Infoseite // VHS to DVD on a new Aldi Medion PC



Frage von ange322843 (a) aol.com:


Hello,

After I wundgesucht me any results in various forums and nothing understood, I shall briefly explain the words of a Novice with what I have done to with my Aldi Medion PC of 2005 and the software program PowerCinema my old VHS Cassettes to digitize and burn it to DVD. Maybe that will help other beginners synonymous.

In addition to the PC, I used:

- An old standard VHS VCR with scart socket (which is the large, rectangular 21-pin output, which in my rear s.VHS recorder).

- A cable with SCART or RCA composite connectors (the part of the scart cable has an in - / out switch, which should be on "out" and goes s.anderen end over three times smaller in the white colors and have red) (for stereo sound) and yellow (for Picture. The cable has cost 15 euros, you get probably synonymous cheaper.

- DVD-Disks DVD-R

I then proceeded as follows:

- I plugged the scart cable into the VHS recorder (switch to "out").

- Have the three RCA plugs into the PC times ahead in the appropriate color-coded connectors.

(To note: The whole of cables and connectors can be seen to not necessarily what they actually do. Some are only inputs, different outputs, some both. The Scart cable around, not all of the 21 poles to be assigned, etc. If anything, therefore not works better ask somebody again, whether you have the correct cable first, and secondly, whether it synonymous in the correct jack plugged).

- Now I have called the program "PowerCinema" on the computer.

- Click In Cinemas power to "TV"

- Then click on "Picture Source"

- Little bit there, "Composite 1" (click the scroll, we see this option at the bottom not at first glance)

- If you now have a VHS tape into the VCR connected as described above is happening, you should see the VHS video on the computer screen.

- Now just in the menu that appears s. below the screen of the screen when you move the mouse, click on "Record" (the button is the red square).

If the film is finished, click "Stop" (which is the white square button far left).

Done. The program has the VHS video is recorded and digitized while () in mpg.

Now you can have the file on DVD burn (for me PowerCinema put them in the directory ... / my documents / own video / TV recording), as also of the Aldi supplied program "with Nero.

To note: The program "Power Cinema offers the recording qualities of" good "," better "," optimal ". In a 90-minute film, you should leave the default option of "good" because the other two options, the finished file (s) is usually so large that it no longer fits on a DVD).

That's it. So, with the new PC with TV card for analog and digital TV, you do not need an extra A / B converter for converting analog to digital signals, or recommended for older computers, passing through a digital camera with an analog input.

Hope you come clear with this description.

Regards, Angela

Space


Antwort von Touri1:

It has class-work.
Thanks for the detailed description.

Space


Antwort von Markus:

"Angela" wrote: ... (the part of the scart cable has an in - / out switch, which should be on "Out" ...
Theoretically, the switch position INTO been correct, but I have been staying synonymous scart adapter, which were different and labeled with the indication of direction did not mean the scart page.

Learn More:
About Scart inputs and outputs

Space


Antwort von beiti:

"Mark" wrote: "Angela" wrote: ... (the part of the scart cable has an in - / out switch, which should be on "Out" ...
Theoretically, the switch position was correct IN
All switchable scart adapter that I have ever got my hands on (and those were some) were then labeled as described of Angela. I was completely new, that it is synonymous others.

Space


Antwort von Markus:

That's interesting. If the logic of the labels have meanwhile changed?

How could I explain that in an output signal to go in? Who is purely an output? (Except maybe some of our contemporaries in the movies). ;-)

Space


Antwort von beiti:

Thus, a adapter has indeed two sides. I realized I hold that "relates to" and "out" on the RCA page.

Space


Antwort von gaechte:

everything perfectly describes only radioed for me unfortunately.
Would like to dub video from analog VHS recorder to Medion PC.
My scart times but with only 8 pins.
Can this possibly be the reason?

Space


Antwort von beiti:

"Gaechter" wrote: everything perfectly describes only radioed for me unfortunately.
Would like to dub video from analog VHS recorder to Medion PC.
My scart times but with only 8 pins.
Can this possibly be the reason?
Yes. This partially occupied Scart plug transmitted in one direction only, and are therefore not synonymous sets in - / out switch, with which one direction. For example, these camcorders are often located in adapter, with which one can transmit the signal from the camcorder to Television Scart. Such adapters can we not use to in reverse direction, for example, by the VHS recorder to your camcorder (AV transfer-in) or to the computer - just because they are occupied s.der scart the wrong side PINs.

If there is an incomplete Garnished with two scart connectors scart cable, the case is simple: Then you just have to use the other way.

Space


Antwort von hallo erstmal:

Hello, I have long searched for a solution to my problem and think a very good solution to have found, however, I still have a problem s.folgender passage:

"ange322843 (s.aol.com" wrote:

- Now I have called the program "PowerCinema" on the computer.

- Click In Cinemas power to "TV"

- Then click on "Picture Source"

- Little bit there, "Composite 1" (click the scroll, we see this option at the bottom not at first glance)



When I click it and start PowerCinema TV, I think niergends "Picture Source" - can someone help me s.der place?
Where should I find it?

Dnake now actually!

Space



Space


Antwort von hallo erstmal:

I think I made a small step forward: I found a setting option, where I once could choose between cable and antenna: the "Folder" TV settings, but is recording source and I can select just ONLY antenna or cable, next, unfortunately, nothing - according to instructions it was supposed to be composite.
My question: Am I landed s.einem wrong place or what the reason might lie now?
In stands with me: Aufzeichunungsgerät: MEDION BDA Anolog Capture, I can choose synonymous MEDION BDA Digital Capture and MEDION BDA Digital Catur 001.
Then the following happens: The drop-down list, recording source is DVB-T or DVB-S, but I can no other setting (select the drop-down list is grayed)

Space


Antwort von Hilfe!!!!!!!:

Hello,
unfortunately I have another computer, and then this program is not on it, someone knows a program with which it comes and not expensive?

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash