Who has time with the ex 1 with 24 p (23.98) for Movie rotated - I need a few settings in a short animation which I later than 24 p Tiff must deliver --
Is it better with 1080 25 p to rotate and then the umzukonvertieren good or what mode of 23.98 and you have to convert these in exactly 24 p
Thanks for any help and type setting
Editing system Final Cut Pro on Dual 2.8 GHz Quad
Antwort von Lutz Dieckmann:
Hi,
So I've made several Kinospots. If you have no audio when filming is no preference whether 24 or 25p, then yes, you have no offset. Since the transmission format is on film 1920x1080, I would in any case of this use. Moreover, it is really sharper than 1280x720. Do you have audio is 24 useful, because you will not offset the need to adjust (about 4%)
Many greetings
Lutz
Antwort von zooom:
Hello Lutz,
thank you for the tip, had taken 24 p - looks after turning everything off - look to final animation with everything fits - Your Page and the tutorials are really good - if I have time I look really clean. Did you give me another tip for Movie Screenings run digital - because I have the extra cost gamma adjust?
Thank you
Joe
Antwort von Lutz Dieckmann:
Hi Joe,
this comes on the projector. Say it easy with the movies from.
Many greetings
Lutz
Antwort von MaxEmanuel:
Correct note however that most cinemas frames and want to have because the camera does not 24p but just 23.98 p spins and if you cut it so synonymous fit the frames with a longer spot no longer exact. A bit of tinkering then it is perfect;)
Antwort von Lutz Dieckmann:
Hi,
Shooting at long like the weight, in spots of 29 sec, the effect is not visible.
Many greetings
Lutz
Antwort von MaxEmanuel:
"Lutz Dieckmann" wrote:
Hi,
Shooting at long like the weight, in spots of 29 sec, the effect is not visible.
Many greetings
Lutz
Hello Lutz, because unfortunately, I must correct you. In the upcoming production of digital cinema spots in Germany, it is increasingly commonplace, not usual times, such as 15.30, or 45 seconds respected, but released after Kundenwusch and sense to go. Thus, it is synonymous important details like something Socher, 98 to accurately designate to exclude errors.
Already in a spot of 26 seconds in length and not only for 29 seconds making the difference noticeable impact.
24.00 x 26 = 624.00 frames 23.98 x 26 = 623.48 frames
Antwort von Lutz Dieckmann:
Hi Max,
arithmetically correct course. But I turn all the spots in 24p mode and there are no established half-images. The 23.98 is just an outcome from the original version of the current shipment of 16.2 / 3 HRZ. At least my camera spits out 24 images. So I have it synonymous to the timeline and audioseitig so no problem. As for the length of the commercials are concerned, as synonymous, I'm going to do right. My client always use just the 29 sec version because it is so that the ¬ 350, - for the FSK check saves.
Many greetings
Lutz
Antwort von MaxEmanuel:
Also true, half are not, of course, but the Biderfolge only in the extent of the system in verabreiet if they have a magical rate of 0.5 per are. As such they are, they are neither real nor arithmetically existent.
Nevertheless, the EX1 is a very good camera but the best format there is not synonymous. I have since we have Exen with this until now rotated about 70 films - all in 23.90 whether Movies, DVD or BluRay - until now it has worked well only synonymous, I have currently played in the event that we contract on Channel Socher material must fall back and this brings with Problme itself.
BluRay Movies and want to 24p as well as for online clips is - but then if something of the shot material times, as now, to the transmitters, but it is 25p or 50i wanted ...
I myself still struggling to define so that if I do not generally rotate and then 25p for Movies / BluRay simple conversion,
Lutz What do you mean?
Antwort von Lutz Dieckmann:
If a thought. I do it twice. Everything requires 25p, ie network, DVD and TV with 25p, I turn everything into the movie to be with 24p. Does s.Set, scenes that I just turn twice. I know beforehand what the script where should. With BR I have done nothing, my customers do not yet. To that extent, I know so synonymous still not enough.
Many greetings
Lutz
Antwort von MaxEmanuel:
This is a good approach and I think I try this a try.
