Frage von Sascha Schwarz:
Dear eavesdropping
I have a AG-DVX100 and if I with a Sennheiser ME-66 and a foam windscreen run, it just so that the Micro is not the picture stands out. The Question: If I have a fur windscreen about wants, I would have the Micro somehow "lift". Notice of you, a solution? Please nix what I tinker with it: do not have a metal tool and craft something with two left hands anyway :-)
Sascha
Antwort von Andreas_Kiel:
Is the Micro on a "standard" accessory shoe thing? Then perhaps you have a chance with an accessory rail, as they are in any photo shop for little Money gets. This would be the Micro is not the top, but to the left or right, to which could, depending on the length of the rail has help.
Antwort von Sascha Schwarz:
No, the Micro is in a spring-loaded stand, with two screws s.der camera is attached.
Antwort von Rob65:
Hello,
could not 2 long distance with bolts and sleeves, where applicable, for 2 to use washers to increase the distance? Know the standard mounting unfortunately not.
Gruss
Rob
Antwort von Axel:
No, the Micro is in a spring-loaded stand, with two screws s.der camera is attached. The bracket looks similar to the unsprung unfortunately the XH A1, whose picture I have here "proboscis" HDV ausleihe blog:
zum Bild As you can see, the bracket is not used here. Imagine instead of the monitor is a microphone or similar spider Accessory shoe on the front. An adapter to any commercially available microphone holder to fasten s.Accessory shoe, there's for `ten at
Thomann.
Antwort von Sascha Schwarz:
Wow - thanks for the Still Image. That shows it really well. The problem is that on my already an accessory shoe sits Headlight ....
Am I the only one because of this "problem" is? :-)
Sascha
Antwort von Axel:
The problem is that on my already an accessory shoe sits Headlight .... No problem. There is a rail of Hama for screwing on the accessory shoe, with an extension (okay, there was at least, I've been around 15 years). Just in a Still Image Retail ask. Otherwise, the craft would be minimal effort.
Antwort von hmGast:
... with a similar problem has been so helpful to me:
http://forum.slashcam.de/viewtopic.php?t=56244&sid=020b64b2991a3cb6a5c9be22ce05b53b
See the pictures of the "rails".
Antwort von hmGast:
... with a similar problem has been so helpful to me:
http://forum.slashcam.de/viewtopic.php?t=56244&sid=020b64b2991a3cb6a5c9be22ce05b53b
See the pictures of the "rails". ... in the left of the post of 18:14?
Greeting
Herbert
Antwort von Markus:
RoVoTech wants 35 ¬ for the rail extension, at Hama cheap microphones "just so" it was? I would almost fall from the chair!
One is no longer available product:
Hama Multi-Extender
Antwort von DWUA:
No, the Micro is in a spring-loaded stand, with two screws s.der camera is attached.
The bracket looks similar to the unsprung unfortunately the XH A1, whose picture I have here "proboscis" HDV ausleihe blog:
zum Bild
As you can see, the bracket is not used here. Imagine instead of the monitor is a microphone or similar spider Accessory shoe on the front. An adapter to any commercially available microphone holder to fasten s.Accessory shoe, there's for `ten at Thomann. Hello Axel,
without the above tracks and similar problems - (apparently the best
solved) - to want to push Page:
Extra thread opening unnecessarily.
On your picture (or "trunk" borrowed) is the excerpt of a monitor to see.
* curious *
Those who can, along with "trunk" of course, this information?
Interested perhaps synonymous others in this community.
It is NOT to control or monitor picture quality. This is about the
difficult situations, at least somewhat
the
picture control.
Who has good experiences with the extra monitor / display?
Ergoogelt so far:
X4-Tech Zelo M8 LCD Monitor, VGA, 8 "
at Conrad.
Who wants more to report, like ..
Antwort von Axel:
In Wolfgang "proboscis" famous
HD Blog
Neither here nor shown "X4-Tech Zelo" (the "live" at Conrad billo looked pretty, but what he is not) can, moreover, per se, the Picture "freak" (vertically and horizontally = upside down) , which is interesting for my 35mm adapter would. One could, of course, the whole screen upside down.
Antwort von Markus:
... Picture the "freak" (vertically and horizontally = upside down), which is interesting for my 35mm adapter would. One could, of course, the whole screen upside down. ... or the camcorder (such as
here
Antwort von Axel:
... Picture the "freak" (vertically and horizontally = upside down), which is interesting for my 35mm adapter would. One could, of course, the whole screen upside down.
... or the camcorder (such as here seen). This saves you only rotate in the Postpro. At least for a heavier camcorder should instead of a simple Rails framework supporting an entire building, so that the camera not only from the tripod thread is held.
And neither in the display still Viewfinder Picture one sees the "right": They have their own flip, which is unfortunately not all cams with small magnets can listen on.
Conclusion: Either a Letus Extreme (or unaffordable luxury adapter) or an external Monitörchen.
Antwort von DWUA:
Hi Axel!
... the X4-Tech Zelo "(the" live "at Conrad billo looked pretty, but what he is not) ... Do you expect that he is better than it looks
or that it is not worth what it costs?
That is truly not much ...
Should only be suitable to Ausschnitt better control.
Usbei photographs from "over head level" - in other words (synonymous)
below not to be heavy cameras - on
mobile telescopic monopod attached; etc.pp
Since this is relatively seldom used, would be somewhat costly nonsense.
Thanks in any case for your above answer
:)
Antwort von C.I.W:
I am looking for since yesterday after a part that has a microphone and s.anderen threaded end of connector accessory shoe. Something there is certainly, I know, but unfortunately not according to what I term to search for.
I want to spider my microphone on my video camera to use.
Antwort von Axel:
I am looking for since yesterday after a part that has a microphone and s.anderen threaded end of connector accessory shoe. I do not synonymous every thread in
detail. Guten Rutsch!
Antwort von C.I.W:
Oh, I've never seen. But anyway thank you and also happy.
Antwort von widibum:
Monitörchen Why not?
Not long ago, was our host of wasted material.
Just a small example:
Nesting, eggs, breeding, care, "live" and
not "civilized"
Conditions to be documented, namely, through thicket and scrub
m in over S.2 Height up very carefully to film and the
Rarely object to disturb.
Anders on Crevasses in caves, demolition of dilapidated buildings, to comply ( "bungee") bridges, trams, ...
The Camera (s) on "Boom"
had (s) as often "blind" filmed!
The picture quality itself was good.
Unfortunately always the same:
80% due to the committee only "sensed vision."
"Selection of chance" was our principle.
Has the advantage that not too long scenes (respective) are
;)
Lately, sprout everywhere but "disposable" Monitörchen from the ground.
The committee could be minimized.
All the best for today!
And
s.morgen! ;)
Antwort von DWUA:
All the best for today
and s.morgen (especially for wowu)
was of
DWUA
