Infoseite // Cameras can be synchronized via genlock not



Frage von JoergCologne:


Hi
I start with my first-time issue here and am looking forward to your (many) answers ;-))

The following hardware, all very similar and conventionally:

1 Component mixer Grass Valley CV110
1 Clock Black Burst
1 DVD Pioneer DVD-V7300D (runs perfectly by genlock on the mixer)
1 Panasonic F50A (which there's hardly under this name and is similar to the F250A or F200A or how to say - she runs with studio adapter DIRECT s.Monitor perfectly over Component, s.Mischer Genlock via the "Image Line the bottom and moved Picture of the running.
1 JVC KY-F30 GVG RGB-to-component converter and Genlock - same error

Did any of you a tip, where it could hang?

Thanks and greetings Jörg

Space


Antwort von Markus:

Hello Jörg,

I once asked a good friend, who is familiar with this technique. Here is his answer came (via email):

"Christian" wrote: Hmm, so on the fast, I'd say that he had the cameras not been set correctly, ie the phase of the sync signal not true. Normally, cameras with Genlockeingang have different controllers for the LDK for example, has three: H phase, SC phase and a controller with the name "Coarse". Think that he should try it.

However, I have the up to now not been made synonymous, and therefore can not (yet) be any more detailed tips. I understand that you need to accurately adjust the phase actually an oscilloscope, but with a little flair to it as synonymous to manage it.

Since I am not logged in the forum so you can even write to him once, maybe it's helping so next. Would be glad if I can help someone once synonymous. - Thank You da s.mich thought! * laughs * I will follow the theme of time, maybe I find something a synonymous nor it!

PS: Christian, you can not synonymous that you enroll you to write something about this. Simply click on the Answers button. ;-)

Space


Antwort von mkrawietz:

Well, that's times a tip, I'll try out direct foot ;-))

DnaK and I think many of you up to date

Jörg

Space


Antwort von JoergCologne:

Alsooooo

Changing the phase of H. fact something happened, but the change of SC.Phase and / or Coarse changes apparently nothing.

The image line is still upwards, and put the Picture "runs through"

hmmmmm

Regards
Jörg

Space


Antwort von Markus:

You've got the same error on two different cameras, while the other components remain the same. The cameras alone directly s.Monitor deliver a flawless picture.

How can you check that is causing the error as the clock?

Space


Antwort von JoergCologne:

"Mark" wrote: You've got the same error on two different cameras, while the other components remain the same. The cameras alone directly s.Monitor deliver a flawless picture.

How can you check that is causing the error as the clock?


The Clock DVD Players and PC sync clean.

The Camera s.Monitor (composite or RGB) or on the projector (component) will provide a clean picture.

I have just phoned Panasonic and times of the technicians (extremely friendly and helpful!) Said I should hang the Cam again s.den monitor via composite and see me, whether the synonymous Cam Cam is really a PAL ... ..

And lo and behold: it is an NTSC-Cam and the mixer can ONLY Pal.

:-( (

clear that the Cam with the synchronization is not clear at 60HZ.

Now I have a real problem .....
s.Donnerstag I have an event and I now probably have to borrow nen Kamerazug. My merit is that then :-( (

I thank you and your friend, but for the Unterstätzung.
Maybe I can help you, so synonymous times ;-)

Jörg

Space


Antwort von Markus:

"Joerg Cologne" wrote: Now I have a real problem .....
s.Donnerstag I have an event and I now probably have to borrow nen Kamerazug. My merit is that then :-( (

You have all the equipment you bought, I hope not just because of this one event?

"Joerg Cologne" wrote: Maybe I can help you, so synonymous times ;-)
Or / And vice versa: I work with a small team of cameramen, sound engineers and directors (together with scene editing - soon again - Intercom) to allow live productions. Perhaps you are renting in the future to us instead of just the technology? We have everything what you need, not only for OB trucks around it. ;-)

Space


Antwort von JoergCologne:

"Mark" wrote: "Joerg Cologne" wrote: Now I have a real problem .....
s.Donnerstag I have an event and I now probably have to borrow nen Kamerazug. My merit is that then :-( (

You have all the equipment you bought, I hope not just because of this one event?

Not only because of this .... A for that I might have given me something ....
But until the next I had the SonyDXC VA-325A there, I bought ;-)

"Joerg Cologne" wrote: Maybe I can help you, so synonymous times ;-)
Or / And vice versa: I work with a small team of cameramen, sound engineers and directors (together with scene editing - soon again - Intercom) to allow live productions. Perhaps you are renting in the future to us instead of just the technology? We have everything what you need, not only for OB trucks around it. ;-)


Send me mal ne mail address for further contact ;-)

Regards
Jörg

Space


Antwort von Markus:

Is everything in the profile. ;-)

Space



Space


Antwort von JoergCologne:

"Joerg Cologne" wrote: Or / And vice versa: I work with a small team of cameramen, sound engineers and directors (together with scene editing - soon again - Intercom) to allow live productions. Perhaps you are renting in the future to us instead of just the technology? We have everything what you need, not only for OB trucks around it. ;-)

I can rent inexpensively providing Kamerazug, synonymous if the BTS was beastly hard to have everything worked out.

PS what have you got for an old intercom and what will make sure you at it if your new intercom running :-))

Regards
Jörg

Space


Antwort von mkrawietz:

Hello Jörg,

now I'm curious views: What BTS / LDK You had borrowed (which model, etc.)?

Gruß, Christian

Space


Antwort von JoergCologne:

"Anonymous" wrote: Hello Jörg,

now I'm curious views: What BTS / LDK You had borrowed (which model, etc.)?

Gruß, Christian


Uppps

if I'm honest, I did not notice it.
I know only this much: she was sauschwer, and is quite large this year at Thomson from the service .... (the reference was) talking.

Regards
Jörg

Space


Antwort von Markus:

"Joerg Cologne" wrote: [bts / ldk] ... she was sauschwer, very big ...
They all are. ;-)

"Joerg Cologne" wrote: PS what have you got for an old intercom and what will make sure you at it if your new intercom running :-))
The old intercom consists of 4 PMR radios and PC headsets in the closed construction. The radios are used in the future, while the up and dismantling phase continues, the headsets are probably ready for the garbage.

Space


Antwort von JoergCologne:

"Mark" wrote: "Joerg Cologne" wrote: [bts / ldk] ... she was sauschwer, very big ...
They all are. ;-).


I have already noticed ;-)
But the cable guide via Triax was something new in Comparison to x-pin "multicore".

"Mark" wrote:
"Joerg Cologne" wrote: PS what have you got for an old intercom and what will make sure you at it if your new intercom running :-))
The old intercom consists of 4 PMR radios and PC headsets in the closed construction. The radios are used in the future, while the up and dismantling phase continues, the headsets are probably ready for the garbage.


ahhh that was then more as a "with all due respect - Toys variant", -))

Regards
Jörg

Space


Antwort von Markus:

"Joerg Cologne" wrote: ahhh that was then more as a "with all due respect - Toys variant", -))
Even without your permission if it were a toy version. One must start with something so times. ;-)

Space


Antwort von JoergCologne:

"Mark" wrote: "Joerg Cologne" wrote: ahhh that was then more as a "with all due respect - Toys variant", -))
Even without your permission if it were a toy version. One must start with something so times. ;-)


Da haste recht, however :-))
I've erstmal nem Composite Effect synonymous with "switch started", but I am fast enough (4 weeks) switched to a real component mixer. Guuuuut - the first Kamerazug was unfortunately a flop. So he does such a flawless, is not as difficult as the LDK, unfortunately, only halt ne NTSC box. Yes BVS Masterkey5 onden I have unnecessarily increased synonymous, because the mixer actually already completely covers the functions, but now I sell him halt again. I think these experiences are easy to stop ;-))

Regards
Jörg

Space


Antwort von mkrawietz:

Hi Jörg,

I shall take s.das was ne LDK91 or 93? Who receives a "totally wacky, angular design" have to "television circles," the reason a lot of nicknames are synonymous, but performanceextrem praised for their color! (surely a matter of taste)
I do not want to annoy now, what was it for ne Optics tuned 1 / 2 or 2 / 3 inches?
Triax? Genial! No wonder then that the camera was so heavy ...

