Infoseite // HDMI to VGA



Frage von Videofactory:


Hello,
Recently, I have yet to clean up the basement a little older 10 "TFT Monitor found. Do it right times s.meinen PC and lo and behold, it worked.

Now I had the idea that this screen as a monitor for on the use (clearly, he is too old and too vague in order to be able to check whether everything is really sharp, but he could, for example, the director used to the perspective of the camera quickly to check).

The screen, unfortunately, has only a VGA port. My question is as follows:

My camera has an HDMI output. Is it possible that I have with an HDMI cable into the camera and a HDMI to DVI and go into this with a DVI to VGA (an HDMI to VGA, I have found nowhere else) and then with this in the screen?

Though it would be quite cumbersome, but if it would go would be really awesome.

Do I have the adapters in one direction observed (ie of HDMI to DVI and not vice versa) or is that no preference? (In the RCA to Scart is not so, for example, no preference).

Thank you in advance in advance.

Gruß, Alex.

Space


Antwort von WoWu:

In theory goes that because HDMI strictly synonymous includes an analog signal.
You'll only problems with the signaling of HDCP get, because even during the adaptation of HDMI DVI HDCP only after an additional data line to be signaled. The expensive HDMI / DVI include, but not later than the transition after missing your VGA monitor signaling, because the terminal must be synonymous certified.
Your Camera is therefore not more than 4:2 Picture s.den output. If you pitch, you do not synonymous, except for the OSD.

Space


Antwort von MHK:

Look here for times: http://www.hdfury.com/
They were repeatedly for this purpose is recommended.

On the Page synonymous actually find solutions to the HDCP issues, but now I s.der agency did not know whether the HDCP encrypted signal from the cam comes out, if not this is irrelevant.

MfG MHK

Space


Antwort von WoWu:

The HDMI signal is never secure .... it is not there, or will be in SD only released if the handshake does not work.
Technically, it is a relatively minor problem, analog signals and adapt to devices that do not support HDCP to combine.
Question is only if your camera requires HDCP. (Most cameras do this).
Then you use the expensive nothing, because your camera and SD, except perhaps the OSD is not s.den output.
The HDCP solution on this page was not really recognize ... and not selectable. And HDCP permanent modifications are not because HDCP is queried constantly and still others are dynamic hedging.
The part I enjoy with great caution.

Space


Antwort von MHK:

"WoWu" wrote: The HDCP solution on this page was not really recognize ... and not selectable. And HDCP permanent modifications are not because HDCP is queried constantly and still others are dynamic hedging.
The part I enjoy with great caution.


Do so right .. I had previously only flown over it, and not completely read ... HDCP stripper => http://dme.ghost2.net/hdfury/home.php?SID=33&deflang=en

Yet he could vlt. the normal HDMI2VGA help. ;)
Especially since the monitor vlt. not much bigger picture than SD if he can represent only 10 "and is synonymous already a few years old has.

MfG MHK

Space


Antwort von WoWu:

If you get with SD you just yet whether your camera to SD or BLACK switches if no HDCP can be built.
Then, the fold.
When the other company I would be very cautious, because they describe the "striping away" as if a signal shall be that you simply have to eliminate.
This is simply nonsense and even if a manufacturer with a valid HDCP Certification his box as a kind of switch should be authorized in between, the game is finished at the latest when the next update of Revocationsliste by running an HDMI signal. On the certification is revoked and then that you no longer have a functioning device.
HDMI and HDCP would not be where they are if the would be so easy.

But when you rich and your SD camera that does away ... You need it all anyway.

Space


Antwort von Videofactory:

S.euch Thank you all.

The screen is not always to the HD resolution, inasmuch as it would not be bad if the cam will only SD output.

Be it so just try and hope.

Gruß, Alex.

Space


Antwort von Quadruplex:

"WoWu" wrote: In theory goes that because HDMI strictly synonymous includes an analog signal.
Since when that? DVI is a VGA-compatible version, with HDMI, it would be me.
"WoWu" wrote: You'll only problems with the signaling of HDCP get
I am not aware of its signals via HDMI HDCP encrypted - so synonymous? With his own recordings can be - even temporarily - do what you want.

------------

Throats but times - and then spit out more beautiful!

Space


Antwort von WoWu:

Quote: with HDMI, it would be me. Quote: I do not know ...

Should I be surprised that now? Rather not.

Space



Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash