Logo Logo
/// 
CANON HF100 : Wie mit Fernbedienung schwenken?

CANON HF100: As with remote control pan?



Frage von taller:
März 2009

Hello,

I would like to see the CANON HF100 growth and thereby remotely control zoom
synonymous and can swing a bit, which required Tripod is still optional.

Since the beginning of s.Topmaterial I have to want to play the price zuächst
once a less important role. What type of material needed for my project?

About the supplied remote control included HF100 WL-D88, I have so far
little to find out what is taxable?
As for the tripod I had s.das example 1820g but with very slight Eschenbach
Tripod floor stand designed for 98 ¬ which is quite cheap ..

Greetings!
taller



Antwort von domain:

A remote panning is a chapter for itself and on a remote camera is certainly not feasible, but the zooming.



Antwort von taller:

@ domain
Is a remote control to pan with the proposed Tripod compatible?








Antwort von domain:

No Tripod has remote pan with something to do, because it depends on the head to the remote and swivel base feinstmechanischer to be safe and it costs more than your camera and your prospective Tripod together.



Antwort von taller:

@ domain
I wanted to make sure that the tripod to the remote synonymous swivel head
fits. Is there no easy way-we-say around the 500 ¬? What could
you specifically recommend? Under what key words to find something?
Thanks for the replies so far!



Antwort von B.DeKid:

Gude Chef

So your first concern is with remote control and then still not an everyday Taxable head ;-)

Well that is equal to times from our own experience, the whole mini Ferbedienungen for / of the cams are designed for the Popo!
Cable versions are better.
Wireless Solutions (NOT IR) for some things are naturally good.

Funk is but we say "too expensive".

Well no preference ....

Here you'll find a "Remote Head" in your price range (below anything you'll see where prices go next and what is really still cheap)
http://www.bargain-camera.com/store/home.php?cat=291

And here you'll find Lanc controller, LANC will probably have the Cam.
http://www.bargain-camera.com/store/home.php?cat=283

Take a Manfrotto Tripod 055xProb good.

MfG
B. DeKid



Antwort von domain:

B. Hey Kid, this is a super link!
A kabelferngesteuerter Neiger with up to + -90 degrees horizontally and + - 15 degrees vertically and variable speed for $ 129th - and only 1 kg weight, hard to believe. Only question is how the anfährt and stops. If this happened suddenly, one can forget the thing.
http://www.bargain-camera.com/store/product.php?productid=16318&cat=291&page=1



Antwort von taller:

@ B. DeKid
Hi boss, you have fully grasped's ;-) and then pressiert's still synonymous,
because I'm in 3 1 / 2 weeks for Russia booked ..

Related Links:
Hair Exactly what I had imagined! Can I bargain with risk
(by Visa) to order the stuff and has experience in at least 3 weeks
from the States there? If there were among those to a smooth completion to guarantee
anything else to consider?

Greetings!
taller

PS: Great, informative page, which it did here with a very helpful and
capable people who go straight to the point



Antwort von taller:

Addendum:
The HF100 does not have a LANC (2.5-millimeter jack connection, which
Control commands of next transfer away). Therefore can still hire someone
something from his experience on the quality of the original infrared remote control
say this: Does the interior part of the emergency, or should
one because of the weaknesses (what?) an alternative to remote-controlled zoom
realize what is actually feasible?

Manfrotto 055xProb: Exact; by weight rather stable midfield to stop warranty
and still be transportable over time ..



Antwort von B.DeKid:

Thank you, but all thanks should be directed to rptelevision

Here he writes as nice to the product.

http://forum.slashcam.de/viewtopic.php?p=282507#282507

You find the synonymous on Ebay under the same name.

I think the small head is reminiscent of the look which the taxable headlight head.

But the "games" - for the money, bought. I think times.

..................

The LANC with the individual Member, I wanted to synonymous I saw in the table, sorry.

(How can you sollche Cams denn überhaupt control - only via IR remote control?)

MfG
B. DeKid

PS: It could indeed synonymous starting and stopping wegschneiden.Hauptsache but he runs the line between quiet, right?



Antwort von Modellbahner:

Remote control HF100. my solution.




Antwort von Rolf Hankel:

"taller" wrote:
Addendum:
The HF100 does not have a LANC (2.5-millimeter jack connection, which
Control commands of next transfer away). Therefore can still hire someone
something from his experience on the quality of the original infrared remote control
say this: Does the interior part of the emergency, or should
one because of the weaknesses (what?) an alternative to remote-controlled zoom
realize what is actually feasible?

Manfrotto 055xProb: Exact; by weight rather stable midfield to stop warranty
and still be transportable over time ..


Hello

So give it a whirl with a light conductor cable (there are in the electronic markets)
I have my HV30 for a holder for the Frnbedienung, which I am referring to the clip can Stativarm and a holder for the Cam. One need only observe that the sensor of the Lichtl. cable to the receiver of the HV30 and it is well shielded against Steulicht, then does the whole synonymous with sunlight.
Be the same for my HF100 made because the beneficiary is, however, the display s.Rand

Gruss Rolf ...








Antwort von Rolf Hankel:

"Rolf Hankel" wrote:
"taller" wrote:
Addendum:
The HF100 does not have a LANC (2.5-millimeter jack connection, which
Control commands of next transfer away). Therefore can still hire someone
something from his experience on the quality of the original infrared remote control
say this: Does the interior part of the emergency, or should
one because of the weaknesses (what?) an alternative to remote-controlled zoom
realize what is actually feasible?

Manfrotto 055xProb: Exact; by weight rather stable midfield to stop warranty
and still be transportable over time ..


Hello

So give it a whirl with a light conductor cable (there are in the electronic markets)
I have my HV30 for a holder for the Frnbedienung, which I am referring to the clip can Stativarm and a holder for the Cam. One need only observe that the sensor of the Lichtl. cable to the receiver of the HV30 and it is well shielded against Steulicht, then does the whole synonymous with sunlight.
Be the same for my HF100 made because the beneficiary is, however, the display s.Rand

Gruss Rolf ...


Have just seen the above instructions, as I have made it synonymous

Gruss Rolf ...



Antwort von taller:

Ok, with this reliable information in the luggage, I feel ready
and can be synonymous in Germany to buy everything so I'm safe .. Page

Among the homemade solutions for the remote control:
Respect!
If the remote control is not decent work, then I will do exactly the same way!

Again THANK YOU!

Greetings!
taller



Antwort von marwie:

"domain" wrote:
B. Hey Kid, this is a super link!
A kabelferngesteuerter Neiger with up to + -90 degrees horizontally and + - 15 degrees vertically and variable speed for $ 129th - and only 1 kg weight, hard to believe. Only question is how the anfährt and stops. If this happened suddenly, one can forget the thing.
http://www.bargain-camera.com/store/product.php?productid=16318&cat=291&page=1

I know the head, run smoothly and stop so that you can not, unfortunately, is also the speed for Pan and Tilt differently. In addition, the head is not really well built, but for the price it is ok.



Antwort von domain:

Thanks for the information regarding the start and stop behavior, I've almost thought of, but unlike with the pictures at the beginning of the swing and s.Ende clip is barely holding.
I already have a whole box full with unnecessary purchases, which I maybe 3-4 times total used.
The start and stop behavior of this head would be with NTC resistors in combination with a large capacitor is likely to change slightly later, but what cares.
Long pans do not like me more, is far too cumbersome in the production and extremely bored while watching.




Antworten zu ähnlichen Fragen:
remote control - app - touch fokus
Field Monitor mit Camera Control für Canon R5C
Sachtler ACE L - Pan/Drag-Problem
Edelkrone HeadPlus -- überarbeitetes Pan&Tilt Modul
Axibo Pan/Tilt/Slide: Der erste intelligente AI Kamera-Slider
Adobes Premiere Rush bekommt Auto Reframe und Pan&Zoom Effekt
ATEM Mini Extreme - keine Camera-Control
Motion Control Baukasten für Product Shots
colorsynth-plugin-and-codex-keys-control-surface
Teleprompter mit Autocue und Voice Control Deutsch
Syrp Genie One: Motion Control für Kamerafahrten oder -schwenks
Aktualisierter edelkrone Controller v2 - jetzt auch kabelbasierte Motion Control
CDA-TEK 3C Cinema Camera Control v1.4 unterstützt Tilta Nucleus Nano
Teradek TOF.1: Infrarot-Entfernungsmesser für das RT Wireless Lens Control Kit
Teradek: Zubehör für RED Kameras und neues Lens Control System // IBC 2018
Remote Arbeiten
RED Control Pro App - erweiterte Bedienung von V-RAPTOR und KOMODO für 500 Dollar
Atomos: Neuer Shinobi 7 HDR Monitor mit 2200 Nits, Touchscreen Camera Control, SDI uvm.
Video: DOP Ben Davis über Motion Control, (SET)Licht, Film vs Digital u.a. in Dr. Strange (MARVEL)
Professionelle Remote APP 8,99€
Remote bedienbare Kamera?
Remote Head für Jib
Nikon MC-N10 Remote Grip
Ronin-M Remote-Probleme - FIX
Remote Voiceover Recording Software - Empfehlungen?
Fujifilm Camera Remote 4.0.0 for Android Released

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos