Following problem: We have a meeting with SonyHD ner-cam rotated. Of course in HD. Then we have the project in SD 4: § cut with AppleScript. Now we have gebatcht the project in HD and what to say that the cut sequence has a different format than the raw material. The settings of the raw material and that of the sequence are identical. The problem is a thick black bar - similar to a letterbox for 16:9 PAL. The bars are not visible in the raw material but at. Where is the problem?? Now we have already tried almost everything but better because it was not ... Request for assistance as quickly as possible ...
Antwort von ReeBooT:
Normally I start a project with the settings for the format s.end what is needed. The raw footage can be otherwise, which fits you hold the Project to ...
Unfortunately, in my crystal ball can not see what you have done wrong ...
Antwort von PowerMac:
Have ye of early s.falsch recorded? You have to prop only change the sequence settings. But please more info! I recommend finalcutpro.de
Antwort von metal_head_82:
Thanks for the help but the problem has solved itself of itself;) The 4:3 material was slightly distorted to fit the letterbox on the graphics. We have overlooked for the batches. In other words, the ratio has simply not voted. After many, many mouse clicks, but is now synonymous fixed.