How have you been satisfied with the sensitivity to light? Useful?

Greetings from the prying Christian

Space


Antwort von JoergCologne:

"Anonymous" wrote: Hi Jörg,

I shall take s.das was ne LDK91 or 93? Who receives a "totally wacky, angular design" have to "television circles," the reason a lot of nicknames are synonymous, but performanceextrem praised for their color! (surely a matter of taste)
I do not want to annoy now, what was it for ne Optics tuned 1 / 2 or 2 / 3 inches?
Triax? Genial! No wonder then that the camera was so heavy ...

How have you been satisfied with the sensitivity to light? Useful?

Greetings from the prying Christian


Hi

the lighting conditions were extremely sch .... Rottig. Stage in a shooting gallery with very much ambient light as the sun has popped like crazy and can not read the darkened hall. The image on the preview screen was still top. only a pity that the projector with 4200 ANSI and a foregone ... eidenen Rückprofolie for the lighting conditions to trillions Ansi was too dark. The same projector I have used on several occasions for Frontpro ner with regular canvas, but the film and the circumstances were just schrottig.

I just rausgekramt the delivery times.
It was ne LDK 10p/02 with Fujinon A15x8 BEVM-28 with the appropriate base station and OCP.

Regards
Jörg

Space



Space


Antwort von mkrawietz:

Hi Jörg,

Thanks for the information, now I'm happy!

Oh hang on ... we should ask what the Kamerazug has cost so ...?
(I'm totally thrilled that time someone borrows ne LDK, I do not know where to borrow a kann.Alle dealer I know, mainly to give Sony's!

Regards, Christian

Space


Antwort von JoergCologne:

"Anonymous" wrote: Hi Jörg,

Thanks for the information, now I'm happy!

Oh hang on ... we should ask what the Kamerazug has cost so ...?
(I'm totally thrilled that time someone borrows ne LDK, I do not know where to borrow a kann.Alle dealer I know, mainly to give Sony's!

Regards, Christian


This was not offfizieller lender, so I can give you because of any "tip". But I know that the end of the year, some LDK Retire "," stop going there because the "out of service". If you are interested, I can perhaps arrange something. Email me your views in this case, simply mail address via PM.

Regards
Jörg

Space


Antwort von Markus:

"Joerg Cologne" wrote: Email me your views in this case, simply mail address via PM.
There are no PMs and PNs. Two alternatives: Either here postet someone his email address (s.besten so that they can not recognize spam robot), or someone adds their email address in the profile, so you can see them there (of course, synonymous setting down next "Always show my e-mail address always on"). ;-)

Learn More:
A specific user asking them directly?

Space


Antwort von JoergCologne:

"Mark" wrote: "Joerg Cologne" wrote: Email me your views in this case, simply mail address via PM.
There are no PMs and PNs. Two alternatives: Either here postet someone his email address (s.besten so that they can not recognize spam robot), or someone adds their email address in the profile, so you can see them there (of course, synonymous setting down next "Always show my e-mail address always on"). ;-)

Learn More:
A specific user asking them directly?


Opps, I'm just of "classical Forums" expected ;-)

Regards
Jörg

Space


Antwort von Christian3:

Hello,

@ Mark: Thanks for the information!
@ Joe: So, I once added to my profile "," now it could go.
Greeting s.alle, Christian

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash