Frage von Frank B.:
Hi folks,
hab mal ne question regarding the circuit / distribution of an HDMI signal.
I want an HDMI signal to two outputs can then search a device with an input and two outputs.
On demand in several electronics stores were synonymous devices shown me that s.200, - Euro up lie. This split the signal auto (obviously have an amplifier built-in) on two or more outputs. But I am simply too expensive. I have been synonymous, some devices on the network found, are much cheaper. Among those is not clear to me whether it is called splitter, the signal to both outputs, or switch, which, depending on the active terminal, the output switch. The latter would make problems for me, since both devices may be active, so on, should be. Somewhere I read that some equipment problems with the switch, if for example the two HDMI devices s.Output active.
The best would be a passive device that is switched to manual. Such manual switcher I've already found synonymous. These are but in reverse direction signal is declared, that is, two inputs to one output. On Demand in an electronics market, I got to answer that synonymous only this direction is usable. One could thus such a device does not, like some passive scart, RCA or Y / C / CVBS switches, simple reversed-old complained. Who of you whether it is or someone knows a cheap device to about 50 euros, an input to two outputs can manual switch?
Possible but not ideal is not synonymous to a device that only splits, so both outputs enabled continuously without switching.
Frank
Antwort von robbie:
well, the cheapest is probably to simply umzustecken;)
Antwort von Frank B.:
well, the cheapest is probably to simply umzustecken;) Oh yes, thank you! That I had not even thought of yet.
But even if someone knows something or knows, I would be very grateful.
Frank
