problems with white beams and lines - a slight curvature
Frage von tpschulz:
hello people:)
the following problem:
both have built in dvd menu as synonymous in my white film "16:9" beams and white lines, which serve to screen subdivision (psd, jpg).
the white beam and all lines have a slight curvature (on the tv - the upper right corner) - this looks pretty crappy - what can I do?
The vertical lines are the upper right and the horizontal right down curved - light curve.
it can be s.der decoding? I have chosen the best quality in the encore think - before I had this not curvatures / browse but must again test old dvd's.
greetz @ all
Antwort von Udo Schröer:
Probably is a small geometry errors of your TV equipment. Compare your DVD playback on the PC with a monitor, if not there exists "You're safe.
Antwort von Markus:
Or / And you may have set Superweiß instead of video-white?
Antwort von tpschulz:
"Udo Schröer" wrote:
Probably is a small geometry errors of your TV equipment. Compare your DVD playback on the PC with a monitor, if not there exists "You're safe.
hi;)
on the pc and the projector, everything is ok - probably lies s.tv - but it is now the second in which it occurs: (
Thanks and good slide
Antwort von tpschulz:
"Markus" wrote:
Or / And you may have set Superweiß instead of video-white?
I put the controller in photoshop to full white - how then are the parameters for videoweiß (RGB)? ..
greeting and good slide;)
Antwort von Markus:
Superweiß = RGB 255 Videoweiß RGB = 235
Antwort von tpschulz:
"Markus" wrote:
Superweiß = RGB 255 Videoweiß RGB = 235
merci markus;)
following - have just arrived at home and have the menus and movies spotted again on the pc - this is definitely deformities occur only on the tv. just do not know more next - is related to the video synonymous with white?
greetz
Antwort von Udo Schröer:
Hello, because it is not on the PC, it is s.der geometry of the deflection yoke. This is in many 16:9 TVs are not 100% io In normal TV operation, it is not so striking. A readjustment is not easy if you have not done it yet. Due to the depth of its electron beam deflection can lead nich so well around the corner, which leads to the problem.
I would leave it so and the next move to the middle part because there the geometry is better.
Antwort von Markus:
Objects are "whiter than white shows," then this could lead to a distortion of the image. Some CRT TVs (especially older models) are very susceptible to.
Maybe you try on the changed views of white level, and reporting it to us of your experiences? ;-)
Antwort von Udo Schröer:
If white (kontrat) is set too high to broaden the depicted line, but has not resulted in error that it is in geometry.
Antwort von tpschulz:
"Markus" wrote:
Objects are "whiter than white shows," then this could lead to a distortion of the image. Some CRT TVs (especially older models) are very susceptible to.
Maybe you try on the changed views of white level, and reporting it to us of your experiences? ;-)
ok I tested the dvd s.anderen level screen - has come to have everything in order - my "16:9" beam of white light, although all but the krümung serpentine lines are the lines that were responsible for halving the screen no longer there.
apparently it was probably really only s.diesem tv (philips tv flat screen 16:9) - oddly enough, the problems occurred on my old TV is not on;) - is probably a setting themselves s.gerät
And thank s.alle nen guten slip again;)
Antwort von mdb:
"tpschulz" wrote:
apparently it was probably really only s.diesem tv (philips tv flat screen 16:9) - oddly enough, the problems occurred on my old TV is not on;) - is probably a setting themselves s.gerät
The linearity of the Philips-16 :9-flat tubes seems to be not the best for me is not synonymous to the net because I have read many times complaints.