Frage von MADinP:
Hello,
after I've now since a few hours, tried a proper lens hood for the title referred to wide-angle lens and neither Google or B + H video in this forum yet found anything I hope I'm now on the expertise and the creativity in this forum .
I had finally a rubber lens hood 62mm filter thread (foldable) and was bought immediately convinced of the recordings. Unfortunately, I then sifting of material in the computer that the edges of the Sunshade saw.
(Until then I was not aware that the picture displayed on the monitor of my camcorder that of visible on the computer screen or television is different. Well, now I know it!)
Before this, I now rubber lens hood with the knife soon, I of course only once reinsure whether there are perhaps more elegant ways than with a knife.
When you browse the net, I encountered the following: http://www.adorama.com/KN065H.htmlhttp://cgi.ebay.com/62mm-Square-Hood-for-Digital- Video Camera # Black_W0QQitemZ7532422456QQihZ017QQcategoryZ64329QQcmdZViewItem Shipping Payment My personal favorite:
Antwort von Bernd E.:
To my surprise I could neither eBay nor elsewhere in the German trade a rectangular lens hood with 62mm diameter find. The matching filter diameter to connect only half the battle, because the stray light aperture needs so synonymous for the larger picture of wide-angle optics designed to, or you have at least the corners of the picture - you know this effect already ;-) Both of you linked Apertures only for normal and telephoto lenses such as wide-intent have s.deinem therefore makes no sense.
Gruß Bernd E.
Antwort von Bernd E.:
... somebody has an idea how to do a little more if they could buy it somewhere, umbasteln or adapter rings can fix? That would be the slightest problem: There are adapter rings, for instance, a stray aperture with 72mm threaded port s.das 62mm front threads of the converter to adjust.
Gruß Bernd E.
Antwort von MADinP:
Thanks Bernd E.!
Had I almost thought it was good and I have not ordered.
When the sun shines (Well, as often it does not here) is always a "schlieren formation. It's a cheap converter. But with the stray light aperture of rubber, it was much better, the times of visibility in the corners apart :-)
What did I do for alternative?
Greeting
MADinP
Antwort von Bernd E.:
What did I do for alternative? At the moment I would come three ways:
1. Wide-angle stray light aperture
2. Normal scattered according to a larger aperture with threaded connection and adapter ring
3. Matte, which s.die respective optics can be adapted
Gruß Bernd E.
Antwort von MADinP:
Hello Bernd,
according to these criteria, I have the internet already be trimmed. But I am no clever results.
A matte box is to me synonymous with expensive, if I must be honest. Also, I think that such a matte s.einer fairly small SonyHandycam synonymous would look odd?!
I would have on the bottom of the facts remain the same and I am here, as ambitious outing, but not as someone who has professional or semi would work.
I would like just a halfway decent picture and have a decent sound.
Perhaps there is another possibility?
Greeting
MADinP
Antwort von Kollektor:
You need a so-called "tulip."
Example: http://cgi.ebay.de/Sonnenblende-die-Tulpe-37-43-49-52-55-58-62-67-72-77_W0QQitemZ250149512783QQihZ015QQcategoryZ10601QQcmdZViewItem
On my Century-WW x0, 65 with 62mm thread, I have no problems with it.
If a shop nearby is a better test because your WW x0, 5 probably is a bit extreme.
Antwort von René K.:
tulip is probably what Cameras.
sees on a cam already rather strange and if it meets the purpose, the next question ...
Antwort von Bernd E.:
tulip is probably what Cameras .... The light, the aperture of the scattered light depending on the angle of incidence is held or passed through, it would be pretty no preference to what type of camera sits behind ;-) The original, on-Converter Canon WD-58h-owned scattered aperture is also synonymous tulip.
Gruß Bernd E.
Antwort von MADinP:
Hi
because I synonymous after a prolonged search in sun had found nothing which would have made me happy, I am on an idea came.
Even build ....!
Then I looked at an empty rectangular tank, which previously was filled Petrolium times, cleaned and sliced.
Then I with the circular opening of the bottle s.Boden marked and with a sharp knife to cut the lens fit.
Through a small notched ring, the sun even sits correctly and can only with some "fiddle" to solve.
Afterwards, I took so long opening cut up in viewfinders and in the later recordings of this lens hood edges no longer be seen.
Finally, I have the lens hood with matt black angesprüht.
Behold, the effect was exactly the same as the rubber hood with only without disturbing the edges.
And the whole sees itself not synonymous made of, but has only 20 minutes and cost 50 cent.
Greeting MADinP
Antwort von Peter06:
ha, look at my last contribution to my blogs, because you'll find it.
Antwort von MADinP:
Hi Peter,
pity, I would have known earlier times. Although I am now almost every week on your excellently written blog look. Such a pitch. But if you are interested then I can so you times a Picture of my self-hood to you.
Greeting MadinP
Antwort von Peter06:
yes, I am interested.
Antwort von MADinP:
Hi Peter,
better late than not at, I now hang me, as promised, a picture of my lens hood on.
Greeting MADinP
Antwort von Peter06:
looks really good. how is the part associated with the hc90? Just aufgesteckt? So this is the ground of petroliumflasche painted black, right?
Antwort von MADinP:
Hi Peter,
yes that is the bottom. I have three attempts needed to get the exact diameter was found. First, with circles and Reißnadel, then with a carpet knife slowly s.die markers herangearbeitet. The first two attempts went into the pants because I do not exactly and had worked carefully. I wanted to be ready soon. The last attempt, I have repeatedly tested between whether he was fit.
The Aretierung takes place at the 5050 about a small narrow Ringeinkerbung. Simple Page of the small delay of the converter and into the Ringkerbung einklicken. That's no way, but it fulfilled its purpose.
The result is a substantial improvement of the exterior shots. Of course, the sun a little longer, so that the lens could cover even more. This would have the effect of the sun the size of a matte box should accept. Exactly what I wanted to avoid.
That's why this version is a very good compromise.
