Logo Logo
/// 
Umsetzen Super8 Filme

Converting Super8 films



Frage von Hans1000:
Dezember 2008

I want a few hours Super8 movies to digital implementation. An expensive thing by the relevant industry can make, as I've noticed. My question: Is the conversion with the help of a 80 Euro Umsetzbox, which with the projector is projected and the recording of this image with your own camcorder much worse than the expensive professional version?
Please note, if necessary, whether it is on this topic already has a thread there
MfG
Hans



Antwort von Bernd E.:

"Hans1000" wrote:
Super8 ... ... ... to digital, where applicable, please indicate whether it is on this topic already has a thread there ...

There are some, but the latest is this one:
http://forum.slashcam.de/super-8-filme-konvertieren-vt65972.html



Antwort von B.DeKid:

Gude

I use this after several tests now a farmer and a projector Hama 8mm "framework view" these movies I with Mini DV Camera from SD.

This works in real space with good default is pretty good.

Ich hab mir synonymous already had trouble with the film material transmitted scanners s.zu fumble. But takes hours and is not really easy.

MfG
B. DeKid





Antwort von Hans1000:

Thanks for your answers. So a lot smarter but I am not yet. Specifically: With Conrad, I have seen a box that supposedly solves my problem. Requires only one additional Super 8 projector and the camcorder. Only synonymous, the staff did not know, especially if quality was useful rauskommt.
The device seems s.der side s.der a screen and a long lens to have. Inside is probably a 45 degree mirror. has someone experience with this device?



Antwort von Quadruplex:

A few cents



Antwort von B.DeKid:

Yes such a device is the Hama framework I use.

You beaming because of the Picture and take it on the screen.

AMI Prinziep a TV

MfG
B. DeKid



Antwort von mmohl:

Have you ever tried the camera next to the projector and simply abzufilmen without Ancillary? In my experience, is not the small offset between the axes the problem. Problem is when Abfilmen different frame rate, the films that I've shot, had 18fps. This may cause a brightness pumps in the recording lead. A work around is a projector with infinitely adjustable speed or sometimes changes s.der exposure time. So if it is pumping at a different speed abfilmen (sometimes rich minimal changes) and in the editing program back on the right speed correct (if major changes were necessary).

I get the best results if I simply on a white A4 sheet had projected (better than on the big screen).



Antwort von opel:

Hello,

the camera directly in front of the lamp to the projector, I would in no case make.
Otherwise thank you like the chip in your camcorder to it an unpleasant way - direct sunlight can however still be harmless.
Not without reason, the converter of HAMA etc. always a milk glass integrated.



Antwort von B.DeKid:

"mmohl" wrote:
.......

I get the best results if I simply on a white A4 sheet had projected (better than on the big screen).


Prob the white sheet is the projector lamp produces a spot.
On the other hand, helps radial outlet finished gray point.

MfG
B. DeKid

The matte box is glass but is better suited.
The speed regulating s.Projektor is synonymous important, but think it was all clear? Or?



Antwort von mmohl:

"opel" wrote:
the camera directly in front of the lamp to the projector, I would in no case make.

Who had to do before?



Antwort von rhubschmid:

Have I made synonymous times. Unfortunately, with an unfavorable outcome.
I also placed the box of Conrad had.

Problem: Flickering s.schlimmsten and the Hot Spot!

Teach you not almost gone. Ok with the aperture setting and the shutter, you can make a lot, but you will not be happy.
Some areas are clearly overexposed.
Masks, etc. bring to the post not much synonymous.

My current solution:
Conversion rate of Telecine with new lamp, camera synchronization with the projector and a new lens

This should be better (not all have built-in), but will cost some Euro



Antwort von Hans1000:

Thank you all, now I am smarter! So, Conradbox will not be.

Greeting
Hans



Antwort von Schleichmichel:

You can of course synonymous times the hours s.Super8 material closer look, whether anything like this in the digital warehouse to be chartered. With a favorable press, including dry adhesive tape, you can then weed the weeds, making a Super8 film private collection of sometimes several hours to less than 50 minutes coming. Since I have been our neighbors under the arms and grabbed him with scenes selected and then assembled. After several attempts, he has been synonymous clean splices made, and it seemed to him to make fun synonymous. It amounted to that he had collected after the cut in the coil projection so well liked (synonymous qualitatively times after I've cleaned his projector), that it is the need for scanning is no longer seen.

If you are in any case zusammenschneidest, you can then so can scan 1A. The best in service, not with vague descriptions of their technique wait ... it's just mostly eh (at the cheap sellers) a oller camcorder, which takes up a canvas. That can certainly do better myself ... at least cheaper. But fun does not do that.



Antwort von Bruno Peter:

Hier


Antwort von Hans1000:

"Bruno Peter" wrote:















weitere Themen:
Spezialthemen


16:9
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos