Logo Logo
Billig Rigs/Lights/Video-DSLR Accesoirs

Cheap rig / lights / video HDSLR accesoirs

Frage von Fader8:
Januar 2012

Hello \u003cbr /\u003e\u003cbr /\u003e I came across lately on some rigs / Camera accesoirs pages and most have meant that I left them right back! Quite simply because the vast Prices. Now I wanted to ask, what is it for Manufacturer, of which produce low-end to mid synonymous such accessories? \u003cbr /\u003e\u003cbr /\u003e Thanks and regards

Antwort von wenzel chris:

\u003cdiv class=\

Antwort von handiro:

The prices were too high, however, before I went off the 5-6 years before an expensive rig DVTech bought in the usa and keep for so long until I find something better. \u003cbr /\u003e There is some curiosity on the gini rigs booked for a little less and then there, of course, poor grotto shaky for a few copies, of which one should let the finger.

Antwort von McFlintwood:

How about this? \u003cbr /\u003e\u003cbr /\u003e \u003ca href=\

Antwort von Fader8:

So I have to say simply that I find these rigs completely overpriced! The material cost for this "stuff" will probably not be too high ... I think reason is that the majority of factories are! \u003cbr /\u003e\u003cbr /\u003e @ McFlintwood: not answering my Question, but a good example what I mean with immeasurably.

Antwort von McFlintwood:

Overpriced is always such a thing. Are $ 17,500 for a RED-1 over-priced? And so is only the Body .... ;) \u003cbr /\u003e\u003cbr /\u003e You have to see one on the Page just that video HDSLR-accessory is not the mass market, like other areas of the photograph. And you have to wonder just what you want to do with it. \u003cbr /\u003e\u003cbr /\u003e In the precious crown Pocket Rig you get something with which you can handle your camera has a lot of "cinematic". I think it's expensive but not overpriced.

Antwort von McFlintwood:

How about with something? Although this is minimal, but it keeps the camera very still can mount accessories ... \u003cbr /\u003e\u003cbr /\u003e \u003ca href=\

Antwort von Frank B.:

Girls like me do not need a rig that needs to be compatible with other devices. It would be enough if it is tailored to your own camera or their own cameras. So I'm thinking about a self-made. First steps I had ever published here. \u003cbr /\u003e http://forum.slashcam.de/viewtopic.php?p=465410 # 465 410 \u003cbr /\u003e\u003cbr /\u003e I will if I ever have a little more time ;), try something more solid. Anyway, I'll no500, - ¬ or more to spend on a rig with follow focus, matte box and shoulder support.

Antwort von cuBBstR:

I am here for the decision: \u003cbr /\u003e\u003cbr /\u003e can be kept quiet so great.

Antwort von le.sas:

I've struggled through now to me a cheap rig with shoulder support, handle order to intervene and follow focus. \u003cbr /\u003e I'm spoiled and arri Chrosziel, I did my course, difficult to buy a cheap home for me. \u003cbr /\u003e next to me now is a freshly unpacked of veedion, has cost 400 as described above. \u003cbr /\u003e somewhat difficult, but otherwise the first impression forth amazingly well. The ff is going well, only the set screws the hand grips are not the burner because they do not want to really grasp, but there can be hinbiegen with gaffa what.

Antwort von nachtaktiv:

then do some comparison video between the small and the no name brand software ... would interest me very much because here: \u003cbr /\u003e\u003cbr /\u003e \u003cbr /\u003e\u003cbr /\u003e The atmosphere is rather contra no name ....

Antwort von le.sas:


Antwort von nachtaktiv:

many thanks for the info! \u003cbr /\u003e\u003cbr /\u003e I even flirtatious with the here: \u003cbr /\u003e\u003cbr /\u003e \u003cbr /\u003e\u003cbr /\u003e\u003cbr /\u003e ok, that is for commercial purposes rather then material will benefit, with the associated prices, I find synonymous totally ok ... I just believe that the differences between brand and noname \u003cbr /\u003e the final results are small enough that you need for private purposes noprofi hardware ...

Antwort von B.DeKid:


Antwort von tommyb:

Full ACK@B.DeKid \u003cbr /\u003e\u003cbr /\u003e I've even seen with Lanparte things. The follow focus works as it should - smooth and precise and above all without any play. Costs only a little more than the whole game stuff is usually offered on the eBay.

Antwort von le.sas:

In the mattebox from the Ebay link I see little sense synonymous. \u003cbr /\u003e Not just go to look for a "real", or anhauen NEN hire, who sometimes synonymous with old 4x4 Studio. \u003cbr /\u003e\u003cbr /\u003e Incidentally, I had often been synonymous Nike and Etnies shoes that were broken after 2 days ..

Antworten zu ähnlichen Fragen:
Although Canon EOS 5D Mark II full frame video HDSLR ago
Cheap rig / lights / video HDSLR accesoirs
Reflections on the current state VDSLR vs VIdeo
Maximum video clip length of DSLRs
3D video / movies with 3D Lens and DSLR
Film Reviews: DSLR Video productions at the Berlinale 2011
Video - DSLR / EVIL below 1000 EUR possible (instead of a new camcorder)?
Pentax occurs with K5-VDSLR the HD video at Club
Video link with Microfoneverstärker (Beachtek DSLR) WHY?
Canon Europe music video shoot with 8 VideoDSLRs
What features in the next generation DSLR video?
Comprehension questions for video DSLR
Ultra Cheap Movie Tricks and Practical Effects
Neue LUPO LED Lights
!ALLE! Pretty Lights Alben - kostenlos -
Kann mich nicht entscheiden zwischen field monotor oder shoulder rig
Shape: Günstiger Kamera-Cage für Panasonic S1 und S1R sowie weitere Rig-Setups
Ronin SC an Rig befestigen
SmallRig Sony a7 iii Rig Fieldmonitorhalterung etc. Testbericht
Das 2000€ Euro iPhone RIG System
DSLR Rig selber bauen
Praxiserfahrungen Fig Rig?
Camera Rig zusammenstellen + Infrarot Mod Machbar?

weitere Themen:

Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Avid Media Composer
Final Cut
MAGIX video deLuxe
Pinnacle Studio