I must take with three microphones and transmit to the PC for recording.
So is there the possibility of three microphones in front of the PC-in to mix to 2 channel? For example, with a 0815-very-easy-to-analog mixer? Or an equivalent coupling to me until two signals to a mono does, which I then add only the third signal are then put on 2-channel?!
How could I solve the cost??
For practical tips, I am very grateful!
Antwort von Blackeagle123:
Hey,
what mics? XLR? Jack? Need phantom power?
From 3 mics need a mixer, no preference whether analog or digital. Are cheap products of Behringer. There you can then adjust the volume and put a microphone on the far right, while the other two are placed on the left. So you have two signals available s.end.
It would be better but as a USB mixer, which is synonymous of cheap Behringer. Since you have more tracks (and all available individually).
How much will you spend it?
Greetings!
Antwort von berlinrocker:
Hello Blackeagle123,
So I have two XLR Condenser kidneys, which are to be mixed on one channel. The third signal is of a radio link via latch. A cheap mixer gives me the phantom power I have synonymous. According to your description and what I have, would that be even possible? ... :-)
Antwort von Klappe:
Now you only the two condensates and the wireless mic receiver into the inputs of the mixers have cable, the two condenser means Panpot far left and the spark of the far right. Total output of the mixer into the PC line in plugged, pressure levels and mix between the two condenser in the relationship. Done.
Antwort von berlinrocker:
Yes, yes, I had to smile, I have not worked with already ne (gaaaaanze) while audio technology. I think I out postwar :-)
Have many thanks, sometimes the dough in colorful head NEN trifle slow ..
Antwort von Klappe:
I help every day. This is synonymous not beautiful. ;-)
