I am mediengestalter and already planning a Flashainmation.
I have of getting our Cutter videos where the sound does not exceeds - 5db. I also have seen the area by the spectrum analyzer 25 - 100k is completely gone ....
Should not the sound control are close to 0db and should not be there full range EQ or in the High and depth of field to be slightly reduced.
find attached a screenshot of the spectrum analyzer
Antwort von Soulfly:
Quote:
Should not the sound control are close to 0db and should not be there full range EQ or in the High and depth of field to be slightly reduced.
That depends on the reference level. If the cutter has gepegelt professionally, he has gepegelt to -9 dBFS (Full Scale). This corresponds to 6 dBU or 0 dB. -9 dBFS which is called the full scale with a quasi-Überpegel Reserve, synonymous headroom. Therefore you must specify your dB specification. As for the Freauenzgang which depends on the piece of music about the atmosphere. But no frequencies in the signal make this area very underpowered, no preference because what comes. Was there perhaps a growl which had to lower the cutter lower in the sound?
