Frage von basti76nie:
Hello!
For my podcast project I have extra a wireless headset purchased. This is s.Audiomischer connected. The output signal of the audio mixer s.Mikrofoneingang then I connected my HV20. Unfortunately, you can hear in quiet passages of a hum :-(
Here you can look listen ...
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=269146614 What must I do for this to stop?
If the output level is too high or the sensitivity s.Micro input is too high ... I know it's not.
Greeting
Bastian
Antwort von etv:
Hi Bastian,
I know the HV20, but if you are in a manual Tonaussteuerung then you try it.
Ev. synonymous, it is simply "the way" of the cable - AC adapter with a pass or else around, where's hum without end "for free", there * g *
Other question: Why you have the mixer and not directly with the Micro pure?
Regards
TOM
Antwort von thos-berlin:
Try, with an audio program the sound nachzubearbeiten. With a fingerprint function s.einer spot where only the buzz is heard, an "impression taking." Then this impression from the File let out. Works quite well. I have the fan noise a PC almost completely removed.
Antwort von basti76nie:
Hello!
On thos-Berlin:
Since I will often wish to record it would be useful without additional software costs, the "hum" to remove.
Will the source of errors found and then I looked at the savings. Thanks anyway for the tip.
At etv:
The HV20 has a manual gain control. Then turning to me in future times down the cable and try not to lay power cables. (Although the synonymous was not the case)
I thought it would be better on the mixer to go. So I can sound better disqualify. Attempts synonymous times directly from the micro-receiver into the camera to go.
Greeting
Bastian
Antwort von nexxt:
If the hum is not already on tape, so you should hum like a loop handle
Antwort von nexxt:
Hello!
What is it please hum?
Antwort von Andreas_Kiel:
What is it please hum? Good
question.
