Logo Logo
/// 
Fernseher als Kontrollmonitor an den PC anschließen

Television as a control monitor s.den PC



Frage von Pete21:
Oktober 2008

Hello,

I have a Television s.den PC to Premiere Pro CS3 the picture on the television to be able to spend. The Television has a SKAT input. Both Connections s.der graphics card is already filled.

Is there a possibility?

Pete



Antwort von Johannes:

I have something done with the Camera. The Firewire cable s.der Camera then let them as external monitor or something similar and recognized the picture on the camera display cleverly. From the Camera via the AV output in the Television.



Antwort von JMS Productions:

"John" wrote:
I have something done with the Camera. The Firewire cable s.der Camera then let them as external monitor or something similar and recognized the picture on the camera display cleverly. From the Camera via the AV output in the Television.


Without going 100% to be sure, I said just now that my mind just goes with camera models, which have DV-IN. For all other models, this will not go ... But try it quiet times, then you (we are) smarter.

"Pete21" wrote:
Both Connections s.der graphics card is already filled.


And even if they were free, would bring you nothing, because you want but only the pure video output and not the entire computer screen with taskbar, clock, desktop, etc. .. or?

My tip: You can make it so, as John suggests (but does, I think, only with DV-IN-models) or you can make to other possibilities.

I do this example in conjunction with my analog-digital converter. It is always s.PC connected via FireWire, then you can use fine. The then converts the digital signal into an analog signal (synonymous vice versa) and then I'll give the signal via RCA to scart in my since my VCR and Television in another corner of the room and is so long I do not have scart cable, which converts the VCR Scart incoming signal into an RF signal and I can signal via a normal antenna cable (10 meter cable) comfortably and unobtrusively on Television guide. There must still stop the channel scan and the signal on a program to save space and voila :-) But first thing I am come that my VCR is-god-thanks to a built in RF modulator and has to be routed all the cables were needed I always Television abstöpseln and grind to a PC and then connect, as if I wanted to use the monitor. And then I had to put it back umräumen if I wanted to watch television. Quite annoying ;-)

One question I would have but if we're in the process: Can anyone tell me why when I output the video through Premiere (but synonymous over MAGIX) only Picture and sound do not? I get the sound then finally as a PC sound, but the picture on the monitor (television) and PC sound are not synchronously. Already have all the sound settings in Premiere durchprobiert - nothing changes?

Thank you very much








Antwort von Pete21:

What an analog-digital converter do I need it?



Antwort von wolfgang:

It is definitely only with DV-in, because otherwise the camera not as an A / D converter can serve.



Antwort von Pete21:

So with the possibility of a camera, I can rule out because I did not own. So, the A / D converter. What do I need it?



Antwort von JMS Productions:

"Pete21" wrote:
So, the A / D converter. What do I need it?


Now that's quite different, which is logically synonymous change in the price. The best look you look there, because you can watch each converter:

http://www.digitalschnitt.de/produkte/zubehoer/index.htm

For your project, you need a converter, however, the synonymous in the situation is an analogue signal output, which would be the cheapest converter ADVC-110 for 189 ¬.
I have the ADVC-300 and the quality of'm really impressed. The ADVC-110 but now quality is not necessarily worse than the 300, the 300 only has individual settings, which I need for digitization.

If you would only need the converter to the signal on the monitor output, it is all in my opinion a bit "oversized", in other words: The converter would be a shame to me. If thou converter while still synonymous can use to implement digitalization of the outcome and you can satisfy it, he is OK and fulfilled its purpose ...



Antwort von Pete21:

Thank you, I have the ADVC-110 ordered. It is sufficient for my purposes perfectly.

Thanks for all the answers.



Antwort von Blackeagle123:

Denk synonymous nor equal s.den RCA Scart converter if your TV does not have RCA inputs (which we actually could expect ...)! ;-)

May be a used camera with Firewire In / Out at Ebay favorable. I have such a device purchased synonymous to the video material to play and s.Schnitt a preview on the monitor to have!

Good luck with the device and greetings,
Constantin



Antwort von Burgi:

Hello everybody!
So I want synonymous as a television monitor s.Mac then! Did the variant with the Dv camera in my old tried, but now how do I get that picture on the camera? Do I have since in Camera mode or player mode, or how that works?
Villeicht me that those who could more precisely describe!
Gruß Johannes



Antwort von Blackeagle123:

Look at the instructions of the camera after. Normally just s.Mac connect program to open the program and press play s.der Camera Picture can be seen.
Evt. Camera must be synonymous to the "Play" - or "Playback" mode (mainly Panasonic). The camera needs to have Firewire-IN! And if you want the picture via AV output you want to activate the synonymous.

As I said ---> user guide!

Many greetings,
Constantin



Antwort von Jollitop:

"JMS Productions wrote:
One question I would have but if we're in the process: Can anyone tell me why when I output the video through Premiere (but synonymous over MAGIX) only Picture and sound do not? I get the sound then finally as a PC sound, but the picture on the monitor (television) and PC sound are not synchronously. Already have all the sound settings in Premiere durchprobiert - nothing changes?


Among the missing sound is unfortunately nothing I'm going to say, but to Asynchronität: If you have the video via firewire from premiere (and probably in all other programs synonymous) ausgibst, this is always (!) About 1-2 seconds later than the what you on the PC screen to see. It is really only for viewing and not for cutting.








Antwort von Meggs:

Asynchronous must nevertheless not be. In a world premiere at the playback audio settings to specify an external video device, and the sound of an ad-converter in the television source here. Then it is still delayed, but it synchronously.



Antwort von robbie:

"Jollitop" wrote:
1-2 seconds later


Schmarrn ... 12 frames, ie about half a second. Do not exaggerate.



Antwort von domain:

What about a TV monitor as a preview?
I have the Sony 40W2000 HDMI television monitor as a general increase, in Liquid apart of the timeline, etc. of a house from 42 * 23 cm large preview picture. And if I want then it will be in very good quality preview by clicking on the entire 40 "screen up with me during the timeline of this observation form very little interest.
By double-clicking again, is again the initial view in the NLE achieved, what more could you want?
That is the way, the MIM method (Monitor monitor)



Antwort von Meggs:

"domain" wrote:
What about a TV monitor as a preview?


The picture looks on a tube TV quite different than on a computer monitor. So his video for a tube TV will optimize the tube TV is a device useful as a preview.



Antwort von domain:

Who will probably still on a tube that want to optimize?
Nobody more and therefore have the newest Symphony Avid editing suites as synonymous of CRT monitors no longer, in any case, I could no longer find anything in LCD / TFT kept.
But I can already see, you're generally retro design lovers and tube love .......



Antwort von Meggs:

"domain" wrote:

But I can already see, you're generally retro design lovers and tube love .......


I have only your issue including a television monitor as a preview to be good enough.
Besides, do I optimize, in fact, much to tube. I make video recordings of plays and concerts, which are small to medium quantities ordered. An estimated 90% of which is to Röhrenfernsehern considered.



Antwort von Blackeagle123:

Can the "12-frames-problem" because somehow get to grips with when you work with firewire? For example, with an ASIO-compatible sound card or a g + nstigen cut card (a / d converter or Firewire output, etc.), or there is no possibility?

Many greetings,
Constantin



Antwort von Jollitop:

I have currently (still) RT.X100 Matrox video card in use, a real-time analog output has. I suspect that you have no such specialized hardware is not very far.




Antworten zu ähnlichen Fragen:
ATEM Television Studio - 1080i/50 und 1080p/50
Blackmagic ATEM Television Studio HD8: Neuer All-in-one-Live-Produktionsmischer
www.online-television.de - Was ist davon zu halten?
Atomos: Neuer Shinobi 7 HDR Monitor mit 2200 Nits, Touchscreen Camera Control, SDI uvm.
Field Monitor mit Camera Control für Canon R5C
Monitor & Control - neue Fernbedienungs-App für Sony FX3/FX30/FX6
ARRI ALEXA Mini LF SUP 7.3 bringt Unterstützung für Camera Control Monitor CCM-1
CDA-TEK 3C Cinema Camera Control v1.4 unterstützt Tilta Nucleus Nano
Teleprompter mit Autocue und Voice Control Deutsch
Syrp Genie One: Motion Control für Kamerafahrten oder -schwenks
Teradek TOF.1: Infrarot-Entfernungsmesser für das RT Wireless Lens Control Kit
ATEM Mini Extreme - keine Camera-Control
Motion Control Baukasten für Product Shots
Aktualisierter edelkrone Controller v2 - jetzt auch kabelbasierte Motion Control
RED Control Pro App - erweiterte Bedienung von V-RAPTOR und KOMODO für 500 Dollar
Canon Eye Control AF zukünftig in mehr Canon Kameras ? auch für Video?
Neuer Versuch: MAGIC POCKET CONTROL (4K - 12K)
DJI Mini 3 Pro mit DJI Smart Control Kalibrierung RTH Genauigkeit
Tilta Nucleus Nano II Wireless Lens Control System jetzt verfügbar
DJI verliert Patentstreit in den USA - muss DJI bald den Verkauf von Drohnen stoppen?
KI ersetzt den Himmel in Videos und macht den Tag zur Nacht
Gespräch mit den Editoren von »Avatar: The Way of Water« über den Workflow und ihre Arbeit.
Wann kann ein Monitor echtes HDR darstellen? Vorsicht bei den DisplayHDR Standards
Welchen Monitor für den Videoschnitt? Geht auch ein Fernseher ?
Vorschau/Gradingmonitor und zusätzlicher Monitor für den Schnitt

















weitere Themen:
Spezialthemen


AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avi
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Editing
Effect
Error
Film
Final Cut
Format
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Movie
Panasonic
Pinnacle
Pinnacle Studio
Premiere
RAM
RED
Recording
Software
Sony
Sound
Studio
TV
Video
Videos