Ne question again from the sector "embarrassing, embarrassing," ... attempts to keep it short and Painless'!
Boxing: Resolv A5 Active Studio Monitor Speakers / one pair
How do I get the boxes s.den Pc connected?
Available:
Pc with on-board sound card
I see it like this right?
2chinch jack cable from the PC into the mixer with RCA and then from the mixer into the speakers. XLR s.den boxes do not exist! Is that enough? Did not have one yet and no synonymous Money more: go) then eg. günsitge this part of Ebay?
Resolv A5 Active studio monitor speakers are naturally active, an amp, you need no longer there.
You need a cable that s.einem end times has a 3.5 jack and a red s.anderen end and a white RCA Male. Or, alternatively, two separate 6.3 jack.
In each case a time comes in the box and then the 3.5 jack male comes into the headphone jack of the computer.
Very cool ... now go at least schonmal a box:)
Have a mini jack to 2 RCA cable is the black and red .. but it just goes and the Red s.den cable boxes. Black Makes no sound. But now I know what I have to buy tomorrow:)
Thank you for the accurate reading!
Regards Moritz
Antwort von Moritzk:
Cable found in the RCA cables ... 2 a red a white ... but it goes back only one color and that is white (ie skin somehow synonymous not indicate that?
Antwort von MK:
Working cable synonymous times in the socket for the plug not working speaker, if it does not then the speaker is broken, otherwise the connection s.PC or the cable or pull in the mixer for the sound card all on just one channel.
Antwort von MK:
Addendum: If one is sometimes red and white in the other, are available over both cable (the one the right way, the other the left channel) or just a box to someone else.
Antwort von Moritzk:
So go both boxes, tested with the working cable! Have 3 of these cables would it be crass bissl if everything is kaput!
Antwort von MK:
Then maybe the jack s.PC NEN wobbler. There are so many ways it's not like ...
Antwort von joey23:
Black or white, in the case no preference. If you have followed Headphones s.deinem Calculator, and then at both sides?
Antwort von Moritzk:
Will probably be a wobbler s.Kabel. When I use the time a small piece from the Pc to pull out, then go synonymous both boxes, but the more subdued and it hums right terrible. When the two go head Page!
Time by the way what else:)
How do I get the sound in a single recorded interview on both boxes, that is stereo?
Antwort von B.DeKid:
"Moritzk" wrote:
....
How do I get the sound in a single recorded interview on both boxes, that is stereo?
Where you double the sound - eg left channel Maki and the right channel with NEM copy tool such as Audacity
Sometimes, taking synonymous NEN Converter and easily from the mono track NEN Stero Track make - for example with Super
...................
Sorry that I assumed that it not be active speaker.
Please do not. Then maybe not blender, speaks against a direct connection, nothing.
If you already s.Direktanschluss log just the boxes, buy yourself just not have one, so that you can not handle at all. Later views nen small Mackie or something. If necessary, a Behringer synonymous. But please, no DJ mixer.
Yes, embarrassing ... Stereo mini-jack-> RCA cable? Connect play back MP3 usual, as long as s.Steckern and wiggle cables and switches to play around s.den s.den boxes, up from both what comes out. If you have the fear that could s.Calculator hardware or software which does not agree, Walkman, iPhone, etc.? Connect to the test.
Seriously, at the level again is hard ...
If you have mono sound recording, you will use, with which you alter, generally allow the hardware of a channel to be distributed appropriately to the two channels (pan / balance). Just do not by any adapter etc. to Mono, you want already synonymous still basically working in stereo.
I'm looking forward to your question about the Windows Mixer ...
