Frage von changnam:
Hello,
someone ne useful technology, such as a logo or lettering on a Micro-Winschutz himself?
I've already made two dirty :-(
Tips for Color or stencil?
Am grateful for every do-it-youself 'Tip
Regards
changnam
Antwort von Markus:
As a template would possibly Plotfolie in how they synonymous labels for the vehicle used. Then you could plot the negative Logo / weeding, then the slide on the foam and the glue applied Farbspray. After drying, the adhesive can slide back and solve the remaining sputtered logo.
Do you have something in the way already tried?
Antwort von changnam:
Hmmm,
exactly with adhesive foil ichs've already tried. One was not tight enough, because everything is lost and the other was no longer rational from :-))
I must admit, I have two left hands synonymous with the DIY.
Plotfolie, I have not heard, I googled werd times thereafter.
Thanks for the tip.
changnam
Antwort von Markus:
Plotfolie is only as a concept, probably because in the film adhesive label area piefig sounds. Avery Fascal 800 would be perhaps a possible product. How this film on foam behaves, I can not tell you. I did so only vehicles lettered.
Antwort von tobibonsai:
What colors have you used? Normal spray paint ätzt still in the foam. I believe that with tape you do not get far, because the foam has no smooth surface.
Antwort von robbie:
True wind protectors are "flocked" ...
One, I think, a good alternative is yes, if you have a fairly large logo searched, so you can use the yes or embroidery on fabric printing, and then this substance with a foam adhesive glue on it ...
Schöne Grüße,
Robbie
Antwort von thos-berlin:
I have someone in the club, T-shirts labeled with foil. The slides will be cut by Ploltter (like vehicle) and then "aufgebügelt". I have the time to ask whether so synonymous foams "bebügeln" or whether the melt before the film is solid ....
Antwort von -sky-:
dc-fix?
Antwort von robbie:
Bebügeln foams now würd ich nicht ... as screen printing would be a more appropriate procedure, I am thinking now ...
Aba my Print - times are long gone * gg *...
Offset I can definitely rule out: P. ..
But my thought was yes, to an arbitrary X-print fabric, iron or synonymous, and this substance is then switched to the foam to GLUING ...
If not on, and the RTL wind protectors (at least the older I think) have made similar ...
Antwort von biber65:
A good solution könnteauch such a tattoo, that you stick to the skin .. can safely remove the foam on synonymous. Times go into a copy shop. The tattoos can certainly produce such.
Antwort von hansreinhard:
Ironing or glue, I would under no circumstances, let alone something like folie! The foam must remain so evenly schalldurchleitend and is due to its porous surface unsuitable for pasting.
My suggestion: cut stencil and with
lösungsmittlefreiem Farbspray (acrylic?) Spray.
Gruß, Hans
Antwort von Wolfi.:
Or do a stamp ... White Color on a stamp and then druf it. The stamp can simply be made of cardboard. For each color, I would then take its own stamp. But try it first on an old foam from.
