Frage von HaiKai:
A nuisance s.der SonyV1E is far out of the side following the Male XLR microphone. Particularly during transport in the camera bag is the microphone cable kinked and Male and Female are unnecessary mechanical loads.
A five-Lötübung will help:
Just the standard straight XLR Male connector, the angle variation of Neutrik exchange. The cable outlet is in 45 ° increments and adjust as ideal s.die Camera adapt.
The end result, you can look here: http://scubavideo.de/archives/116
HaiKai
Antwort von Markus:
The same had been already made in the PD150, and then the PD170 and now ... - Why Sonydas Microphone not the same with an angle connector equips?
@ HaiKai: If you want to change the times in a 90 ° angle to the left is bent, the cable schrammt not s.Zoom and focusing ring. This is the second XLR connector hidden. - Should an additional microphone can be connected, which comes standard on Channel Microphone 2nd How can both s.den camcorder microphone can be connected.
Antwort von HaiKai:
@ Markus: your proposal, I had briefly suggested synonymous times but again, because the V1 has a switch, the audio input 1 in either channel 1 or channel 1 and 2 sets. I find it handy to channel 1, the micro-camera and on channel 2, a radio link to have that I can switch off in between.
LG,
HaiKai
Antwort von Markus:
It plays no role because you are in the Postpro anyway select the desired sound, the content or the picture fits. And if the soundtrack 1 is empty, is the 2 duplicated.
But no preference, hauptsache it works. :-)
