Infoseite // NTSC-VHS Digitizer



Frage von id3839315:


Hello,
I am a beginner and has no clear answer to this question.
I want a NTSC-VHS video digitizer (either MPEG2 or DVD).
The VHS recorder converts NTSC to PAL60 format which is what the television easily reproduced.

On the PC sees it with the TV card is different.

I have tested various software:
Nero Vision 4, CyberLink PowerVCR II and VirtualDub

If I as an NTSC source, the picture appears in the correct position, but in black and white.

If I as a PAL source, the picture will appear in color. Nero Vision 4 and Cyberlink PowerVCR II, but twice.

In VirtualDub, it is not twice, but shifted up, ie the upper edge is cut off.

Is there a software with which the picture below can be moved or hardware that detects PAL60?
If not: Where can I get NTSC-VHS recorder to buy in Germany?
Or then there is the problem that the hardware is the NTSC signal does not recognize?

Hardware:
Panasonic NV-HV60
Pinnacle PCI PCTVpro

Space


Antwort von WeiZen:

Moin,
you need either a capture / TV card which allows you to PAL60 or a VCR to play NTSC 3.58 and there is no pseudo PAL converts. Then, all software should be able to be incorporated.
If there is only a cassette is, ask a TV Dealers times in order to standard conversion.

Space


Antwort von Quadruplex:

All the answers you find in this
Space


Antwort von id3839315:

Hello,
thanks for the replies.
My hardware is a Pinnacle PCTVpro PCI card with a chip CONEXANT FUSION 878a and in the forum I have found:
"The swallows BT878 chip definitely synonymous PAL60".
With DScaler is the Picture in any case properly and presented in color, it must be a software problem.

Space


Antwort von WeiZen:

Moin,
this is sometimes good.
Next question, how was the VCR connected?
CVBS (RCA) or Y / C? If Y / C (S-VHS "), the VCR really a Y / C output, or comes from a adapter?

Space


Antwort von digitalCat:

Hello,
the connection is composite, ie FBAS. The VCR has no Y / C output and the WDM Video Capture Driver Windows may not be synonymous.
http://btwincap.sourceforge.net/
mfG

Space


Antwort von WeiZen:

Moin,
well then it can only s.der software.

Space


Antwort von id3839315:

Hello,
I still have 'nen Link Found:
http://home.arcor.de/der_karl/NTSC/NTSC.htm

The problem is synonymous with the video codecs.

Space


Antwort von WeiZen:

"id3839315" wrote: The problem is synonymous with the video codecs.

In how far?

Space



Space


Antwort von id3839315:

Without the Picture codec is not so recorded, as shown on the screen is displayed, but provides a bit of slow motion.
Using a variety of MPEG-4 codec, the picture either blurry or is it only every 2 seconds Still image recorded.

Space


Antwort von WeiZen:

Who's doing something with MPEG4 codecs?!
If such an effort, then please synonymous with the codec in Karls example exists.

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash