Frage von krummhorn:
Hello!
A few months ago was in the PC video Tripod presented above:
Fluid damping, hemisphere 65 mm, Height max. 1.50 m. The test was
positive, the unverb.Preisempfehlung is 150, - to 199th - ¬.
I pointed out in accordance with the google search internet prices.
Extraordinarily: 110, - ¬ + shipping (5 ¬), the Versanhändler from Bremen
www.fotopoint.de for Bilora have 936.
This was so tempting I ordered it in advance and received
it 4 days later well packed.
The surprise was groß.Das Tripod acts like a small issue
Profistativs.Die damping is a very smooth, but fixed, can be
However, by 2 good looking set brakes, 65 mmHalbkugel.
built-in balance spring, legs + ok terminals, spikes and herausdrehbare
Rubber feet, well-read Wasseraage etc ..
After several days of testing with my HC1, and my Canon HV20
Canon XM-old lady, I 1 was highly satisfied with Tripod.
A fantastic addition to my S8 from time Sachtler "Holywood (!)
coming-and now the second .. The Tripod "Holywood" had a fluid head, no damping settings and very inaccurate brakes ... but at that time cost about DM 1000, -.
Well .... the highlight of my new tripod now:
I got the part irendwie known before .. LIBEC floated through my mind .... fast aud the Page of www.libeceurope.com and then?
Check out time on the Web site of the Libec "Libec TH 650 DV" to.
In the explosion drawing on the TH 650 is more than clear that this tripod to the smallest screw to the Bilora 936
equivalent, so it is not a proprietary development of Bilora, sondenr a supply or a replica of the Japanese manufacturer.
According to Google searches, the TH605 DV for about 260th - ¬ sold, an identical copy of Bilora for 110, - ¬ only anden.
This is for people who have less money, a good question ..
I mainly wrote this story.
Schöne Grüße jürgen
Antwort von KlausZ:
Power is indeed a valent impression.
In direct competition, I would because the Velbon DV7000, whereby the Bilora actually looks a bit more stable.
Questions s.den "Tester":
- Is the synonymous a real fluid head (ölgedämpft)?
- Are there any accessories as synonymous, a quick release plate?
- The DV7000 has indeed between head and tripod again be reviewed (with Schraubenfestiger), see synonymous
Antwort von Bespi:
because like you are right.
walimex the tripods come in reality synonymous Chinese weifeng. there will probably be similar.
http://www.walimex-shop.at/product_info.php/info/p333_Walimex-FT-9902- Video-Pro Tripod.html
http://www.weifengchina.com/pro/index.asp?page=2&id=38
weifeng sells the same stands under 3 different brands: e-image, and Fancies walimex.
Incidentally, you were here and the Bilora walimex ft 9902 (ca.270 Euro) tested and the average walimex even better.
http://videofilmen.schiele-schoen.de/zeitschrift/allgemein/archiv/preview.asp?f=vf20805048.pdf&s=12984
lg.
Antwort von krummhorn:
Hello
The Pro 936 has a full metal head, the 1.5 n.wiegt alone.
The tripod weighs 3.1 kilograms in total.
The transport berägt length 75 cm.
The head is a true fluid head. There is no difference
Settings, with the two brake levers, however, it is the
Damping strength set very sensitively.
The target test in "video" I know, was actually the first
Recalling the Pr 936th The larger Walimex there is special mention because it is more the professional rail served (8.6 n.schwer and
Suitable for cameras up to 8 kg).
Of course the 936 is still a beginner Tripod when the Materaleinsatz possible and feasible in Stativbau, however, continues.
But for users of smaller cameras, which are usually not professional
work is primarily the price performance ratio is a wonderful
Alternative to the current offerings. Velbon The 7000 is like the 936 in every Bezihung inferior (no hemisphere, no balance spring,
no spikes, etc.).
My dream would be the way a tripod Vinten Vision 3.Aber with the so -
a tripod will cost approximately 20-times the per Bilora the 936th
Schönr greetings jürgen
Antwort von Daveee:
Are there any other experiences with the aforementioned Tripod? I currently Schwanke namely between the Velbon DV7000 and this here (Bilora Tripod Pro 936). Camera is a Canon HV30 ...
Antwort von josogehts:
Hello,
am also in search of a tripod in the approximately 100 ¬ price range.
Bilora prefer the
Pro 936 and the
Velbon DV -7000. Had the opportunity today to the Velbon Tripod closer look and am already convinced of Velbon. Power everything a solid impression of what I particularly like is the wide spread legs, so a relatively safe state, but I found the rubber feet are not as good as extreme spread, the requirement of the feet on the ground is quite low. It would be better angled such spike feet with it.
So, now my question. Is this also Bilora with a wide leg spread that the pans are similarly good, as when Velbon?
I'm not very experienced, but the Schnautze full of the eternal shaky shots. Since I do windsurfing shots, should the Tripod enormously stable, because, as I say almost only during heavy storms and wind up with max. Zoom filme.
Thanks and greetings
Antwort von krummhorn:
Hello!
Lies doch mal bitte my early entry in this thread ...
because I perform on the Pro 936 Tripod The report is not
Development of Bilora, but a replica / a license or purchase of LIBEC. At the site of dog Libec can you watch the original, which is absolutely identical with the Bilora is (Libec TH 650 DV) is.
Some posts later I have the disadvantages of the mentioned Velbon 7000. Is added: Bilora 3.2 kilograms Velbon 3.45 kilograms.
Tripods Both funds have a spider, with the spreading of the legs in both very far. A means spider is for your Filmerei advantage of,
because you have very simply can attach additional weights (eg
a full 2 liter bottle of water) for greater wind strengths.
The best course would be a direct Vegleich ... but suspect that in any store will find both parts.
The Bilora is currently - in my opinion-to price and performance
(110, - to ¬ ..) one of the best entry-level stands.
Schöne Grüße jürgen
Antwort von Daveee:
Have the Bilora ordered yesterday and next week will be a comprehensive test, including pictures make.
Antwort von ghostpictures.de:
Did my Bilora today and get the same times made a test video. Have fun.
Antwort von Kino:
Power is not too much advertising - now costs 159.90 + Shipping
You guggst: http://www.fotopoint.de/hersteller/bilora/bilora-video-pro-doppel-profilio-936.html
Antwort von ghostpictures.de:
I habs here: http://www.digitfoto.de/infosproduit.php?id=BILORA936&pdb=4
119 euro. = P
Antwort von Isekram:
....... has Bilora only 1.51 m Height?
Is a little bit of a Videostaiv I find!
Antwort von moeglich:
Did my Bilora 936 Tripod synonymous ordered - for 112 euros. It's because of the many plastic parts so no idea how high my Velbon DV 7000, but that it has the head of the hemisphere and with rotating rubber feet and spikes, is so versatile.
I have looked at the building almost the fingers clamped, so the legs were firmly locked. The second time I have with more respect and sensitivity s.die Case approach - already better.
The tripod is stable, the head can tilt and rotate slightly. I like better than the Velbon.
Then the negative surprise: The dragonfly s.Videokopf is built wrong. Air bubble in the zero mark - but the hemisphere is in the wrong version, though the tripod is absolutely just and equal to all the legs are extended.
I will now Tripod with the help of another canned Libelle straight from the dealers and then align a new zero-mark on the built-vermurkst Standard Libelle affixed.
Conclusion: Processing as for the price to be expected rather cheap. The crooked canned Libelle is real botch. But the disadvantages are in the background, when I see that I am now just over 100 euros a double tube with Tripod hemisphere have.
My old Velbon DV 7000, I have now at Ebay reingestellt.
Antwort von Rolf Hankel:
Are there any other experiences with the aforementioned Tripod? I currently Schwanke namely between the Velbon DV7000 and this here (; Bilora Tripod Pro 936). Camera is a Canon HV30 ... Hello
Did the Bilora HV 30 with a longer in use and after some modifications'm more than satisfied.
On the left is something Page Fluid from a 1.5 mm O-ring seals the gap from now, no more fluid leakage.
The Arretierhebel for the vertical motion, I removed the lock, the camera always something verkantet, I have now locked in the middle s.Drehpunkt with a big twist and everything is fine. But without synonymous Bastel work, a recommendable tripod with a very good price-performance ratio
Gruss Rolf ...
Antwort von Bruno_Banani:
Is it possible instead of the supplied head, this head Manfrotto to fit?
http://www.pro-digital-koblenz.de/shop//stative/manfrotto-stative-koepfe/manfrotto-videoneiger/manfrotto-videoneiger-700rc2.html
In other words: Is it the head of the tripod above the Bilora hemisphere exchange? The Manfrotto head has a flat base plate (with 3 / 8 "connector).
