I have a problem and although I would like some pictures in my film racks. I did it with JPEG and PSD format, I tried but always a warrior Still flickering image as end result. With Pinnacle does it better, but I would like finally with Adobe Pro satisfactory results achieved. Can someone next to me help?
Gruss Werny
16WERNY081965-IN-GMX.CH
Antwort von Jörg:
Hi, right click on video clip options Halbbildoptionen-flicker reduce-ready. Leg Dir having its own shortcut for the future. The Pinnacle at something better than working at Adobe ..? Jörg amazed
Antwort von WERNER MISCHLER:
(User Above) wrote:
: I have a problem and although I would like some pictures in my film racks. : I have it with JPEG and PSD format, I tried but always a warrior flickering Still Image : As an end result. With Pinnacle does it better, but I would like finally with Adobe Pro : Satisfactory outcome achieved. : Can someone next to me help? : : Greeting Werny
Thanks for the tip, I've now tried with the method but I still have no satisfactory result obtained, it still flickers Imer easy. I've synonymous blurred images on the screen. What kind of format should I use and how big an image of the writer is on the screen is sharp?
Werny
16WERNY081965-IN-GMX.CH
Antwort von WERNER MISCHLER:
(User Above) wrote:
: Hi, from what source the images? What is the aspect ratio of pixels? : If the images as a half ago, if so, how is the order? : Werny, you will you deeper into the issue must capture DV editing. : Read here about what to deinterlace, fields, pixel aspect ratio, etc. : Angesammeelt is, then you is much easier. A size for flicker-free images do not exist, at least the Resolutionsollte PAL : Format Is haben.Als highest resolution 4000 x 4000 AP an.Allerdings it may Significantly larger pictures, because you have to rantasten how far the tolerance : Go. : There is plenty to read : Fear Jörg
Hello Jörg yesterday I got my DVD to a conclusion and have received very zufriedenstelende results. I did everything Müglich s.Material used Jpg Gif and BMP have with all the very sharp images. It seems that the program in difficult lighting situations very light contrast (here in the Maldives) is not so tolerant, since the flicker still edit was still visible. The images to shrink to 768 x 576 but makes sense. Thank you again for the tip antiflimmer! :-)
Gruss Werny
16WERNY081965-IN-GMX.CH
Antwort von Jörg:
(User Above) wrote:
: Thanks for the tip, I've now tried with the method but I still have No satisfactory results obtained, it still flickers Imer easy. I : Synonymous fuzzy images on the screen. What kind of format should I use, and : How big an image of the writer is on the screen is sharp? : : Werny
Hi, from what source the images? What is the aspect ratio of pixels? If the images as a half ago, if so, how is the order? Werny, you will you deeper into the issue must capture DV editing. Read here what so deinterlace, fields, pixel aspect ratio, etc. angesammeelt is, then you is much easier. One size for flicker-free images do not exist, at least Resolutionsollte The PAL format haben.Als Is highest resolution 4000 x 4000 AP an.Allerdings may be much larger images, since you have to rantasten how far the tolerance goes.
There is plenty to read Jörg fears
Antwort von WERNER MISCHLER:
(User Above) wrote:
:-AT-Werny : : Your description is typical of the photos, the unprocessed NLE into a purely withdrawn : Be. To top results requires some small preparations : Using photo editors: Graphics shrink to 768x576 px. : Easy to sharpen (thickness 3 of 10). : On side of 720x576 px. Alternative: Do not compress, then this is the : Self-editing program later. As BMP / TIF and save it into the editing program to import. : : In the editing program then under "Field Options" something like : "Fields always together" set, then the quality in : Generally optimal. : If you still have a flicker, then you can add tools to reduce interlace : Flicker or Smart Smoother access. One must however be clear, : That by the photographs held together laboriously the sharpness is taken again : (Lines are smeared). : Greeting Wiro
Hi Wiro
have now completed the DVD is burned and very good results erziehlt I did everything possible s.Material use GIF and JPG, BMP very sharp images with no flicker get. I've found it very kontrastreichedn images were problems (here in the Maldives). Thank you again for the super tip to shrink the images to 720x576 so I have the best result erziehlt :-)
Gruss Werny
16WERNY081965-IN-GMX.CH
Antwort von Wiro:
-AT-Werny
Your description is typical of the photos, the unprocessed NLE into a purely withdrawn. To top results requires some small preparations using image processor:
Decrease graphics on 768x576 px. Easy to sharpen (thickness 3 of 10). At the side of 720x576 px. Alternative: Do not compress, then this makes the later editing program independently. As BMP / TIF and save it into the editing program to import.
In the editing program then under "Field Options" as "always merge fields" setting, then the quality is usually optimal. If you still have a flicker, then you can add tools to reduce interlace flicker or Smart Smoother access. One must however be clear that by the photographs held together laboriously the sharpness is taken again (lines are smeared). Gruss Wiro
