Frage von Wok:
Hello,
I have a somewhat strange problem:
Some time ago I built a crane with LCD. Everything worked great, that I had the picture on the LCD monitor I had connected with the yellow video output. Today I had used the crane came once again but only a black picture with difficult to recognize contours. So I checked everything and found out that I have another picture on the LCD when I use the yellow
and the white audio plugs simultaneously connect. Unfortunately I can not do so because the whole wiring is installed in an enclosure with
a video RCA input. Can someone tell me where could be the problem ... but everything worked just yet ... I have changed nothing and was on the tube :-(;
Thank you ... Wok
Antwort von david2:
Really strange ...
Maybe the video cable (; yellow times) break;
Its ground connection would then get it over the sound.
Can you replace the cable again?
Antwort von Wok:
Can you replace the cable again? There are two video connections, is about both the same ... no picture without simultaneous audio connection ... a mystery to me ...
Antwort von david2:
If it's not s.Kabel is what will be on the board of the video coupler "sour". What else I can not think.
