Frage von LS-Film:
Hello, I cut my movies in Magix Video deluxe 2008 plus.
I have problems with the dubbing of comments. Work with a Shure SM 58 microphone s.einem the Sirus MXP 602 mixer is connected to my host and device is a SonyMD MZ-R35.
After everything I spoken material in Magix record, I have great controls, scratching, I do not know exactly how I can describe. You certainly know what I mean.
Would be very grateful if any one can help me.
Schöne Grüsse aus Petersberg near Fulda
M. Leinweber
Antwort von thos-berlin:
First question: Is the sound when playing from the minidisc player zb on Headphones or stereo system still OK?
If No: Can you s.MD player disqualify the sound?
If "Yes", what is the MD player s.den PC? (On the PC audio line input?) Do you have the option when restoring the PC to run Aussteueringsanzeige? That sounds a bit overdrive ....
Magix If the (display) is not, then take a look a (cost-) free audio tool (eg Audacity) to read. Since synonymous display are integrated. The resulting WAV file, you can capture synonymous in Magix.
If an overload exists, you can s.PC s.MD or input-output level setting (down)?
By the way: Why do not you speak directly into the PC? Micro s.mixer, mixer s.PC-Line-In. The whole thing with an audio recording program.
In your workflow you digitalisierst the signal (MD), then by analogy to each other again, so that the PC will be digitized again ....
The only advantage: The MD player is probably quieter than a PC, but as synonymous, there are ways ....
Antwort von LS_Film:
Hi MD, I have players with a 3.5 mini microphone input Kinkenstecker s.den made of PC.
Antwort von Meggs:
Hi MD, I have players with a 3.5 mini microphone input Kinkenstecker s.den made of PC. No wonder. Plug the times in the line input of the soundcard.
Antwort von LS_Film:
I see a Ausschlagspelgel but there not! Fuktioneren tuts. Must be louder to the recording you get a rash or?
Antwort von thos-berlin:
Well sorry, it was the overdrive. A microphone input is significantly more sensitive than a line-input.
But s.Line-in you should really see a rash. How is the connection s.Player? Has a separate RCA output or you must use the headphone output? In the second case, you should see the volume player s.MD times increase. Or is an audio-output, but synonymous adjustable?
If RCA or have full volume s.MD: Do you have a software mixer for your sound card? How is because the line-in set?
It must be possible for the sound level so that a Aussteueringsanzeige s.PC significantly ausschlägt, but below the 0 db remains.
Antwort von LS_Film:
I will give it a try. Something else s.ist louder db below 0 or above 0 db? Because the mixer to the scale below p.50 and starts above 0 db to 10 db stop.
Antwort von Meggs:
Where as when Termometer:
Above zero is warmer than below zero.
Antwort von LS_Film:
Hi does it all. Thank you.
