Infoseite // Of HV10 HDV to PC - how?



Frage von kiteschlampe:


Hi,

ict my name is Chris and my first Fret here. My question (The search is not helped):

Have me a Canon HV10 fetched. Now the question of capturing. In the past, I am accustomed to using Firewire (SonyVX2000) the data easily with Ulead (MS7) single, which works pretty well synonymous, synonymous if the options in Ulead are somewhat meager.

MS7 does not work with HDV, so I have the trial version MS8 tried, will not do. Also VS10Plus does not (the trial).

In systray of Windows is no appropriate drivers installed for the HV10. Also on the Canon website to find nothing of the sort.

Who has experience, or the problem solved? I would like to Matrial my HV10 HDV via Firewire without additional hardware capture.

Possibly. jemend knows a program or driver NEN has discovered?

Danke erstmal s.alle, a happy new 2007 and have fun shooting.

Chris

Space


Antwort von Bruno Peter:

So my HDV camcorder HDR-HC3 is the operating system W-XP Prof. + SP2 so recognized:

zum Bild

Is it not so with you?

Space


Antwort von kiteschlampe:

Hello,

Unfortunately, no. If I connect via firewire part, announces Windows: they want to manual install the drivers or software are looking for?

Search for canon and microsoft was unsuccessful, I need, in principle, NEN Drivers for the Canon HV10.

Why has not something Canon is a mystery to me?

Did the Canon product CD when it was not there and can not say whether as a driver it is, I'm just in Brazil and CD does not come s.die ran.

At the Canon Website in any case is nothing to find.

Maybe can someone who is here mitliest and the CD has tangible, sometimes to see if the drivers because it is.

Would be very connected.

Gruss Chris

Space


Antwort von Quadruplex:

Goes with HDV SPlitCapDVHS

"kiteschlampe" wrote: my first Fret here
Beautiful .... Greetings of flint thread :-)

Space


Antwort von kiteschlampe:

Geht leider nicht. I think I've isolated the problem. Had no drivers for the Cam.

Now the question arises, how can I get a bokommen, or which program is capturing that includes drivers.

Have now seen in a AmiForum that it synonymous with his Sony Driver funzt?

Or maybe someone has the drivers ready for the HV10? There Wenns ;-(

Greetings and thanks for the help.

Chris

Space


Antwort von kiteschlampe:

Today I s.die remembers good old days.

How to spend hours s.der Autoexec.bat or Config.sys
rumexperimentiert has to 5kb more memory to win.
Jaja, Dos, which was what.

Anyway, the problem solved and I'm just
(after a full day) again as it was then.

What happened?

Sometime in Early Linux, I have a hotfix package for the
SP2 installed.

Although on my system, only the SP1 was installed.

Sometime in the Auto Sysupdates of Windows has seen this and Windows is assumed that the SP2 is installed,
because the hotfix was new.

In any case I've found, and uninstalled this hotfix package
- Brought nix. Windows will find the automatic investigate the carrot does not mean that the SP2 is not on it.

Have now the manual downloaded SP2, installed and lo and behold: sound goes, PictureQuest not a partial success.

Next Sought, No Hotfix: KB885222 solves the problem with firewire on some configurations occur: funzt it!

Thanks Microsoft, that you have me after all these years, once again a full day has searched for a little problem to solve. YEAHHH!

Other synonymous Thank you for the help, DAS nobody could really know.

Chris

Space


Antwort von Eva Maier:

If you still Autoexec. Ba and Config, systems can then edit the new nicts so that at the Billie abused as a beta tester.

/ E

Space


Antwort von kiteschlampe:

Eva, I'm a fossil, which tries desperately to connect not to lose.

But time is always faster ...

Space


Antwort von Eva Maier:

And what's hotfix

One is called I believe SBP2
and the other is for 1394

/ E

Space



Space


Antwort von kiteschlampe:

KB885222

Then gings.

What is SBP2 - kenn ich nicht.

Gruss Chris

Space


Antwort von Eva Maier:

The SBP2 called patch KB904412
This is because if USB or IEEE is not stable - just as is and disappears.
If I have understood correctly identify the SBP2 devices.

The KB885222 I have the patch in 1394 because I saved with the number can not start.

/ E

Space


Antwort von mal ne Frage:

Hey Chris,

In Windows Explorer appears my HV10 not synonymous, MAGIX Video Deluxe 2007 PLUS, however, with the detection and control via Firewire no problems.

That's all but synonymous already. Despite the support of HDV Video Deluxe 2007 PLUS is the result of the transferred material simply "dis ..!

Like when you look like? What kind of software you transmit? What is your picture from? Your sound is so synonymous mega bad? Even with a recording of a church tower, whose bells bimmelten, you can hear the drive. I'm currently really totally sour on the Cam.

nice day ...

André

Space


Antwort von Markus:

"André" wrote: Despite the support of HDV Video Deluxe 2007 PLUS is the result of the transferred material simply "dis ..!
Did you monitor the s.PC assessed? Perhaps even in the preview window?

Learn More:
Video recordings s.Computermonitor not look good

Space


Antwort von padrino:

"Eva Maier" wrote: The KB885222 I have the patch in 1394 because I saved with the number can not start.
/ E

The patch eliminates problems encountered with the SP2 might arise. Problems that affect the IEEE1394. Bei mir hats gefunzt thereafter.

@ André:

The stream that is based on the DV tapes for HDV is stored, means m2t and mpg is a stream, so no more DV Avi type.

Most capture programs read a stream and store the same as mpg, which I believe is not so good.

For capturing, I use: "CapDVHS", so I have the best results are clear, tell the application if you need proggi.

Then I let 'mpg2repair "drüber to run the file to clean and repair, I think this is the GOP structure jewils front and rear adjusted.

Edit (cut) I am doing in Ulead MSP8 (currently test version) I MSP7.

I do rendering synonymous with Ulead, but in a DivX.

The sound is not good for Cam, I do, however, much more synonymous value to the Picture, because my films usually extra Verton, ie DV material not hernehme.

As for the picture is concerned, I myself now have to learn that MIST is HDV. Am I Still Image, super quality, with moving subjects or panning, you can safely discard the material.

The reason lies in the data reduction and compression of the material. I declare myself the way that the picture of Cam while class is in moving images (film), but by the amount of data that generated the raw material will be nullified.

I'm kitesurfers synonymous kiter and movies and what s.Ende rauskommt kannste since forgotten, but that should in all HDV cams so, ever since the Strém max. Is 25000 kbps.

Although I have reservations because the HV10 delivers yes "true" 16:9 and not 4:3 with rectangular pixels. Ergo 1920 x 1080 pixels = 2.07 million which is synonymous of the SPECIFICATION.

For most other HDV cams do you have but "only" 4:3 HDV at 1440 x 1080 pixels = 1.55 million pixels. The 16:9 is produced, that the pixel width is increased.

The picture quality costs more information, at least arithmetically.

In short, just because I'm in Brazil does not work that way when I'm back home, a second HVD with 1440 x 1080 and tested if the result is expected to fail more, the HV10 on Ebay.

Gruss Chris

Space


Antwort von carhop:

I've tried with Nero Vision and the HV10 is recognized!
Import works only synonymous jerky my laptop because it's not very fast.
Normally I work s.Mac and that there is no problem.
A trial version of Nero can page loaded.
Gruß Michael

"kiteschlampe" wrote: Hi,

ict my name is Chris and my first Fret here. My question (The search is not helped):

Have me a Canon HV10 fetched. Now the question of capturing. In the past, I am accustomed to using Firewire (SonyVX2000) the data easily with Ulead (MS7) single, which works pretty well synonymous, synonymous if the options in Ulead are somewhat meager.

MS7 does not work with HDV, so I have the trial version MS8 tried, will not do. Also VS10Plus does not (the trial).

In systray of Windows is no appropriate drivers installed for the HV10. Also on the Canon website to find nothing of the sort.

Who has experience, or the problem solved? I would like to Matrial my HV10 HDV via Firewire without additional hardware capture.

Possibly. jemend knows a program or driver NEN has discovered?

Danke erstmal s.alle, a happy new 2007 and have fun shooting.

Chris


Space


Antwort von dlp:

Ihrs Hello!
I've got this problem my DV Cam (Canon MV850i of) does not recognize. So it is detected in Device Manager, but to me the following note about this output:

Quote: The device driver for this hardware can not be loaded. The driver may be corrupted or missing. (Code 39)

The patch KB885222 KB synonymous unfortunately brings me no piece next. I have a version of Windows XP with SP2. Do the Cam but synonymous already s.einen other PC (also XP + SP2), and because everything went perfectly ...

Has someone an idea? Thousand times thanks!

Space


Antwort von Hv10Newbee:

Hello Kiteschlampe (i like!)
I have purchased just a HV10 and was a little disappointed with your statement that moving images are not as good across. Can it be that you get the "Image stabilzer" had not turned off?
(just to be sure ....;-) That goes not in the car mode). Sorry if the question is stupid, I would be only happy if the thing but what would suck ...
Otherwise, I have way, with the "HDV Split, an open-source video software videos are quite good at getting the search. The picture looks not so great we are on the HV10 screen, but that's probably always so (see above).
Gruß,
Björn

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash