Frage von premtirth:
I have some time for a Dazzle Hollywood DV Bridge bought used on ebay.
advance should I send that I s.einem Mac G4 with Final Cut work. synonymous've tried on the computer in my Cannon XM1 to convert the videos.
all of my trying to convert analog videos have failed.
the connection on the bridge running.
Bridge gives me the green light for A to D.
Connection between the DVD recorder via Composite and Bridge s.Scart connection - Bridge Of s.Mac / camera via firewire.
what comes in the Mac (iMovie or Final Cut Pro), or the camera sees
as follows:
Antwort von StefanS:
The box is
likely to NTSC, to say she thinks she gets NTSC, then digitized, but your Final Cut Pro PAL expected because correctly.
Workaround (works
mostly) Only the player up and running and "send", then only the box with power, then they are usually correctly recognizes that it is PAL act.
The box is actually quite sensitive, if the signal does not come across very cleanly, and when that happens very much like VHS.
WORKAROUND
1. (works
mostly) Take an S-VHS recorder, connect with S-Video, synonymous if you only have VHS tape
2. (probably always works)
TBC
Greeting
Stefan
Antwort von beiti:
I can confirm that the DV Bridge susceptible to bad input signal response. With tactful fair playback (eg of a digital receiver or a good analog tuner), there are never problems, but older VHS tapes have some stop-stroke problems.
A TBC is a good idea, either built-in VHS recorder or as a supplementary device.
