Infoseite // Experiences and problems with SonyHDR-SR1E - Help?



Frage von cragem:


Hi,

since a few days I have the SonyHDD recorder HDR-SR1 (E) urope.
I think the device is good, the pictures are in my view, sharp and color, at least in XP HD. The films can be supplied with the Sony player synonymous look quite good, although on my PC a little hesitant to run (Mobile Pentium 4 with 2.1 GHz, not a duo). The calculator is only a few months old and has 2 GB of memory. Playback of AVCHD requires a lot s.Rechenleistung ahead.

The AVCHD files can be otherwise with any other program play. A solution only requires the installation of a codec, for example in the Power DVD 7 will be supplied. After I had installed this I could AVCHD files in PowerDVD 7 as synonymous in WMP 11 play. However, the picture is still jerky, so that there is no fun to see movies there. It remains the only and sole of the Sony player on my system works ok.

Complicated is the conversion or processing of files. So far I've only done with the AVCHD files into the Sony Converter to MPEG2 or DVD format to convert. All other programs will lead to bigger problems, which I now describe. I hope I can help someone.

1) Xpress TEMPGenc 4 (DEMO), the AVCHD files. The program does this through the of PowerDVD 7 is installed codec. The installation of Power DVD 7 is therefore a prerequisite. Unfortunately I have not yet managed the AVCHD files to MPEG2 or other format to convert. The following problems occur: first, the sound could TEMPGenc from the AVCHD file is not processed, so that I had with XPORT DEMUX. The sound works now. Unfortunately not the image conversion. Either the film runs too fast (twice as fast as desired) or jerky. I have different settings. I think that the AVCHD 1040i file with 60fps. This brings at least the best (but not satisfactory results). I have everything from 25, 50, 60 fps interlaced with each progressive elected as synonymous. Also for the output file, I tested various settings. I have been synonymous with the de Interlacer off, but nothing has been synonymous. My desire is to convert to 25fps progressive. Did someone give an Instructions?

2) Elecard Converter Studio was able to file a brief in a very good quality conversion. Here is my opinion, not the codec of Power DVD is accessed. All Rings, the program is only a DEMO version and crashes for me and out again. If there is a full version of this, I will look at each case

3) Various freeware programs like "SUPER" of eRightSoft all have the same problem as with TEMPGenc - convert the file to run twice schnelll.

I have been synonymous with another of COREAVC codec installed. This has however no success gebrahcht. TEMPGenc the files could not be read.

How does your conversion? I would like a good MPEG2 file or an HDV file and it will generate in a video editing program.

Do you have an idea?

Space


Antwort von ruessel:

Quote: ch would like a good MPEG2 file or create an HDV file

This would be synonymous me interested .... SR1 + UX1 my movies, I could in Digital Fusion and invite still good even color, without the big man was able to detect artifacts. When you save in MPG2 (25 Mbits), the quality rather modest. Even when converted with the Sony-owned transformer (MPG4 to MPG2) the image quality is terrible. If just a MPG4 format be?

Space


Antwort von go4java:

About the use of the Power DVD 7 contained CyberLink Codec (H.264 / AVC) is apparently with the Procoder 2 mepg2 files, which can then be edited:

http://videotreffpunkt.com/thread.php?postid=46344 # post46344

Alternatively, you can apparently synonymous Canopus HQ files, if you have Edius system, and Power DVD7 with the codec installed. Canopus was somewhere in the forum reported.

The announcement of Canopus Converter can currently do not have PAL, which should come first.

Space


Antwort von go4java:

Adobe Premiere 2.0 with MainConcept per HD plugin.
Adobe Premiere Elements with the same plugin.
So much for professional and Final Cut on the apple.

Space


Antwort von dj-senol:

[quote = "Anonymous"] About the use of the Power DVD 7 contained CyberLink Codec (H.264 / AVC) is apparently with the Procoder 2 mepg2 files, which can then be edited:

I've tried, but the same problem as with the TEMPGenc .... MPEG2 files generated by running twice as fast as desired ....

Space


Antwort von rootfire:

So for me is the following:

Super: Picture is very little difference to the original ... just no sound! I know why .. just do not have AC3 and ... to show directly in default soundtrack ... only if I get another auswehle show goes straight away: (

for Premiere 2.0 with MainConcept codec can I import it in Premiere but the picture is only half visible and the rest is green ...:/ with pixels ...

In TMPG Express 4 ... just as synonymous beeping sound ... but here synonymous Picture genial ...

only with the Elecard Converter of it ... but s.einfachsten limited to 15000 frames and the quality is not quite as good ...

With the Converter Tool of Canopus gehts but only as Avi Inportieren to stream into Edius and as synonymous only in NTSC format ....

Yes and Sony software ... only the regular DVD format, you can convert higher resolutions do not go .. and the quality is limited ... because I would have more of Sonyerwartet achso ... and Vegas is only s.dem spring AVCHD support .. ..

the Canopus Pro Coder of s.Version 2 with H264 AVCHD codec of Power DVD ... super sound .. also expected down to stereo (sound is not AC3) Picture is almost synonymous as the original AVCHD. Until now the best solution, however, for 12 minutes of film, my 3 GHz Pentium 4 HT Calculator with 512 MB Ram and a little over 2 hours ;-(

if one knows a quicker solution ... I'm open for everything ....

Greeting

Christian

Space


Antwort von Urs:

Hi, since a few days ago I SonyHDR the synonymous-SR1 and initially had the same experiences. Now the thing works quite well. I work with Premiere 3.0 and have a MainConcept plugin installed (Notebook, 2.26 GHz Centrino, 2 GB RAM). When cutting bucking the scenes rather, after the issue (definitely MainConcept dial), the films, but very beautiful. Anschauen can afterwards over any tools, the MPEG files can show. The quality is good.
The native streams s.Cam plate shows me with the Elecard MPEG Player. This works exceptionally well.
The problem I find the camera pans (bucking) and frequent pumping the sharpness setting. I recommend s.Tripod in principle to work, preferably no pans installed and the sharpness of manually (control show ring). Basically I have very much "cleaner" than working with the Pana GS-400.
In Lowlight range (normal room brightness), I am disappointed of the quality of Sony, as the classic cuts DV better.
Exceptionally well I like the handling and the ability to immediately view the streams.
I think that the integration of improved codecs with other editing applications in the future will bring significant improvement in quality. Greetings, Urs

Space


Antwort von Jan:

You have already you really hard!

New Programs CyberLink PowerDirector 5 Premium Ulead and InterVideo WinDVD 8 Platinum! Gold is not synonymous to support the MPEG 4 H 264er, could someone test if it is because with the SR 1 & a possible variant is satisfied.

Edius probably have a few SR 1 user - just a different class.

2.8 GHz Processor for viewing writes Sonyvor yes. The MainConcept codec HD is certainly outstanding, only the 400 ¬ are rather few SR 1 owner invest.

In the future, but soon several good opportunities.

VG
Jan

Space


Antwort von SDTLC:

Have synonymous Premiere Pro 2.0 and the Main Concept plug-in, for me the problem occurs, however, that a picture of the video repeatedly, this leads to ugly rucklern. Perhaps someone can help me.

With MainConcept I have already requested, but still received no reply and if you look at it in the forums around the customer service is lousy to non-existent.

Space



Space


Antwort von dihofi:

an idea would be a new
fast computer with a lot of hard drive
throughput and to purchase, plus the black magic
HDMI decklingkarte buy and live in fullhd record.
gruß cj

Space


Antwort von MarcelW:

Hello folks! Will synonymous me the HDR-SR1 buy but I am still not sure! What do you think of her? Or rather not?

But to your problem! 've Often dealt with these files!
Goes great with Pinacle Studio 10 with the endsprechendem codec!

Please and Thank You!
MFG Marcel

Space


Antwort von ewu:

Did the SR1 synonymous only been 3 weeks, but I am full of enthusiasm of
Quality in HD mode. Can you only agree to purchase.

There is at me a few transmission problems on the LCD but I can still synonymous regulated.

Now I am s.suchen for a suitable player for AVCHD files would s.liebsten me a HDD player.

VG Uwe

Space


Antwort von MarcelW:

Thank you!

The problem with the player is very easy for me! 23.March! Hope I got my PS3 to be delivered! Ne already waiting forever!

Thank you for your opinion!
MFG Marcel

Space


Antwort von MarcelW:

Hi Uwe!
I do not know if this is possible for you but I still ask you out!
Could you maybe my times a little video to you? Thus I have a picture of the quality do!
If you're so kind, please contact with me: marcel.winkelbach @ web.de

MFG Marcel

Space


Antwort von Güni:

Hi,
I have the option:

[quote = "Anonymous"] About the use of the Power DVD 7 contained CyberLink Codec (H.264 / AVC) is apparently with the Procoder 2 mepg2 files, which can then be edited:

tries.
But in Procoder 2 can I use the orignal files are not selected. Question: should the *. m2ts extension yet to be nominated.

How do I select the files to MPG2 format and convert them?
Greeting
Günter

Space


Antwort von rootfire:

Yes you have only the original files in mpeg MT2 then rename the program finds them.

Then you can convert it into mpeg.

Achso eighth in the capture of the format. You have it in 16:09 / 04:03 Setting

Greeting

Christian

Space


Antwort von fleischregen:

Hello Christian,
thanks for the quick reply.
After renaming the files found. As far as good.
Unfortunately, the Procoder depends on the choice or he schliest without an error.
Do you have an idea what the error is?

Güni

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash