Frage von leotom58:
Dear XDCAM users
I now have long been a constant image noise when shooting with my EX3. I have all the PPs were to be found here so tried, none has been satisfactory. What am I doing wrong?
LG from the land of the red eagle
Thomas
Antwort von tommyb:
Gain on automatic?
Antwort von nordheide:
Camera reset
ND filter
Gain to 0
No PP
and then look again in daylight or good lighting
Antwort von Korbi:
I can believe in the ex-models to gain even put on the negative example that is -3 db. I've not yet tried.
Antwort von nordheide:
I can believe in the ex-models to gain even put on the negative example that is -3 db. I've not yet tried. Yes, but gain should be 0 already synonymous not produce a large noise.
Antwort von leotom58:
Thanks for the quick tips!
@ North Gentile
Have the camera resets, No ND filter, gain to 0 and standard PP and behold, just a better result.
I approached the thing as hard and have taken a reading in the theater. I'm still not quite satisfied, however, already close.
LG
Thomas
Antwort von nordheide:
Thanks for the quick tips!
@ North Gentile
Have the camera resets, No ND filter, gain to 0 and standard PP and behold, just a better result.
I approached the thing as hard and have taken a reading in the theater. I'm still not quite satisfied, however, already close.
LG
Thomas Well that sounds good.
I think (s.Wolfgang Thanks!) The trunk-pp
http://www.fxsupport.de/pp.html
really good. Did this for indoor lowlight, however, with changes to reduce the noise:
crispening: +80
Black Gamma: -3
low key sat: -3
However, referring to the one ex1
Antwort von leotom58:
... I'll still try it's with my EX3.
LG
Thomas
Antwort von nordheide:
... I'll still try it's with my EX3.
LG
Thomas was to constitute in any case something:
crispening: +80
Black Gamma: -3
low key sat: -3
