camreport:

if the chain would be okay, why do I render the material even though nothing was edited out? why the material (synonymous appears in the preview window) blurred?

I can, if one gives me a sender pretending to say that the bad is not so because the card does not allow the cut ;-)

fazit were here, another card or not. Nevertheless, the possibility that there are on an external monitor to play.

what would you recommend for me for a system / card?
gruß mike

Space


Antwort von Alf_300:

When you are working on the system with map, actually everything should be OK. On the system map WITHOUT the codec is probably not work as perfectly as it should be synonymous without the functions of the card.
The same will happen if you map the times and removing your old Matrox want to edit video.
It follows that I recommend you NOT map a suitable solution to search.

Space


Antwort von WoWu:

@ Camreport

Unfortunately you have not mentioned it, of where and how you play along to your material, because it does not matter how the original was Filedorder, but also out on which interfaces you go.
Do you use the Matrox SDI, for example, necessarily the "first" Field is correct, since SDI is standardized.
Likewise, if you come from the Digi-beta, for example. Here also the field order is on the first field. However, only the 625 lines Matz. The 525 generates the "lower" field first.
But I'm assuming that you work in the 625 system.
Do you use SDI so you will always the "upper" field first have in the field order.

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash