Hello, I have before with the XH A1 to film (25p), and the result on 35mm film to make. Must I then when turning with the Canon, synonymous with 24p rotate? are synonymous or 25p? Because I believe in 35mm Movies are 24 p, würdeja that mean that my video "for longer runs, right? (Namely, per sec, 1 frame more) Come from the documentary field, and have no idea whether the calculator from the 25p do 24 or so, and even if, what would be clever, just in 24p aufzunehemen?
Antwort von PowerMac:
That is. With "25p" rotate, or prefer to 50i and then deinterlace and 25 @ 24 do. With good editing software (Avid / Final Cut Pro) is das In Final Cut Pro there is the Cinema Tools. This slows down the recording / actually the finished film before FAZen and like the sound on.
Antwort von Axel:
The cinemas simply put a switch in order of 24 to 25 fps, and if they are synonymous's verraffen, because no one remembers a difference. Except for Barbara Streisand, allegedly, their voice in the movie to find qietischig because the supposedly lazy projectionist EVERYTHING with 25 B / s show to early evening to make (March edition of the "cinema"). And vice versa? I looked after a test screening for a TV movie. Here, I had forgotten, at 25 fps mode. Later the director told me how important it would be that the film with the right frequency has been presented. He would have 100 times the things in the editing room would have seen it and immediately noticed when the film would run too slowly. Blabla ...
Antwort von quark:
aha, thank you, DCAS with the switch, so what in the direction I had already thought One question, if I am now with the XH-A1 F Ilme, then I should prefer very "brave" to remain in 50i to 24p and s.computer scale, or equal to 24p aufnehemen?
Antwort von beiti:
According to their own experiments, I have the impression that the acceleration of 24 to 25 BPS less disturbed than the slowing of 25 to 24 bps. But without a direct comparison, I would probably not remember. Who is a very fine musical ear has heard it might go. But these are the few.
I would rotate in 25p, FAZen to slow down to 24 B and then to the finished coils "25 frames per second" write it. If the demonstrators are observed, it is okay. If not, remember it probably synonymous None.
