Frage von Presento:
DVRaptor have a map and videos of a VHS recorder wishes to place on your PC. A page with the necessary cables SCART (other Page S-video) and the software "Mediascope" of Canopus, I just get a black and white picture with no sound.
Who can help?
Here's a link to the Raptor card.
http://www.ericvandenberg.nl/images/dvraptor.jpg
Gruss
Antwort von frywa:
DVRaptor have a map and videos of a VHS recorder wishes to place on your PC. A page with the necessary cables SCART (other Page S-video) and the software "Mediascope" of Canopus, I just get a black and white picture with no sound.
Who can help?
Here's a link to the Raptor card.
http://www.ericvandenberg.nl/images/dvraptor.jpg
Gruss
Urs Hello,
The Raperkarte man can not bring material analogous to the PC.
This is only possible with DV material,
Greeting frywa
Antwort von Presento:
Hello frywa
Points for you what are the composite and S-Video in and outputs on the card?
Antwort von Jörg:
Hi,
The inputs are, how you been writing, S-VHS jacks, but you take on VHS! Look in the Canopus forum in the Raptor section!
Gruß Jörg
Antwort von hannes:
> With the Raperkarte man can not bring material analogous to the PC.
This is only possible with DV material,
Here the author is wrong!
By Hosiden input capture can be very good.
Canopus is a tool specifically for disposal.
Antwort von Presento:
Hello Hannes
Now I am back s.Anfang. With the VHS and S-Video nor a shine to me. The tool of Canapus I have already, but just the video signal s.dem VHS recorder is only black and white and without sound on the PC.
Do I have the wrong cable?
Antwort von Markus:
Hello,
a color video image is reproduced in black and white, if a (2-pole!) composite signal
Cinch -Male) in einen (4-poligen!) Y/C-Input (
(Y / C = Male SVHS is fed
Cinch -Male) in einen (4-poligen!) Y/C-Input (
times). If you want to capture VHS in color on your calculator, you need a composite video signal to a composite zuspielen input.
Antwort von Presento:
So, I now have an S-VHS VCR connected to borrow and Picture and Sound is everything OK
Now it's down to fine-tune. Videos will play on the PC with jerky.
Anyone who knows his way around with the settings in Media Scope of Canapus?
Hello Jürg, thank you for your tip.
Antwort von leini:
Hello,
so very wrong, this was not "the DVRaptor" can not absorb analog video material. Although you can zuspielen a video signal, but there will always ibid jerk or liquid, and stamps will be great. The analog inputs of the Raptor is primarily to be looped through the overlay was intended. Until the penultimate driver version 2.11 does not even helped. It was only in V2.12 gabs a software overlay, because the calculator has been relatively fast (700Mhz). With the software overlay were synonymous then the analog inputs, and redundant, it was just created a tool with which to record "could. But only almost.
Under the Raptor line can not absorb analogue material.
"While you can capture to the Canopus DV codec, you will probably have dropped frames and poor quality."
Antwort von Presento:
Hello Leini
Thank you for your comments.
I do not understand what brings a loop through the video signal, or has been, if the analog video material was available so e is not on the PC. Or am I understand what is wrong. Or what is meant with overlay? Or is a different codec helpful?
