| Sony FX1 - NTSC <-> PAL for beamer projection
Next page Watzlaw Orguen:
März 2006
Hello!
I have gained me roughly a year ago as the FX1 PAL version. The problem now is that all graphics cards and presentation programs that I use the footage as well as beamer are trimmed to 60 Hz. This represents an interpolation and so unsightly Ruckeleien. Although there are several conversion programs, but provide no really satisfactory results ...
The solution would, of course, an NTSC model or the professional version of this camera was. According Sonyläßt the FX1 is not synonymous from the plant to switch to NTSC.
Nevertheless, the question: Is it possible to convert a PAL to NTSC FX1-FX1?
If someone happens to have a NTSC and PAL would like to swap them :-))
Thanks for Eurre answer!
Watzi
Reply Markus:
If someone happens to have a NTSC and PAL would like to swap them :-))
I'll crazy! So far I have always read from the opposite case, that someone is on vacation, "accidentally" a (cheap! Bought) NTSC camcorder and now would rather have a PAL model.
Just looking
Reply beiti:
Have you already tried out one FX1 in the 60-Hz version? Actually showed the better pictures in the projection?
Reply synthflut:
Yes, I projected 60 Hz - Movies: The little stuttering when zooming or fast movements were not before ..
Reply beiti:
I still think that the problem in the used reproduction technology (graphics card, etc.) is situated. It would be ridiculous if 50 Hz movies could not be smoothly projected. The problem that might otherwise be quite a lot of people. ;-)
Reply superloony:
The problem lies in the claim that one has.
Definitely have this problem synonymous people who - for whatever reason always synonymous - 50 Hz to 60 Hz must hochinterpolieren films. Certainly, there are many algorithms and many tools that can more or less well (online or offline). But the fact is that it is always better to project a 60 Hz - Film synonymous with 60 Hz.
So I now just looking someone who has the FX1 - versehentelich or intentionally - bought as a NTSC model to replace my PAL-FX1 to ...
I need to stop the film to 100% only for projection - I sell them or do not s.Fernsehsender not DVDs like this ...
Gruss
Heiko
Reply wolfgang:
It has always amazed me, how few people noticed this problem until 50/60 Hz. Depends perhaps synonymous with the fact that they hold the very first HDV with a massive look like? Or rather the fact that we have learned to perceive it as normal? Probably the latter.
The correct Lösungweg but is less exchange with the FX1, but vision devices to look for that can correctly handle internal 50 Hz (and not just go with 60Hz and jerk).
We were synonymous already discussed here:
http://videotreffpunkt.com/thread.php?threadid=1744&boardid=46&styleid=6
Stipulates that the Philips is one of the few devices that does not exhibit this behavior - as my tests showed. It's just a question that the internal LCD or Plasma 50 Hz can correctly handle import (to which all devices).
So take: FX1, are with a test strip on fast panning on it - and play in Media Markt etc.. So you can find out these devices do not have this problem.
Ah yes, the claim: the costs to be Money. The said Philips is the same time was more expensive by about $ 1000 than comparable devices. I have yet synonymous rather then bought a cheaper plasma, the stop a bit jerky. One should not do so anyway soo many pans during the shoot ...
:)
NTSC-Format
 NTSC Aufnamen with NTSC Camera with Media Composer or Final Cut Pro 4 capture
7d disadvantages and NTSC 60p
Premiere Pro timeline PAL to NTSC DVD (Encore)
Scentscape: home theater with fragrance module
Liquid 7.2 of PAL convert to NTSC.
NTSC or PAL 60p 50p??
Combs, remove if possible NTSC
NTSC and PAL on a DVD
NTSC-PAL Camera in environment
NTSC HDV 60i material in HDV 50i convert
Camera NTSC and Pal?
With EDIUS Neo2 Booster NTSC to PAL convert possible?
SonyZ1 displays NTSC HDV footage from tape NOT
Beginner question about NTSC
Final Cut and PAL -> NTSC transfer?
Canon XH-A1 Model NTSC - PAL umnormen on!
PAL tapes to NTSC Camera
Encore CS4 - NTSC auto Menu
Canon HF S 10 - NTSC version and Final Cut
NTSC VHS tapes digitizing In HD? H.264 DV AVI??
PAL-Format
Videos by encoding pale
HD DVD authoring to Pal
Premiere Pro timeline PAL to NTSC DVD (Encore)
HDV to PAL (4:3)
Pixel aspect ratio D1 / DV PAL 16:9 (, 1.42)
Magix Video Deluxe 16 and 16:9 PAL - DVD problems
DCR-TRV210E PAL: DV OUT -> Firewire s.Mac?
Full HD quality better in PAL synonymous final output?
GH2 / Pal version does not support 25 FPS - please send mail s.Pana!
TRUE 1080p in PAL convert and burn a DVD?
Liquid 7.2 of PAL convert to NTSC.
NTSC or PAL 60p 50p??
Resharpening of SD - PAL - Videos 2
NTSC and PAL on a DVD
Separate PAL DVD in Japan / America playable?
GoPro HD Firmware Update: Now synonymous with PAL
AE animation in 16:9 PAL DV blurred in Premiere
Pale Movies in 3D - SZ-Article
NTSC-PAL Camera in environment
PAL DV 16:9 on which monitor
Sony FX1
Sony HDR-FX1
Datavideo DN60 with SonyFX1
Canon XH-A1 or SonyHDR-FX1 - which is better?
SonyFX1 too dark
FX1: external or internal microphone to interview?
SonyFX1 is not recognized s.PC
FX1 cassette no longer goes to
Achromat Brevis35 SonyFX1
The best bands for SonyFX1
Mic / Controls for the FX1?
SonyHDR-FX1 purple stripe / BAR in the PICTURE? WHAT IS IT? HELP!
FX1 / FX1000
Tip FX1 need to: counterpart?
S.FX1 firewire port does not work!
how do I via MAC & HDR-FX1 in real time?
Microphone holder FX1/Z1
FireWire 800 / FireWire 400 with Sony Sony hdr-fx1
FX1 and FX7 from USA?
Macro lens for FX1
Comic margins on BM Decklink Studio and SonyFX1
SonyFX1 problem ... is based s.and
| |
