Frage von kiteschlampe:
Hello,
I am now after nights with attempts to have beaten ears, because I like the HDV material s.besten treat, I noticed the following:
In the Capture programs CapDVHS and HDVSplit do I open the program, the cam is switched on (Canon HV10) Firewire connection.
Now I turn the cam lever of the "Play" to "Camera" and I have the live image in the calculator.
Have tried to synonymous Capture - goes smoothly.
The stream is almost not on the tape, but directly in Calculator.
Now my question:
There are certainly some among you checker the signal times can scan to find out whether this signal has already been on 25.000kbps runtergetriggert.
If not, you could but on the firewire interface which is more clearly being made, the signal readout synonymous and only in compremieren Calculator?
What struck me in this regard is yet noticed:
Is HDVSplit in the preview window will open with tape holding (m2t) I can see no end Fhler because the calculator is too slow (at least, says the error message)
In "Life" is the Capture Picture 1A erste Sahne.
What does that tell you about this?
Gruss Chris
Antwort von Quadruplex:
There are certainly some among you checker the signal times can scan to find out whether this signal has already been on 25.000kbps runtergetriggert. If it did not would be my knowledge CapDVHS could not absorb it. Uncompressed HD is also more than one gigabit per second - the firewire not cope.
You can do it but synonymous try: Make with your camera simply pans violent and / or take-flowing water - if you are in these scenes block artifacts see coming HDV (ie MPEG-2) from the Camera.
Antwort von Parafuso83:
By Intensity map of black magic
http://www.blackmagic-design.com/products/intensity/
does that, if the camcorder has HDMI outputs. Did he SDI outputs, you need cards with SDI inputs. There is nothing more with firewire, since uncompressed HD material is transferred.
