Frage von HonkyBob:
Hello HF20 and I've ne nen Tripod Cullmann got very tight. Only when I'm filming during the ride, the picture is blurred and trembling slightly. 've synonymous times without tripod and filmed the camera mounted on a thick aluminum plate on the dashboard, then stick to zoom out completely and put the auto stabilizer on easy settings or both. I hope I'm just the wrong settings. Is there ne possibility that you or I can show to tremble at the reinstellen youtube and link here, or is it not allowed?
AM
Antwort von canovision:
As is probably the vibrations of the vehicle transferred to the cam, an experimental film out of the hand to (; passenger!) And if you film by plate glass,'s possible that the
Camera on the disc's it sharp scharfstellt.Gibt s.der Cam the possibility of manual?
Antwort von partylogger:
I have the synonymous car Cullmann tripod and with my Panasonic TM300 the same Probs. If the road is rough and vibrate when the car drives over them to come, the tripod is not in a position to feather these vibrations. The stabilizer of the camera is as synonymous s.seinen limits, so the picture is slightly blurred because the Picture shakes quickly and in small amplitudes.
I have not yet synonymous right solution. I want my time a Moosgummiplatte cope cut and fasten between Camera and plate. Maybe that brings what.
Antwort von HonkyBob:
Ne solution Yes, I know I'm synonymous ncht I could do with my Panasonic NV-GS better movies during the ride just is unfortunately broken.
'm going to try today, if the shaking during the shoot out of his hand during the ride is the same.
Perhaps one can completely turn off the auto focus and stabilizer've only found nothing so I guess that what has to do with the scharfstellung too. Because the quiver is synonymous when you are driving on a smooth road.
AM
Antwort von HonkyBob:
Perhaps it is s.einfachsten if anyone knows what the optimal camera settings when you shoot during the ride out of the car are?
To maladjusted s.auszuschließen of the beginning? Hab for instance, the recording quality is set to full HD.
AM
Antwort von deti:
Should not be underestimated in such vertical vibration, the effects of rolling shutter CMOS sensor. The picture then has often compressed or pulled apart, creating a small wobbler is a strikingly large image disturbance. Moreover, the difference for the above-mentioned SD camera, the one hand, a CCD sensor, and other records with much lower resolution, making the camera shake is also less noticeable.
Basically the best possible mechanical decoupling should therefore be made and, if necessary with a CCD camera will be filmed.
Deti
