Infoseite // Datavideo DAC-100 defective?



Frage von JMitch:


Hi folks,

I have looked on eBay a used DAC-100 concerned - although with some traces of use, but that is not me.

I have before, so in combination with a Panasonic S-VHS (+ TB) VHS recordings to play on. The synonymous to me, I must still care!

As I have the DAC-100 with the analog outputs of my DV-Cam have tested, I was initially happy with the good picture on FBAS!
But then the bad surprise: NO PICTURE ON S-VIDEO!

Now the question, I have something wrong? The device should auto detect whether CVBS or Y / C arrives.

A return s.den seller seems to me to be excluded, so I opened the device, but I can not contact problem s.der jack see what I can fix itself would :..-(

If there is no solution to the problem, it is still in a Panasonic VCR with TBC to invest and then just over FBAS on capture?

Please help me!

Greeting
Alex

Space


Antwort von Frank B.:

Hi Alex,

1. What have you been playing for? Are you sure that an S-video signal is sent (conversion in the player)?

2. Do you have any to CVBS input supply left? Sometimes priorities for devices in the circuit with.

3. Is there a manual switch? (Certainly not, because otherwise you would have already found the safe)

4. Maybe the cable is broken?

I know, unfortunately the device does not, but the popular things are often sources of error.

Frank

Space


Antwort von JMitch:

"Frank B." wrote: Hi Alex,

1. What have you been playing for? Are you sure that an S-video signal is sent (conversion in the player)?

2. Do you have any to CVBS input supply left? Sometimes priorities for devices in the circuit with.

3. Is there a manual switch? (Certainly not, because otherwise you would have already found the safe)

4. Maybe the cable is broken?

I know, unfortunately the device does not, but the popular things are often sources of error.

Frank


Hello,

I have been playing on the one of a DV camcorder and a digital DVB receiver, both as synonymous CVBS S-Video. The two outputs of the devices are always active, can not be switched off.

When S-video attempt, I had NO FBAS cable! A manual switch, there are not synonymous. Halber security I have with two different cables, tried - without success. On television everything works fine!

So it seems something in the unit to be defect?

Greeting
Alex

Space


Antwort von Frank B.:

"Anonymous" wrote:
So it seems something in the unit to be defect?


In fact so. If you are lucky, maybe it is just a broken solder s.der Hosidenbuchse. If there is more to be sure it will be expensive, since you will probably only lead to a workshop.

Frank

Space


Antwort von Markus:

"Alex" wrote: [ebay] A return s.den seller seems to me to be excluded ...
... but it would still try with vigor, if the article had been fully described. In this case I would synonymous eBay notice that the relevant Seller an article with faulty description has sold and now it will not take back.

"I myself" wrote: What, however, I would like to strongly advise against is the second-hand purchase from eBay with Advance! Recently there is news that more and more sellers defective equipment as "new and fully functional" auction, in striking degree. If already have a camcorder on eBay auction, then necessarily personally go to the function of ability to convince, and only pay for the device with them.

Here are a few examples of deterrence:
" SonyVX1000E: Wie weit entfernt vom Totalschaden?
" Problems with JVC GR-S707
" VX1000 reagiert nicht auf Start-/Stop-Knopf
" ...

Source: Posting on 31.05.2007 at 20:39 clock

Space


Antwort von camtv:

Go!

Auffe Fresse! Thus, we have previously done with such Lurchis! And since the world was still in order!

Purchase at me soon! Without ebay!

Space


Antwort von ar8001:

... Haaaaallo!

OOH! Now's thick! Let your hair is no good s.Verkäufer ;-)
But I must, unfortunately, made him the line of services! The donkey I was!

I discovered that on the front panel before the book about 2mm thick plastic ring hangs and the S-Video Male prevent completely into the jack to slip. Now I have the board open and operate the S-Male without front bezel completely plugged in - and lo and behold, a perfect S-Video Picture!
Because the DAC is needed anyway, I have a cutter with s.der drill the plastic front bezel ring s.der clean weggefeilt. Klappts Now!

So sorry that I have harassed you, and not to the seller scold. :-)

Greeting
Alex

Space


Antwort von Frank B.:

Now the poor guy would have been totally in vain but a few of the "Fr .." get o)

Frank

Space


Antwort von Markus:

Well at least there was a positive solution! That is not always the case - how to get the answers all too well to read it.

Space



Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash