Logo Logo
/// 
Mainconcept HD 4 Plugin H.264/AVC & MPEG  macht Probleme

MainConcept HD H.264/AVC and MPEG 4 plugin causes problems



Frage von bjelgorod:
Juni 2009

Hi Folks,
have me last week, the new MainConcept !" MPEG Pro !" HD 4 plugin
H.264/AVC and MPEG for Premiere CS3 / 4 (; Windows) purchased.
Unfortunately, it does not work as it actually is. The premiere will become very slow, which already starts with the creation of a new HDV project. Everything goes much more slowly than before. The aligning of HDV files synonymous goes much slower. Working on normal is no longer thought of, in - and Out points can be set only with delay.

I loaded a test, a previously-scale project (; Approx. 40 min), the only pure HDV clips (; without screens or filter was in place). Was a compilation of raw material. I wanted to test the widely praised smart rendering feature. Unfortunately was nothing, after 11% after 7 times, or synonymous with the system aborts the message "Can not allocate memory for raw fofo_ref. Well without the plug in has everything works. Have all synonymous with the setting "Optimize for performance and memory tried," always the same.

I have a new service specifically set up, has been synonymous nothing. The install or Nichtinstallieren of Service Pack 3 for XPpro synonymous brought nothing.

My system consists of an Asus P5K, Core 2 Duo E8400, 2X 2GB Ram Infinion
Win XPpro, Premiere CS3.2

Has anyone here already made similar experiences with the new plug in and perhaps a tip. Would really annoying when I would have paid money for a plugin that makes the work more slowly rather than quickly.

Thank you for your contributions have time



Antwort von r.p.television:

Hello.
Have exactly the same experiences made. This problem has existed since version 2 and APP 2.0.
There can be only small projects (; rule of thumb about everything up to a maximum of 17 minutes -) depending on memory or export only projects with a long timeline, but only a maximum of 2 files with smart rendering.
I have the plugin version 4 is now synonymous fetched. The fact that it still does not work better seems to be sure that MainConcept has no interest in a product that works for Premiere to create.
The results of the Smart renderings indeed be synonymous always to be desired. Although the smart rendering is really a smart rendering, but instead arise in scene transitions, sometimes violent image disturbances. The picture noise may be a further proof that we are dealing with smart rendering, because here the GOP is almost torn apart, but I thought we had found the picture noise is now a solution.
I previously used the version 2 in connection with APP 2.0 vorzuselektieren for my raw material into meaningful and merge files. Since the aberrations in the transition not so disturbing. But this is not really satisfying.
You can actually synonymous only work if the plugin is uninstalled. My workflow is as follows: (open under a different partition Premiere 2.0; without plugin) to create a completely normal HDV Project and there cut everything. Then, open in another partition, inter alia, the Project BS in APP 2.0 with plugin and export there. Otherwise it does not work.
As you will write with an active plugin premiere forced to its knees.
If you like this is stupid to ask your money back. I'll do the synonymous, because no improvement has occurred. On the contrary. CS4 is with the new plugin is still much slower than then the old 2.0 with APP.
Unless you still have CS3 and have to import AVCHD. But then rather just upgrade to CS4.
If you smart rendering is important for the quality you'll have to accept it. Except someone know a better plugin for it.



Antwort von bjelgorod:

Ha I just thought that it synonymous, there are other sufferers.
The plugin I've actually only bought because of the workflow and smart rendering, but not because AVCHD.
The call with the money back will not work out well. With the purchase you do accept all terms and conditions of MainConcept s.and to see a return of money on buying software does not, unfortunately.
I would be interested if there are synonymous people who successfully use the plugin without problems and with any system configuration. I will definitely send an inquiry s.Mainconcept again if there is a possible solution.








Antwort von WideScreen:

Oh, but that does not sound so great.
I have downloaded my AVC-Intra codecs because I need you. What is now synonymous work. However, I have only the demo version for testing. I could not have any restrictions Discover. However, I have worked since yesterday synonymous, no Project valid, but only once rumprobiert.



Antwort von r.p.television:

Of course you can claim your money. Since the general terms have nothing to do with it.
The product is not working or extremely faulty. Conclusion from.
I've already recovered views of MainConcept my Money. This went on. And synonymous to know that their product is defective.



Antwort von r.p.television:

"WideScreen" wrote:
Oh, but that does not sound so great.
I have downloaded my AVC-Intra codecs because I need you. What is now synonymous work. However, I have only the demo version for testing. I could not have any restrictions Discover. However, I have worked since yesterday synonymous, no Project valid, but only once rumprobiert.


Have you successfully AVCHD files can cut straight to the timeline or drawn only once a trial basis a few files to the timeline and converted (such as instances of HDV).
For me work only the latter. The direct trimming the AVCHD files not later than the third-clicking led to a crash. At least that worked to convert 40 minutes of material in one go, without error. With 40 minutes with HDV multiple clips came as was the case in version 2 APP 2.0 to various error messages such as "Can not locate frame" or memory is full, etc etc.
The plugin does not work in Premiere.



Antwort von Bruno Peter:

So, in CS3 the AVC plug-in runs. So far, all green with clips of the Pana SD300. Good had been only a 5minutes Project.
Schaun'mer times!



Antwort von r.p.television:

"Bruno Peter" wrote:
So, in CS3 the AVC plug-in runs. So far, all green with clips of the Pana SD300. Good had been only a 5minutes Project.
Schaun'mer times!


Have you already successfully installed with plug-CUT? And although at slightly more than 5 minutes.
In the shorter timeline is synonymous with me. But not without jerking bie AVCHD. Even HDV clips in the timeline does not run very smoothly.
Try synonymous times whether a longer timeline with HDV clips with you exportable without demolition.

Another criticism is that if you have a MainConcept Project creates the second monitor no more than with full-screen preview monitor display can be used, because the menu structure changed completely, and this option is not selectable.



Antwort von Bruno Peter:

"Have you already successfully installed with plug-CUT? And although at slightly more than 5 minutes."

Yes, works.

"In the shorter timeline is synonymous with me. But not without jerking AVCHD bie."

Nope, it was not jerky, now a 60Minuten Project.

"Even HDV clips in the timeline does not run very smoothly."

No problem.

"Try synonymous times whether a longer timeline with HDV clips with you exportable without demolition."

With AVCHD clips, rendering AVC was filled by not aborting ...

"Another criticism is that if you have a MainConcept Project creates the second monitor no more than with full-screen preview monitor display can be used, because the menu structure changed completely, and this option is not selectable."

That's true!



Antwort von r.p.television:

Then the plugin package seems to react extremely bitchy to different infrastructures in the computers.
But as I by no means the only one and am my calculator more synonymous with one of the faster current component is the plugin works incorrect. For all versions of Premiere plugin run without properly. If I'm not mistaken is highlighted on the homepage of the manufacturer to the system that the host software are binding. At this point, the time is already not true.



Antwort von Bruno Peter:

My calculator is working with one Q6600, 3.2 GB of RAM and under W-XP-SP3.
The CPU usage during rendering was approximately 86%, incidentally, one could still do something else.

One older plug-in of MC has caused similar problems for me as you have described it, but then still with PP 2.0.



Antwort von WideScreen:

Quote:

Have you successfully AVCHD files can cut straight to the timeline or drawn only once a trial basis a few files to the timeline and converted (such as instances of HDV).


No, as I said, is about AVCIntra me, I have no AVCHD files. This can be synonymous CS4 even without the plug in.








Antwort von bjelgorod:

So, I wanted to describe briefly the development of my case. I had placed a support request from MainConcept, but unfortunately got no response.
Today, I turned it s.den sale and, as of rptelevision recommended that the resignation of the said Purchase.

A friendly woman answered me immediately the following:

"I am very sorry to hear that you are not satisfied with our product are synonymous, and that our support team has unfortunately not responded to your request, we will investigate the internal course here!
Of course, you can withdraw from the purchase, I will forward the relevant steps in the way our webshop and contact providers, which is responsible for payment of our online sales, as soon as possible for you to get the purchase price refunded. "

So, very friendly and works synonymous refund, as described of rptelevision. A 30% coupon, I still get synonymous.

So much praise s.Mainconcept, synonymous when it did not work with the plug-in (; For others, it indeed works, how could hear of Bruno).




Antworten zu ähnlichen Fragen:
Softare to create or MPEG-1 container
Mainconcept Codec Plugin für DaVinci Resolve bringt Support für HEVC, Sony XAVC/XDCAM und P2 AVC Ultra
Arbeiten mit AVC/H.264 Dateien (MPEG-4)
Warum wird bei eingestellten H.264 eine AVC Coding Datei exportiert
MainConcept MPEG Encoder Wasser Logo
h.264 or mpeg 4 or 263
MPEG-4 H.264 mit einer DVB-C Karte
Problems with TV/video sequences burnt to DVD
Squeeze 5 oder Mainconcept H264?
MainConcept plug in beta für Resolve 17
http://www.mainconcept.com/mainactor_v5.shtml
MP4 in AVC-Datei verlustfrei remuxen?
Canon EOS C70: 12 Bit RAW in der Praxis (inkl. Vergleich zu XF-AVC)
Canon C70 Update - XC-Protokoll, besserer Autofokus und 600Mbps XF-AVC bis 60p
Mainconcept PVR 1.0 und HauppaugeWinTV PVR 250
mpeg(NTSC) in mpeg(PAL) wandeln
Neue Firmware für Canon XF705 bringt neue XF-AVC- und MP4-Aufnahmemodi
Neue Firmware für Panasonic CX350, CX10 und CX4000GJ Kameras bringt u.a. AVC-Proxys und 4K-Streaming
h.264 Bitrate
H.264 codec
HEVC vs. H.264 Dateigröße
PP2020 - h.264 Export
H.264 TV Aufnahmen eindampfen
H.264 für Linux
VirtualDub Plugin
Mpeg 2 zu Mpeg 2 oder Mpeg 4?

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos