Frage von flo007:
Servus Leute! Today had an idea that maybe someone is interested:
The model range for Model Helicopter gibts so-called "Gyrokreisel" that hold the car model by 2 servos in the horizontal. Picture:
http://www.modellhobby-shop.de/modellhobby/index.php?show=details&product_id=2121&ktg=93 If one is building a kind of steady cam, cam mounted on a plate and this plate by Gyrokreisel and then hang two servos that Cam is brought by the roundabout into the car always horizontal (Horizontal), one gets the shake-Picture.
1 servo takes care of the left / right balance, power, the second around the front / back balance. Anything in between is (eg by tilting the front right, is balanced by two servos auto)
Servos & Gyrokreisel gibts Mr. E. Bay. For this you need a battery holder, switch, but no remote control.
Was it just an idea that should be built and tested and times. What do you this? Best regards, your flo
Antwort von mint400:
Good idea!
But you not the first of the draufkommt on sowas:
http://www.gyromatic.net/EDIT:
Hier gibts sogar nen Heli-Flug der with zwei Stabilisatoren ausgeglichen wurde zu sehen:
http://www.ken-lab.com/html/video_clip.html It would be interesting if one can achieve good results with Eigenbau solutions ...
Antwort von oliver II:
Servus Flo!
Class idea!
But I wonder what the inertia sets up such a system s.den day. By that I mean, how fast the system responds to changes.
I can not imagine rather that it is better than a well-balanced camera at a suitable mechanical system.
If you (or someone else) has tried once, it would naturally be very interesting to read about it here.
Antwort von flo007:
Helau! I'll build a crane, and one grad Steadycam, but I can take care of drum later.
If you are
looking for the way his
self-built Steadycam a suitable ball joint, for example, found in H. ORNBACH a small vise made of aluminum, which can be rotated in all directions. Saw him once disassembled and lubricated much Gleitpaste around the ball: If everything goes very low friction. The vice does not cost the earth, around 30 euros (no less).
If, moreover the advantage that you can screw it onto a wooden board (Table o. similar) and the cam is on auszentriert anyway. What else is possible: one can see the ball and thus determine the Cam in every position. I care about the pictures of my views Eigenbaus.
The Picture of vice: zum Bild Picture: The part with the Schraubbacken is not needed. This leaves the lower part of which is bolted under the steady bracket (with weights).
Antwort von mint400:
Well now, if they even bother to give their creator thread in off topic discussions Berreich guide to ... ;-)
Antwort von flo007:
[quote = "mint400"] Good idea!
But you not the first of the draufkommt on sowas:
Antwort von steveb:
only if you synonymous with "Terminator Arnie" the voice of what ever ... "äktschenfuim" ... Fassel :-)
Antwort von flo007:
"A SACHADUATN FOR THE WHOLE FAMÜLÜÄ"
