Frage von Silas und Nele:
So, Silas and I have a film on the Canon MV 930 rotated (incidentally there is a very good camera, we can only recommend it). However, we have a small problem, undzwar the film on the computer to make! How did everything wired but the computer recognizes the camera on. What have we done wrong?
Thank you in advance and many affectionate greetings
Silas and Nele
Antwort von Markus:
See here:
FireWire FAQ">Camcorder / recorder s.PC connect, capture and edit images
Antwort von Silas und Nele:
naja we must admit that we still lay in absolute terms are camcorder. (they could us again on the "German" explain? perhaps you need a cd-rom?
liebe grüße
Nele and Silas
Antwort von Markus:
So far there have been no complaints about my instructions. At what point do you not understand this next bit or not?
Antwort von silas und nele:
We find the cd not, for example. Is there perhaps a software on the internet to download?
liebe grüsse Silas and Nele
Antwort von nele und silas:
the capture. What is this? Called as the herüberladen on the computer?
Antwort von Bernd E.:
We find the cd not, for example. What kind of searches you do? For dubbing of the film on the calculator you need but no CD?
Gruß Bernd E.
Antwort von Bernd E.:
... Capturing the so-called herüberladen on the computer? Yes. Perhaps you should look to the writing of Mark's article linked above and read (as would be synonymous the dringestanden ...).
Gruß Bernd E.
Antwort von nele und silas:
What else? The computer recognizes the camcorder (canon mv 930) not. Usage because we do not synonymous software?
Antwort von nele und silas:
already, we have synonymous but we understand that no single foreign word, such as capturing what is quite frequent. we now have to play our camcorder, usb cable and nothing happens inside because you need something but bedstimmt?
Antwort von streetbiker:
So if you have everything right and you have firewire connected to your editing program to detect synonymous nix true then most likely something is not excessive software. Look to the Manual of the Cam. Is there anything of drivers or CD-ROM?
Antwort von Bernd E.:
usb cable inside Heaven help, why USB? Firewire would be the correct cable! But that really is absolutely clear in Mark's article!
Gruß Bernd E.
Antwort von nele und silas:
achso! where will this be put?
Antwort von streetbiker:
is usually supplied as?
Antwort von nele und silas:
why is it in his text but firewire or usb?
Antwort von Bernd E.:
where will this be put? On one page in the DV-output of your camera, on the other to the firewire jack on your computer.
is usually supplied as? No, not usually.
Gruß Bernd E.
Antwort von Bernd E.:
why is it in his text but firewire or usb? Better and easier than Mark's in his article, I can at best will not be formulated, so again the Tip: Read the text carefully, the answers to your questions there!
Gruß Bernd E.
Antwort von streetbiker:
So, Silas and I have a film on the Canon MV 930 rotated (incidentally there is a very good camera, we can only recommend it). This should probably be en witz. Here in the forum will be partly about ¬ 10,000 Cams discussed and it comes with its canon of 930 MV. This is often synonymous s.den ¬ 10,000 Cams rumgemeckert and it comes forth with the assertion that your "170 ¬ at Ebay Cam" a "very good Cam" is.
... No further comments ...
Antwort von Markus73:
[...] It comes forth with the assertion that your "170 ¬ at Ebay Cam" a "very good Cam" is. Is all a question of the position. I had just wondered how such a verdict may be even before the camera is the first film has coaxed :-)
Gruß,
Markus
Antwort von streetbiker:
Ich hab mal in the Mac they sow in combination of a live monitor view ...
And here is synonymous with the laity surely clear that they are not with a NVGS 500 or compete kann.Oder HDR FX1?
