[14:56 Wed,15.April 2026 by Rob] |
Canon is bringing a whole range of exciting new developments to NAB 2026 that even surprised us. These include the new CN30x40 IAS, a modernized version of what is probably the most famous and expensive “wildlife cine zoom,” the CN20x50 IAS, along with numerous firmware updates for Cinema EOS cameras, a new night vision camera with a SPAD sensor (MS-510), and a new mid-range remote camera controller. Canon CN30x40 IAS Cine Servo 40-1200mmWith the CN30x40 IAS Cine Servo 40–1200mm J/R1, J/P1, Canon introduces a heavily modernized version of the CN20x50 IAS H E1/P1, which has achieved near “cult status” among wildlife filmmakers.
 Canon CN30x40 IAS Cine Servo 40-1200mm The CN20x50 zoom lens (often simply referred to as the “CN 50–1000”), developed in the 2010s by German cinematographer and wildlife filmmaker Ivo Nörenberg in collaboration with Canon, features a switchable 1.5x teleconverter. Despite its high price of currently just under €80,000, it became a very popular lens and has been widely used in high-end wildlife productions by BBC, Netflix, and others. The CN 50–1000 is available in both EF and PL mount versions. Fast forward to 2026: Canon now introduces the CN30x40 IAS Cine Servo 40–1200mm, which is also offered in two versions—this time with Canon RF and PL mounts. With a focal length range of 40–1200mm, overall coverage has been extended even further. The aperture remains roughly the same at T5.0 up to 560mm and T10.8 at 1200mm. Like the CN 50–1000, the new 40–1200 is designed as a Super 35mm lens, which, with the teleconverter activated, can also cover full-frame sensors.  Despite now offering a 30x zoom range, weight and size remain unchanged at 6.6 kg and 405.2 mm in length. In the RF version, the CN 40–1200 supports Canon Dual Pixel CMOS AF. It also features a 12-pin serial connection, as well as support for Cooke /i and ZEISS eXtended Data in the PL version. As with the CN 50–1000, a detachable Cine Servo Unit will also be available for the new CN 40–1200. The Canon CN30x40 IAS Cine Servo 40–1200mm is expected to be available from September 2026 at a price of ,999. Firmware Updates for C400, C80, C50, C70, R5CA new Auto Exposure Ramping Compensation feature will be exclusive to the Canon EOS C400. It will likely be particularly useful in combination with the newly introduced CN30x40. This feature compensates for exposure drop during zooming by adjusting ISO.  Canon EOS C400 The new Auto Exposure Ramping Compensation is expected to be available from summer this year for the following lenses: CN7x17 KAS S/E1, CN8x15 IAS S/E1, CN10x25 IAS S/E1, CN20x50 IAS H/E1, CN5x11 IAS T/R1, CN7x17 KAS T/R1, and CN30x40 IAS J/R1. For the C400, C80, and the new C50, Canon will also introduce USB-C camera control support this summer, allowing control via DJI gimbals for start/stop, iris, shutter speed, ISO (not gain), one-shot AF, and manual focus. This functionality has long been available for the Canon C70—newer Cinema EOS cameras are now catching up. A small detail worth mentioning: the horizontal and vertical level indicators in the on-screen display of the C400, C80, and C50 will now turn green when the camera is properly balanced. That’s it for Cinema EOS firmware updates. Expectations online were somewhat higher (e.g., regarding Open Gate: more codec options for the C400, Open Gate for the C80, and Open Gate 50p for the C50), but for now, this appears to be the extent of Canon’s updates in this area. Canon MS 510 CameraCanon will also premiere the successor to its MS-500 night vision camera at NAB—the new MS-510. Equipped with a SPAD sensor (1-inch Single-Photon Avalanche Diode), the camera achieves a minimum illumination of 0.0006 lux. Combined with improved near-infrared sensitivity, this marks a significant improvement over the predecessor’s 0.001 lux.  Canon MS510 Canon identifies wildlife observation and surveillance as the primary application areas for this specialized camera. Key features of the new Canon MS-510 include: - Broadcast-quality optics: Equipped with a B4 mount commonly used in broadcast, the MS-510 features an integrated optical magnification system compatible with Canon’s extensive lineup of 2/3-inch ultra-telephoto broadcast zoom lenses, enabling clear recognition over long distances. - Advanced image processing: Built-in haze compensation automatically reduces interference from fog and haze while adjusting contrast. Intelligent shadow control corrects highlights and shadows to maintain image quality in challenging lighting conditions. - Customizable image profiles: Users can create up to 20 individual image quality settings or use custom presets to prioritize either wide dynamic range or maximum noise reduction depending on the environment. The Canon MS-510 is expected to be available later this year at an estimated price of ,800. RC-IP300 Remote Camera ControllerAlso new at NAB, Canon introduces the RC-IP300 remote camera controller, designed to bridge the gap between the RC-IP100 and RC-IP1000.  Canon Remote Camera Controller RC-IP300 The RC-IP300 supports up to 200 cameras and incorporates many of the advanced features of the flagship RC-IP1000, but in a smaller, more portable form factor. It features a 3.5-inch touchscreen for live video monitoring of multiple cameras over IP, including touch autofocus control and intuitive subject selection for automatic tracking. It also enables seamless configuration of camera and system settings directly via the controller. Physical controls include dedicated dials and buttons for pan/tilt, focus, zoom, and iris, along with separate speed controls, 12 assignable buttons (including 3 hardware buttons), and 4 function buttons with four-way menu navigation. The RC-IP300 PTZ remote controller is currently scheduled for release in June 2026 at an estimated price of ,499.  more infos at bei www.canon.dedeutsche Version dieser Seite: Firmware Updates für C400, C80, C50, C70, R5C, ein Wildlife-Zoom für 80.000 Dollar, ua. |
 |
|
|