Panasonic HDC-SD300 see video recording directly from the PC / transfer
Frage von schmiar: Januar 2011
I have had for some time, a Panasonic HDC-SD 300 that I want to use for video recordings in therapy sessions (with the old Canon via FireWire, there were sound problems). The camera is difficult to reach in a closet and will be linked directly with the PC. I would like to save the video directly on the PC control (s.besten without buffering and import), or at least the camera on the PC. When I connect my PC now s.den, filming them not, and I have to click until the display that I have connected s.den PC (which I had in the cupboard kllettern, take out the camera and adjust afterwards). Is there a solution praktikabe? I use Magix Video Deluxe 16 and 17 The Panasonic HD Writer software AE is synonymous with Panasonic's Internet-patch for me not to Windows 7 (at startup error message).
Thank you for the help in advance
Dr Arne Schmidt
Antwort von Frank B.:
I can think of as spontaneously only three possibilities:
- Capture via HDMI - In This requires additional hardware / s.PC - Capture of analog outputs and Grabberbox and A / D converter; disadvantage: it works only in SD or back synonymous with expensive additional hardware in HD - With an SD card, which enables WiFi (so I have no experience)
With all three options, but no control of the camera is possible. This could allow you to remote control.
Time interest sake - who served as the PC in a therapy session? The physician should not there be talks with the patient and not somewhere s.PC sit and press shutter button and zoom? What would be so bad s.der recording in the camera and the subsequent import into the calculator? There is something going with the banddlosen systems quickly. Not that I am As for, but maybe I can think of in an understandable reasons other solutions.
Antwort von schmiar:
thanks for the reply.
I like children and adolescent psychiatrist and film-specific test situations am (autism). I am talking continuously with the patient and do not sit s.PC, the camera is filming around 1-2 hours non-stop, and now the recordings are stored directly on the PC, where I can edit some point after the next meeting. Focus, sound, etc. are kept during the recording, the monitor, I turn out. went with the old technology, the problems ... not only with the Panasonic. When connected s.den PC, they can not even be remotely ... I need the camera to the recording each time to get out of the closet to play the video, then align it very cumbersome and again ...
Antwort von Frank B.:
And as it is with the on-and off the camera? So you have to but ran synonymous to the device, right? What camera was the first before the Panasonic was purchased and how it was with the with the on-and off? As with the signal was transmitted? If the camera in the cabinet on or off, which is so synonymous with climbing connected, one can simply remove the SD Card synonymous with a card and - capture reader into the PC. Must it be for recording a high definition signal necessarily sufficient or possibly an SD signal?