Frage von explorer1:
Hello,
I Problemme in Analogaufnahme with the DV500 and Premiere 6.02.
The recording starts normally but after about 1.5 minutes makes them a break of approximately 30 seconds then it goes next and then a pause and then next.
I worked on Windows XP Home SP2 and the drivers for the DV500 have instlliert version 3.0 with Pinnacle DV500 DVD 4.5 + Patch 4.5a.
Hardwaremeßig I use an AMD processor with 1.34 Giga and 1,25 Giga RAM, HD 120Giga/7200U.
Please help.
Explorer1
Antwort von Markus:
Hello,
is your A / D converter (Pinnacle DV500) connected via Firewire? Then you should post about this:
Firewire patch for SP2 /
Windows XP
Antwort von GhostDog:
Thanks Mark,
it is not true.
It is about the Analogaufnahme of
VCR via the black box (Analogeingenge)
to Pinnacle DV500.
Trozdem thank you.
Explorer1
Antwort von Markus:
Hello,
as fast as I do not give up. ;-)
Is on the hard drive space available? Have you defragmented it again? Running Programs any other (especially antivirus) in the background? If the capturing of the analog connections to the Pinnacle DV500 previously working properly? Do you have a new interim Programs, Drivers, SP2, etc. installed?
Again to clarify ... we speak of the depicted hardware? (When I read your post the first time, I thought "DV500" first s.den JVC GY-DV500 ;-)
zum Bild
Antwort von GhostDog:
Hi Mark,
indeed, it is the hardware of you pictured.
I have a large hard drive 120Giga only for capture.
It is quite empty and defragmented.
Fours protection program is disabled as the firewall.
Operating system Windows XP SP2, as described.
The card I have used bought for my Sony Digital 8
To relieve DCR-TRV740E. Until now I have digitized Analogeaufnahmen (VHS) with the help of this camera (> Analog> i.Link> PC)
I did not want any more cumbersome.
The installation of the DV500 strongly discouraged as followed:
Installing Adobe Premiere (6.0 then 6.02)
Installing Hardwrae
-Pinnacle DV500DVD 4.5 v. 3.0 with drivers installed
Install Pinnacle DV500 4.5a patch.
I believe I have answered all questions.
Have you any idea what could be the problem?
Thanks
Explorer1
Antwort von Markus:
Hello,
I slept about it again, but something new would not occur to me at a distance. : - /
Maybe someone else knows something else or try to clarify?
Antwort von explorer1:
Hi Mark,
Thank you for your willingness to help.
Let's see ... möglicherwise notify someone
Problemm of the same as I had and
I can help with his experience.
Nice Weekend
Explorer1
Antwort von Ephraim:
If the computer detected 500 at the start of AP?
Does the DV 500 times already works with Firewire?
in Device Manager under "sound - and video - and game controllers"
"Pinnacle Systems DV500 E4" and
"Pinnacle Systems DV500 Overlay" appears without conflict?
Bluebox is spent on an analog video signal?
I had similar problems after the update of WP 6.0 to 6.02.
Then helped the transition of the computer on Standar PC. Although Microsoft says that creates no conflict with XP, but what is not when everything is said ;-)
Schönes WE
Ephraim
Antwort von GhostDog:
Hello s.alle,
This morning I found the solution.
I have looked at the IRQ assignment.
There are vielle other cards have the same IRQ as evidenced by the DV500.
A conflict was not shown, however, although it has been found that
the DV 500 and the LAN card does not bear the "have".
Solution: simply
disable for the time of recording the
LAN card. I have been able to transfer as a test film of a 2 stundigen VCR to HD without Problemme.
Greeting s.alle un vielle Thanks
Explorer1
