Hello, a friend would s.eine cheap Panasonic hmc150 come, however, the "us" version. He mainly wants to make web videos, dvds occasionally. Would there be major problems with the model type (30p, 60i, 24p, 60p, etc.)? I'm not sure myself, actually it should be ok for the web, but if the DVDs on its Glotze run but it would have problems, right?
Ich hab noch ne question for me-DVI cable: Is that a yes for 2-5 euros is not so great, but where are the limits? For Saturn I have one for 50 euros seen (and a little less), the catch at Ebay at 4 euros. Are there features on the watch should be? It should be between Lcd Camera and running.
I thank you in advance for answers!
Fine day!
Antwort von tommyb:
No, this is s.sich no problem.
If you have all the rings fluorescent tubes as light source, then there will be a flicker of the lighting come and that's a huge limitation with an NTSC camera in PAL land.
DVI cable The transfer of a DVI signal is digital. This means that theoretically, a cable is not so extremely expensive (in comparison to VGA, because analog) to the 1 and 0 to transfer correctly.
However, the following problem: What if the cable is not shielded well enough or if the connections are not optimally processed? Then the following can happen:
1 is sent, is as 1 to 0 is off, comes in as 0 0 is off, comes to over 0.5
and in the case when the 0 than 0.5 arrives, the device must decide "Is it a 0 or a 1 was the limit?". In this case, it may therefore cause problems.
Ultimately you should visit your cable from the middle class purchase price, such as those of HAMA.