Frage von timm4130:
hello,
one Thomann ichhabe em-9600 t-bone microphone and a Canon 550D.
now refers to t-bone usually the juice of phantom power - but I have a jack to xlr adapter connected to the micro s.die 550d to join and one AA battery, plugged in the micro. still works somehow but I hear nothing at test shots when I switch between normal and tele and switches off the microphone record sound but do not have it!
can someone help me?
Antwort von deti:
You probably have a broken / unsuitable XLR-TRS adapter. I can recommend s.einem other device with test input jack and if you're in a position to verify the pin configuration of the adapter.
Deti
Antwort von timm4130:
which seems to have been actually!
synonymous with the mac is not a ton I s.wenns back s.line in connection enstöpsel!
mist!
what exactly do I need for an adapter? are there any easy way synonymous saturn or something?
Antwort von deti:
If you have a meter, then you can test it for resistance (ohms) or put measure to pass inspection and if Pin 3 to ground (GND, so the upper part of the jack plug) and pin 2 goes to the signal (SIG, the lower part of the jack ). Pin 1 should not even go anywhere or to ground (GND).
Antwort von carstenkurz:
which seems to have been actually!
synonymous with the mac is not a ton I s.wenns back s.line in connection enstöpsel!
It works like eh not s.line Mic input.
Where is it the adapter, which you are using? Can you open the Male (metal sleeves)?
How many contacts, the Mini, 2 or 3?
XLR adapter you will not find on Saturn.
Can be anything at this stage, to an empty battery or a broken Micro.
- Carsten
