Infoseite // Camera move vertically



Frage von cinilux:


Hello,

I want to do the following. A camera on a dolly is to win and move along the tracks at the same time sHöhe. What opportunities are there for? Now, without any crane system.

Think of the tips in advance!

Space


Antwort von B.DeKid:

Without a crane or jib .... in fact only increase of Hand or a rail with sleds.

Quasi only crane

MfG
B. DeKid

Space


Antwort von cinilux:

Rail with sled? There are no tripods which are adjustable in height? The camera will be only one meter higher. What do you mean with raising your hand? With his hand sowieseo, but it should remain s.Dolly tripod and fixed.

Space


Antwort von crazy-spy:

There are crank tripod, especially for heavy lights. Cost but a lot of synonymous and one smooth movement with such solutions can you forget it.
Jib-arm is the most optimal and technically best for your applications would.

Space


Antwort von nahmo:

Surely there Tripods with hydraulic function. With a little practice to smooth movements are still in it, right?

nahmo

Space


Antwort von krokymovie:

1. dolly and mini krahn with a tripod, if it's supposed to be homogeneous.
2. with steadicam vest.

gruß

Space


Antwort von kledano:

No matter what is being answered, da gibts really only two possibilities:
1) You you rent a dolly with lifting function, but since you will arm as an individual. So not a good proposal.
2) You you hire a Jip-arm, which you can mount on a tripod with a bowl 100s. This is much cheaper, gibts schon s.ca. 40 euro / day. Has only one drawback: the camera does not go vertical but in a light arc upward.

Good luck

Space


Antwort von cinilux:

Thanks! Now I have to look where a lighter, smaller Yip is having his arm.

Space


Antwort von chrisl:

You need a pump, not a jib!

Space



Space


Antwort von kledano:

Where do you come from? Maybe I can give you an address recommendation.

Space


Antwort von cinilux:

'm Currently in the Sauerland. The action must take place but not here. I thought so s.Berlin, where you can rent everything possible on site and pick up.

What is the one pump?

Space


Antwort von crazy-spy:

"cinilux" wrote: 'm Currently in the Sauerland. The action must take place but not here. I thought so s.Berlin, where you can rent everything possible on site and pick up.

What is the one pump?


Ne pump is a pump stand, as it is used in studio shoots.
Disadvantage: Very solid, heavy, bulky, so nothing for lightweight construction.

A dolly with hydraulic lifting function is synonymous not easier, it does nothing. However, these two options are very expensive.

Depending on what you have for ne Camera and the height would be limited by the price, performance and portability / weight, a compact dolly s.Besten on PVC pipes with small jib nem own. This depends halt of starting your application, what is there s.besten notes - and especially what you have for experience, where you turn what you have for nen budget, etc. .. It should be synonymous with a dolly, the Ground level of the substrate, which also notes that according to his needs - (otherwise, this must be produced erstmal, plates, wedges, etc.).

Space


Antwort von kledano:

Depending on what kind of project it is, can you possibly the technique at my cost to borrow. Am in Rhine-Nackar home area.

Space


Antwort von cinilux:

"kledano" wrote: Depending on what kind of project it is, can you possibly the technique at my cost to borrow. Am in Rhine-Nackar home area.

Hi,

The plan looks like this ... Turning in a studio against a green screen. approximately 3 to 4 m with the dolly drive towards green screen. The camera follows a person and increases to slow. A fan takes a little wind in the scene. Lighting needs one, resemble either early or late sunlight. So a couple of lights for the green wall and 2 to 3 (;?). for the person A camera needs to here, may start with 50 fps in 720p. Recording is via SDI to a PC in 4:2:2. All this - including green screen and space - I would have to scrape for 2 days.

Greeting
Fred

Space


Antwort von kledano:

What kind of project is it? Commercial? Student film? Hobby?
Basically, you can all of us have for little money: Camera (; (EX-3), Dolly, Jiparm and Greenboxhintergrund; 3x4 meters), light and other accessories. International Protective Coatings. Kommts a little money on the project on.

But as I say we are in the Rhein-Neckar (space, Mannheim / Ludwigshafen, Germany). You'd have to get the space you own, maybe you can film commission Rhein-Neckar help here: 0621-0621 / 293 - 9264

Space


Antwort von cinilux:

Thanks for the tip!

The Project is set to private. Is said to be a commercial, but for their own purposes. So I must implement with their own resources.

Space


Antwort von cinilux:

"kledano" wrote: What kind of project is it? Commercial? Student film? Hobby?
Basically, you can all of us have for little money: Camera (; (EX-3), Dolly, Jiparm and Greenboxhintergrund; 3x4 meters), light and other accessories. International Protective Coatings. Kommts a little money on the project on.

But as I say we are in the Rhein-Neckar (space, Mannheim / Ludwigshafen, Germany). You'd have to get the space you own, maybe you can film commission Rhein-Neckar help here: 0621-0621 / 293 - 9264


Where can I go to because of the rental? ;)

Space


Antwort von kledano:

Where can I go to because of the rental? :) [/ quote]

Send me an email @ s.news plonsker.de. I write you back and then send my phone number. with.

Space



Space


Antwort von carstenkurz:

Cheap rents cranes and dollies in Berlin gibts synonymous with Indycine. However, Berlin is more of a hot pavement, and in this respect, the availability of rental units so favorable schonmal Desired to be a problem.

A real crane for the task here is my opinion anyway too big. Comes a little bit on the circumstances, whether sowas then unnecessarily creates trouble. A small jib would be better to build up and before all, and much faster to use. The slight movement of a circular segment Jibs expected here when the camera follows the object to be no problem - as the camera pans to the top of the bottom and at the same time moves forward, it is related to the object before an incline instead of a circular segment, and a feet to the usual stands before you will stop at the quarter-circle, so the camera can not move back, per se.

- Carsten

Space


Antwort von cinilux:

@ carstenkurz

Hi! Thanks for your opinion! Yes, the store I know! Synonymous've already looked at the range on the homepage. Unfortunately, there lacks a jib arm. Only cranes ...

Space


Antwort von carstenkurz:

For 1m height you can you the jib arm from a few battens even screw together, at least if you have a reasonably sturdy tripod ;-)

True, IF you get a crane in Indycine, which is still cheaper ;-)

Yes you ask me, whether the ABA can build up less synonymous.

- Carsten

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash