Logo Logo
/// 
NTSC DV-Band in Adobe Premiere

NTSC DV tape in Adobe Premiere



Frage von selkie:
April 2008

Hello,
I have an urgent question:

I am now at the trial failed, my DV tape that I am in the usa on a NTSC camera (DV? HDV?) had on my PC in ADOBE PREMIERE einzuspeisen.
I have my camera with NTSC function borrowed and with the best (Beginners) know everything so that it would work (conversion of PAL to NTSC etc). Outward and again (?), I was able to record a clip. Time it, sometimes not without that I would have been adjusted slightly.
The picture on the screen was broken on the camera but ok.
I could always synonymous Camera control via the PC. however, agreed with the time code is not sudden more ...
So some clips I could aufnehmen.Dann something rose from the Camera? The program?
Then I took it on a MAC with Final Cut-probiert was not at all.

Can it possibly be due to synonymous, that I may be in the recording had a DV camera and the HDV Camera today was?

About Help I would be very happy!
best
selkie



Antwort von beiti:

Will the playing of the tape with a borrowed camcorder otherwise flawlessly? So you can eg s.Television or on the camcorder display the video without problems then, as long as no connection to the computer is?



Antwort von Markus:

"selkie" wrote:
I have my camera with NTSC function borrowed ...

That would not have been necessary, because some DV Camcorders (PAL; even cheap models) and can play NTSC via firewire s.den Calculator pass. Not always is this functionality in the operating properly documented.








Antwort von miku:

the play of the DV tape on the camera has worked flawlessly.



Antwort von beiti:

Would synonymous helpful to know whether it is in DV or HDV was recorded. Because if it was American HDV, this is 60-Hz HD and thus neither PAL nor NTSC (synonymous when one is often easier said). So the NTSC setting in Premiere, there is may not the right thing.

And one more thing: Which version of Premiere was it?



Antwort von selkie:

tja camera in the usa was not mine and I did not care whether or not DV or HDV

The program is Adobe Premiere Pro 7.0



Antwort von beiti:

"selkie" wrote:
tja camera in the usa was not mine and I did not care whether or not DV or HDV

The program is Adobe Premiere Pro 7.0
Can Premiere Pro HDV überhaupt already processed? I believe this is only s.Version 1.5 (and even there it is still an HD plug-in to download).

So that would be a declaration, if the original act to HDV.

In this case, it should be possible, however, playing the DV camcorder to output runterzuschalten. What kind of camera is it?



Antwort von selkie:

So first of all many thanks that you are trying to help me!
the camera, I have returned, because the rent is so expensive.
it was a SONY HVR-Z1E.

the bands are but no DV and HDV ... but honestly, I do not even technically what the difference is.

indicative of the premiere with is interesting. However, why then I could record clips? a few times has the geklappt yes ..

and I was able to obviously synonymous a function PAL / NTSC Click ...



Antwort von beiti:

"selkie" wrote:
the bands are but no DV and HDV ... but honestly, I do not even technically what the difference is.
The tapes are always the same, but it may, alternatively, DV or HDV it be the looks of it, unfortunately, not outside. DV is standard definition video, HDV is high definition video (a development of the DV standards).

Quote:
indicative of the premiere with is interesting. However, why then I could record clips? a few times has the geklappt yes ..
As you use the camcorder is no longer available, you can at the moment nothing more synonymous to experiment.

Since the principle SonyZ1 all relevant standards (ie everything on DV cassettes can be on it) can play, so it should work one way or another. Perhaps it s.irgendeiner menu setting. Or s.Premiere. Or the Firewire cable is simply a loose contact. Remote diagnosis is difficult.

It may well be that your version of Premiere synonymous can capture videos, not with the current project data. It would therefore be possible that some pieces you NTSC or HDV -60've recorded, although those with your first version is not (or at least after rendering) smooth can be played back.

You could now already on your hard drive packages are analyzed. If you have these parts in the Premiere Project window, you are but every time the clip information, such as the resolution (soundsoviel times soundsoviel pixels) and the framerate (fps soundsoviele). With this information we can draw conclusions on what kind of format it is.
720 x 576 pixels at 25 fps is PAL DV,
720 x 480 pixels at 29.97 fps is NTSC DV,
1440 x 1080 pixels at 29.97 fps HDV is at 60 Hz,
1440 x 1080 pixels at 25 fps is in HDV 50 Hz



Antwort von selkie:

the fire wire cable was in order, I think.
did not the appearance of a loose contact, etc.

the clips have the formats (?): 720x480 (1.2), 29.97 fps

good night!



Antwort von beiti:

"selkie" wrote:
the clips have the formats (?): 720x480 (1.2), 29.97 fps
This is NTSC DV in 16:9 (ie not HDV). The premiere 7/Pro should be able to process.



Antwort von selkie:

Thank you!








Antwort von mellone:

Hi,

I have a similar problem:

I have a MiniDV Video from the U.S. to receive the image on the camcorder monitor is OK, but when I try to capture (with no preference whether or Scenalyzer premiere), then I see the video dismembered on the PC monitor. A Video by myself with the camcorder (SonyDCR-TRV50E) had, I have this problem. On the PC is WINXP SP2 installed, the Microsoft patch (Msdv.sys) I've recorded, but had nothing.

Please advice



Antwort von Markus:

"Mellone" wrote:
... then I see the video dismembered on the PC monitor. With a Video [...] I myself had, I have this problem.

In this case, the capture no problem with the computer to do. Experiment in case of doubt with times



Antwort von siematic:

So first you need a camera that can play NTSC format (see above)

for me it turned out that my adobe premiere program itself is obviously back on at a new location is sought, which had no capacity (eg path F, my external hard disk but G) .. which I had not noticed. So one should always use the definitions reviewed.

then there are camera s.meiner a function in which one of 50i to 60i must change. which I had not synonymous, because was shown that auto ntsc read.

for me now everything works flawlessly

of other synonymous could be a bad cable



Antwort von siematic:

Hi Markus,

thanks for the tip. With WinDV I can now flawlessly capture.




Antworten zu ähnlichen Fragen:
Premiere Elements 1.0 nur NTSC?
Adobe Engineering Hours: Was wünscht Du dir für Premiere Pro? Klartext mit Adobe reden und CC-Abo gewinnen
Gaffa Tape extrabreit
Adobe Premiere
Adobe Premiere Pro
dv import in adobe premiere 1.5
Tipps zu Adobe Premiere 6.5
adobe premiere pro 1.5
3 Fragen zu Adobe Premiere
Camcorder -> immer Akku + Tape raus?
Export to tape: dropped frame - Problem
Superhuman Tape Measure Skills DEBUNK
FEELWORLD FW279S (3G SDI) + D-Tape anschließen
Fragen zu Adobe Premiere pro 7
Neues Adobe Premiere Update
Frameserver für Adobe Premiere?
Ton Aussetzer in Adobe PREMIERE CS 6
Adobe Premiere Farben invertiert
Adobe Premiere Pro Blitzeffekt
Adobe Premiere Transition Packs
Adobe Premiere CC2017 released
Adobe Premiere Pro Streaming
CineRangeFinder = Cine Tape für Indies (crowdfunded)
Adobe Premiere Pro 2020 - TITEL
Adobe Premiere CC 14 und CC15.3 Installer
DVD mit Adobe Premiere 6.5 erstellen

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos