Frage von bonnp:
it is to cry!
I have before me about the canon 2wochen-HG10 purchased.
the plate, I now fully relaxed, so I am an absolute number of films. :)
but this problem proved to me then when I tried, the material on my macbook to get to it with iMovie to edit:
as you surely know, the thing has no firewire output. when I called canon, I should use another. s.zu then I am a wholesaler and then told me a really very competent man, that it is a codec problem was, I just connect the USB cable needs. he said of the codec (h263) is unfortunately not on the cd, as he assured me. so far I can only usbkabel with the photos rüberziehen. mac for all the existing software on the cds I've already installed. aufm desktop it shows me the camera as a disk, the files but I can not use it.
please help me next! I'm s.verzweifeln, I 930euro paid for the ding, the film absolutely convinced, but I can with the material just does not start.
gruß,
bonnp.
Antwort von Jan:
Da gibts synonymous not much to talk about.
Canon has no Mac SW dazugepackt.
To play via the USB cable must be taken, or shall we say better rüberziehen. Now we have only one, the Canon SW MPEG 4 H.264 material read. With the Mac I have not tried it, it would be possible to move the I import the Canon MTS files are not accepted - AVCHD is unfortunately not the same as AVCHD.
The right software you need to find the Winbugs community already has plenty of opportunities Pinnacle, Magix and Sonyetc.
But pull the files first on the Mac hard drive - that is, at least, the Canon Camera must be recognized as a device.
VG
Jan
Antwort von bonnp:
thanks for the quick reply.
I am like you can see a total rookie in this forum and elsewhere in the synonymous cinematic territory. but every beginning is difficult, but still better than never starting. I did not understand what you wanted to teach me. So a few questions:
SW means software?
and yes my mac recognizes the camera, but only as a hard disk.
and what we got with the codecs aufsich? What do I need finally to bring it with iMovie to edit like any other footage of synonymous traditional miniDV cameras zb?
or did you want me to say that there is no possibility to time, there with a Mac to do?
thank you again,
regards,
bonnp.
Antwort von Bernd E.:
... what I ultimately need to make it with iMovie to edit like any other footage of synonymous traditional miniDV cameras zb? Already a pity that Canon increasingly become Mac users so obviously ignored. According to the manufacturer, but this converts http://mac1080hd.com/?q=en/node/4 cheap software HG10 of the material so that it is of iMovie 8 can be processed. I've tried all's not because I have no HG10 (s wishes).
Gruß Bernd E.
Antwort von PowerMac:
Can MPEG Streamclip to convert files perhaps?
Antwort von bonnp:
thank you, thank you, thank you!
the program will be times I will try.
Antwort von bonnp:
ahoy, ahoy.
if ichs've understood, is iMovie08 in the location, the impressive play. I have another question:
there are several folders and in each of these folders is a list of files, which are chronologically numbered. therefore I do not know exactly which of whom I now for the processing of the videos do. where is hidden because of the important material?
thank you in advance.
gruß,
b.
Antwort von bonnp:
ahoy, ahoy.
if ichs've understood, is iMovie08 in the location, the impressive play. I have another question:
there are several folders and in each of these folders is a list of files, which are chronologically numbered. therefore I do not know exactly which of whom I now for the processing of the videos do. where is hidden because of the important material?
thank you in advance.
gruß,
b.
Antwort von Jan:
Video Active has in the last issue reported that it was there I think to Intel or not IntelMacs - have you read through again.
I had no time yet, the HG 10 with my Mac at work to connect. With Mac and Sony AVCHD models so far but I had no stress.
VG
Jan
Antwort von tinkoul:
actually yes you should be the material directly through iMovie'08 can import (diret of camera, not only of Macintosh HD), which then files in the Apple Intermediate Codec converts to enable them synonymous of Final Cut for example, can be used. Intel Mac is a prerequisite (Macbook is one). Precisely for this reason I have chosen instead of the HV20, the HG10 decided yet because I have a G5.
Antwort von WoWu:
... However, it is synonymous to say that the Canon format (once again) does not conform with the standard and is therefore well may happen that equitable standard decoder can not read it.
H.264 AVC says the standard aspect ratio of pixels for the 2 HD format 1920 and 1280 are clear: (Header Setting 1) 1:1 pixel format. In order to eliminate any confusion, they still synonymous in the standard ( "squared") into it. (S.244, table, 2.Zeile).
A format of H.264 at 1440x1080 comes nowhere before and certainly no rectangular pixels.
Anyone who buys cameras should be in future, perhaps, in order afterwards no surprises to be experienced.
Antwort von wolfgang:
... However, it is synonymous to say that the Canon format (once again) does not conform with the standard and is therefore well may happen that equitable standard decoder can not read it.
H.264 AVC says the standard aspect ratio of pixels for the 2 HD format 1920 and 1280 are clear: (Header Setting 1) 1:1 pixel format. In order to eliminate any confusion, they still synonymous in the standard ( "squared") into it. (S.244, table, 2.Zeile).
A format of H.264 at 1440x1080 comes nowhere before and certainly no rectangular pixels.
Anyone who buys cameras should be in future, perhaps, in order afterwards no surprises to be experienced. Then, however, all previous AVCHD camcorder, in
1440x1080 and thus non-squared pixel record, not "standard compliant". This feature is shared between Sonywith Panasonic with Canon equipment.
And the editing programs - where to cut - and the players are perfectly designed drauf. Even the authoring tools, 1440x1080 for Blu Ray Authoring in practice.
It's almost to tears: the standard deals worldwide apparently no Sau ...
;)
Antwort von WoWu:
..... true, at least not as long as old designs and "production corpses" from the old time HDV s.Käufer to be. a is the old parts just new software überstülpt and hoped it remembers None. Perhaps there are some who do not remember and then when the new generations are s.Camcordern, again with the old vehicle off and cry.
Antwort von Container:
... and perhaps even more as additional information for you as "practitioners". MainConcept and DICAS, so the two main Manufacturer of NLE algorithms do, incidentally s.den standard. Thus, AVID and ADOBE have been standard-compliant. Only for the practitioners, the standards seem to be interested and not take everything as it comes. For me, this is not real but merely practitioners users without background knowledge.
Antwort von wolfgang:
No sooner has one theorist to the reality that he is abusive and corresponds to a any background knowledge.
As if I could for what that is as yet quite a few 1920x1080 AVCHD camcorder, there, and that the majority holding is still in 1440x1080 record. But you can ignore so tenderly, gell?
Really admirable but it is hearty and good general mucking around: at least keeps the whole industry is not s.Standards, HDV devices are "production corpses," Today's equipment in AVCHD 1440x1080 offebar synonymous.
Each its own reality, one can only say! For what cause all this simple truths in the high bourgeois ivory tower of science ...
Antwort von bonnp:
ahoy again.
honestly, I am now more confused than enlightened.
I will be me just iLife'08 care, then what can be done. most unfortunately, I do not understand, because I filmed themselves in an absolute layman am vorallem I just know no technical background.
if someone finds something new, a small converter program or what is synonymous, I am glad about any help, they are synonymous if I do not understand. :)
regards,
b.
