Frage von Fiesepeter:
Hi,
Have today, after about 1st month break mal wieder was recorded on my gs-75. Where were all synonymous ok.Dann playing shows in front of the picture black beams in the same size and synonymous with equal distances to each other. The bars cover about half the picture. The Kammera displays this error synonymous with old and other bands.
I found when surfing the following: http://forum.slashcam.de/sony-trv320e-zeigt-balken-im-display-kostenvoranschlag-330-vp149756.html.
Seems to be acting the same problem, help me, unfortunately, not particularly because it is not a next refers to the gs-75.
Would be very grateful for helpful hints.
MfG the Fiesepeter
Antwort von oliver II:
Hello Fiesepeter!
Have you ever used a cleaning tape?
Antwort von Fiesepeter:
Ne
But in the low maturity of the Camera (max. 10 hours) synonymous net, I can imagine it is very dirty.
OLEOLEOLEOLE
Did the Cam today and she goes back again tested properly. Did the tape recorded a couple of times and entering it from. Perhaps it was only synonymous with the long "lifetime brought" something.
Can geclosed werden.
Thanks for the quick reply.
MfG the Fiesepeter.
Antwort von Markus:
From the description, the cause is quite clear:
SonyDCR PC 330 - recording problems ... and what you can do about it:
Camera shows while watching gray vertical stripe Ergo: too few pre-recorded tapes can even lead to such a problem if one of the tapes is problematic and leaves a lot of rubber in the drive.
Furthermore, it is not good to leave a tape in the camcorder when it is then for weeks. The tape then gets stuck at uUsder head drum, which in turn leaves annoying residue.
